• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.487-499
• /
• 2014

While the vertical open type of heat exchanger is more effective in areas of abundant groundwater, and is becoming more widely used, the heat exchanger most commonly used in geothermal heating and cooling systems in Korea is the vertical closed loop type. In this study, we performed numerical simulations of the optimal utilization of geothermal energy based on the hydrogeological and thermal properties to evaluate the efficiency of the vertical open type in areas of abundant groundwater supply. The first simulation indicated that the vertical open type using groundwater directly is more efficient than the vertical closed loop type in areas of abundant groundwater. Furthermore, a doublet system with separated injection and extraction wells was more efficient because the temperature difference (${\Delta}$) between the injection and extraction water generated by heat exchange with the ground is large. In the second simulation, we performed additional numerical simulations of the optimal utilization of geothermal energy that incorporated heat transfer, distance, flow rate, and groundwater hydraulic gradient targeting a single well, SCW (standing column well), and doublet. We present a flow diagram that can be used to select the optimal type of heat exchanger based on these simulation results. The results of this study indicate that it is necessary to examine the adequacy of the geothermal energy utilization system based on the hydrogeological and thermal properties of the area concerned, and also on a review of the COP (coefficient of performance) of the geothermal heating and cooling system.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.50-62
• /
• 2017

As the use of private cars increases along with the technological advancement in the automobile industries and their capabilities to supply, a wide range of issues are followed including the increase in traffic congestion costs, pavement damages and more. In spite of consistent effort to resolve such urban traffic problems, the modal share rate of private cars continuously increases, thus it is becoming more important to explore the ways to enable drivers to take reasonable measures, in self-motivated manner, by taking part of the transportation demand management policy rather than to rely on the strict enforcement of control policy. Considering that the urban transportation infrastructures are in much better shape than before, it is necessary to implement Mobility Management (MM) that induces reasonable usage of private cars by promoting the change in one's consciousness and behavior through communication. Hence, the research studies the factors that influence the mobility through the survey targeting the citizens of Busan on their awareness on the former transportation demand management policy, to explore the ways to motivate the citizens' involvement in reducing the use of private cars as a measure of Mobility Management.

• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.37-47
• /
• 1999

The spreading fire of very small floating particles after they are ignited is fast and t therefore dangerous. The research on this area has been limited to experiments and global simulations which treat them as dusts or gaseous fuel with certain concentration well m mixed with air. This research attempted micro-scale analysis of ignition of those particles modeling them as liquid droplets. For the beginning, the in-line array of fuel droplets is modeled by two-dimensional, unsteady conservation equations for mass, momentum, energy and species transport in the gas phase and an unsteady energy equation in the liquid phase. They are solved numerically in a generalized non-orthogonal coordinate. The single step chemical reaction with reaction rate controlled by Arrhenius’ law is assumed to a assess chemical reaction numerically. The calculated results show the variation of temperature and the concentration profile with time during evaporation and ignition process. Surrounding oxygen starts to mix with evaporating fuel vapor from the droplet. When the ignition condition is met, the exothermic reactions of the premixed gas initiate a and burn intensely. The maximum temperature position gradually approaches the droplet surface and maximum temperature increases rapidly following the ignition. The fuel and oxygen concentration distributions have minimum points near the peak temperature position. Therefore the moment of ignition seems to have a premixed-flame aspect. After this very short transient period minimum points are observed in the oxygen and fuel d distributions and the diffusion flame is established. The distance between droplets is an important parameter. Starting from far-away apart, when the distance between droplets decreases, the ignition-delay time decreases meaning faster ignition. When they are close and after the ignition, the maximum temperature moves away from the center line of the in-line array. It means that the oxygen at the center line is consumed rapidly and further supply is blocked by the flame. The study helped the understanding of the ignition of d droplet array and opened the possibility of further research.

• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.253-257
• /
• 2003

The suitability of processed cardboard(PC) as litter of broiler house was evaluated by comparing the growth performances of broiler chicks reared on the PC with those of birds reared on conventional rice hull litter(RH) as the control group. A total of 180 male broiler chick (5d old, Ross) were randomly divided into 2 groups and placed into 2 types of litter, PC and RH, with 3 replicates of 30 birds per replicate. Commercial broiler feeds and water were provided ad libitum for 5 weeks. The body weight gains of the birds reared on PC were heavier than those on RH(P<0.05). The average feed conversion rate of chicks reared on PC was appeared to be improved as compared to that of the control. The Enterobacter aerogens counts in PC were significantly rduced than those in the control litter(P<0.05), but a total number of Salmonella and E. coli were not affected by the litter materials. No difference was observed between the average moisture contents of the litters. The average mortality of the chicks reared on PC was significantly lower than that of RH(P<0.05). The results indicate that processed cardboard can substitute other conventional litter materials when the others are in short supply or expensive.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.288-289
• /
• 2011

Indium Tin Oxide (ITO) is a typical highly Transparent Conductive Oxide (TCO) currently used as a transparent electrode material. Most widely used deposition method is the sputtering process for ITO film deposition because it has a high deposition rate, allows accurate control of the film thickness and easy deposition process and high electrical/optical properties. However, to apply high quality ITO thin film in a flexible microelectronic device using a plastic substrate, conventional DC magnetron sputtering (DMS) processed ITO thin film is not suitable because it needs a high temperature thermal annealing process to obtain high optical transmittance and low resistivity, while the generally plastic substrates has low glass transition temperatures. In the room temperature sputtering process, the electrical property degradation of ITO thin film is caused by negative oxygen ions effect. This high energy negative oxygen ions(about over 100eV) can be critical physical bombardment damages against the formation of the ITO thin film, and this damage does not recover in the room temperature process that does not offer thermal annealing. Hence new ITO deposition process that can provide the high electrical/optical properties of the ITO film at room temperature is needed. To solve these limitations we develop the Magnetic Field Shielded Sputtering (MFSS) system. The MFSS is based on DMS and it has the plasma limiter, which compose the permanent magnet array (Fig.1). During the ITO thin film deposition in the MFSS process, the electrons in the plasma are trapped by the magnetic field at the plasma limiters. The plasma limiter, which has a negative potential in the MFSS process, prevents to the damage by negative oxygen ions bombardment, and increases the heat(-) up effect by the Ar ions in the bulk plasma. Fig. 2. shows the electrical properties of the MFSS ITO thin film and DMS ITO thin film at room temperature. With the increase of the sputtering pressure, the resistivity of DMS ITO increases. On the other hand, the resistivity of the MFSS ITO slightly increases and becomes lower than that of the DMS ITO at all sputtering pressures. The lowest resistivity of the DMS ITO is $1.0{\times}10-3{\Omega}{\cdot}cm$ and that of the MFSS ITO is $4.5{\times}10-4{\Omega}{\cdot}cm$. This resistivity difference is caused by the carrier mobility. The carrier mobility of the MFSS ITO is 40 $cm^2/V{\cdot}s$, which is significantly higher than that of the DMS ITO (10 $cm^2/V{\cdot}s$). The low resistivity and high carrier mobility of the MFSS ITO are due to the magnetic field shielded effect. In addition, although not shown in this paper, the roughness of the MFSS ITO thin film is lower than that of the DMS ITO thin film, and TEM, XRD and XPS analysis of the MFSS ITO show the nano-crystalline structure. As a result, the MFSS process can effectively prevent to the high energy negative oxygen ions bombardment and supply activation energies by accelerating Ar ions in the plasma; therefore, high quality ITO can be deposited at room temperature.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.195-208
• /
• 1997

On the basis of the topographic maps in the 1910's and 1990's and the classification map of Landsat TM satellite image photographed on Sept 1, 1996, the spatial distribution and the current situation concerning tidal flats in Korea were studied by measuring the area with GIS Arc/Info system and examining the regional condition required to develop the tidal flats. The results are as follow; The tidal flat resources in Korea cover an area of about 3800 square meters, including the reclaimed one since the 1910's. And they are widely distributed in the west coast of South Jeonla, Kyunggi bay, Asan bay, the south coast of South Jeonla, Kunsan bay, Chunsoo bay, and the coast of South Kyungsang and Pusan when put in the order from bigger area. Given the area under the construction at present, more than 50% of the tidal flats are reclaimed ones. The tidal flats are being developed especially in Kyunggi and Asan bays because they perfectly measure up to the conditions required. For Kunsan bay, a remarkably good supply system of the alluvial sedimentary materials and a favorable coastline requirement for the coast of the South Jeonla also contribute to the development of the tidal flats. In the case study of Kunsan bay, it was shown that the shape of the tidal flat is making a continuous change and the area is getting bigger in terms of the multi-temporal change of the tidal flat development. However, while in the first half of the 20th century, the increasing rate of the area was considered to be rather high, it is considerably lowered almost to a standstill in the latter half of the century.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1847-1855
• /
• 2012

A 1V 1.6-GS/s 6-bit flash analog-to-digital converter (ADC) with a clock calibration circuit is proposed. A single track/hold circuit with a bootstrapped analog switch is used as an input stage with a supply voltage of 1V for the high speed operation. Two preamplifier-arrays and each comparator composed of two-stage are implemented for the reduction of analog noises and high speed operation. The clock calibration circuit in the proposed flash ADC improves the dynamic performance of the entire flash ADC by optimizing the duty cycle and phase of the clock. It adjusts the reset and evaluation time of the clock for the comparator by controlling the duty cycle of the clock. The proposed 1.6-GS/s 6-bit flash ADC is fabricated in a 1V 90nm 1-poly 9-metal CMOS process. The measured SNDR is 32.8 dB for a 800 MHz analog input signal. The measured DNL and INL are +0.38/-0.37 LSB, +0.64/-0.64 LSB, respectively. The power consumption and chip area are $800{\times}500{\mu}m2$ and 193.02mW.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2012

BACKGROUND: Organic fertilizers in watermelon cultivation are widely used to supply nutrient and organic matter. This study was conducted to investigate the effects of application rate of organic fertilizer on the watermelon growth and soil chemical properties in greenhouse METHODS AND RESULTS: The organic fertilizers used in this experiment were mixed expeller cake (MEC) and mixed organic fertilizer (MOF). The treatments were conducted with 4 levels (1.0 N, 0.7 N, 0.5 N and 0.3 N) on the basis of soil testing nitrogen fertilization (STNF) using MEC or MOF as the basal dressing, and using chemical fertilizers (CF) as the additional dressing on the rest of STNF. These fertilizations were compared to CF 1.0 N (0.3 N as the basal and 0.7 N as the additional dressing) and non fertilization (NF). The leaf area of watermelon in treatment 0.5 N and 0.3 N using MEC or MOF was similar to CF treatment. The absorbed nutrient amounts by leaf, weight and sugar contents of fruit in the 0.5 N and 0.3 N treatments were higher than other treatments. In 0.5 N and 0.3 N treatments using MEC or MOF on the basis of STNF, soil chemical properties such as electrical conductivity (EC), available $P_2O_5$ and exchangeable K concentrations after experiment showed tendency to decreasing or similar level before experiment. CONCLUSION(s): These results suggest that the MEC or MOF application as the basal dressing at the 30~50% level of STNF and CF application as the additional dressing on the rest of STNF be best to maintain adequate nutrient of soil and to increase marketable yield for watermelon.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.133-142
• /
• 2014

Recently, more focus is shift to imbalances in aggregate market supply and demand and an exhaustion of natural resources. In this situation, Electric arc furnace oxidizing slag (EAF Slag) has high application possibility as aggregate for concrete due to similar property with general aggregate. In this study, We've got the plan to assure the chemical stability of EAF Slag, and then experimentally tested the mechanical performance and durability for the fine aggregate used EAF Slag. On this test result, we suggest the application plan. At the result of this study, it shows that EAF slag would reduce the surface defect such as pop-out due to natural aging for the fixed hour and adjustment the grain size of EAF Slag. And mechanical performance and durability according to the replacement rate of concrete service, were revealed more than equal or equal compare to general aggregate. Hereafter, quality control must precede not to impede the beauty of concrete surface as assure the safety for aging and processing. And, to establish the environmental resource recycling system for by-products of steel, it should be made development of various application and guideline of quality control for the EAF slag aggregate. Moreover, it must be constantly studied all kind of engineering performance and durability for related to this study.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.967-972
• /
• 2003

The inner-diameter 5 cm cold hollow cathode ion source was designed for the high current density and the homogeneous beam profile of ion beam. The ion source consisted of a cylindrical cathode, a generation part of magnetic field, a plasma chamber, convex type ion optic system with two grid electrode, and DC power supply system. The cold hollow cathode ion sources were classified into standard type (I), electron output electrode modified type (II). The operation of the ion source was done with discharge current, ion beam potential and argon gas flow rate. The modification of electron output electrode resulted in uniform plasma generation and uniform area of ion beam was extended from 5 cm to 20 cm. Improved ion source was evaluated with beam uniformity, ion current, team extraction efficiency, and ionization efficiency.