• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.107-112
• /
• 1974

In order to establish a rational application method of potash to paddy rice(Oryza sativa L. Jinheung, a Japonica variety) field and pot experiments on split application of two rates (6kg and 12kg $K_2O$ per 10a) of potash at a certain critical growing stage have conducted in 1973 and the results were as follows: 1. At the treatment where a rate of 6kg $K_2O$ per 10a(lower dose) of potash was supplied in two split doses, a half at transplanting time and the other half at young panicle formation stage, the yield of paddy rice appeatred to be low due to less number of panicles per hill. (Field experiment) 2. The treatment where potash supply ceased at transplanting time or at effective tillering stage but supplied at the other two stages (including panicle initiation stage) have failed to increase K content in the flag leaf and have shown low maturity and low thousand grain weight, which resulted in low paddy rice yield. (pot experiment) 3. From above two facts, it is concluded that the application of potash at transplanting time is an important practice for the high yielding of paddy rice. 4. The application of lime seemed to stimulate later growth of paddy depressing the unnecessary increase of poor miserable tillers in early stages of growth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.247-253
• /
• 2008

Winter annual green manure crops may be an effective tool for environmental-friendly agriculture system. The effect of legume (hairy vetch), non-legume (rye) and N fertilization ($190kg\;N\;ha^{-1}$) was examined and compared on red-pepper yield, nitrogen uptake, carbohydrate composition, and soil N and C contents. We monitored soil N and C for 120 days after incorporation (DAI) of green manures or mineral fertilizer. The mineralization of nitrogen reached the maximum around 30 DAI. The amount of inorganic nitrogen supplied by mineralization of hairy vetch residue was greater with than chemical N or rye. Photosynthetic rate was similar by 70 DAT in all treatments however, it in rye-incorporated red-pepper presented a sharp decline at later growth period. Leaf total nitrogen was greater with hairy vetch and chemical N than rye throughout the experiment. The soluble sugar increased steadily in all treatments from 40 to 110 days after transplanting (DAT) whereas starch showed a tendency of great decrease. Hairy vetch greatly promoted red-pepper growth by the later period however, chemical N showed the highest fruit yields.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.101-111
• /
• 2008

This paper introduces a high-speed Reed-Solomon(RS) decoder, which reduces the hardware complexity, and presents an RS decoder based FEC architecture which is used for 40Gb/s optical communication systems. We introduce new pipelined degree computationless modified Euclidean(pDCME) algorithm architecture, which has high throughput and low hardware complexity. The proposed 16 channel RS FEC architecture has two 8 channel RS FEC architectures, which has 8 syndrome computation block and shared single KES block. It can reduce the hardware complexity about 30% compared to the conventional 16 channel 3-parallel FEC architecture, which is 4 syndrome computation block and shared single KES block. The proposed RS FEC architecture has been designed and implemented with the $0.18-{\mu}m$ CMOS technology in a supply voltage of 1.8 V. The result show that total number of gate is 250K and it has a data processing rate of 5.1Gb/s at a clock frequency of 400MHz. The proposed area-efficient architecture can be readily applied to the next generation FEC devices for high-speed optical communications as well as wireless communications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.471-477
• /
• 2014

In this paper, we propose a low-cost license plate recognition system based on smart cam system using Android. The proposed system consists of a portable device and server. Potable device Hardware consists of ARM Cortex-A9 (S5PV210) processor control unit, a power supply device, wired and wireless communication, input/output unit. We develope Linux kernel and dedicated device driver for WiFi module and camera. The license plate recognition algorithm is consisted of setting candidate plates areas with canny edge detector, extracting license plate number with Labeling, recognizing with template matching, etc. The number that is recognized by the device is transmitted to the remote server via the user mobile phone, and the server re-transfer the vehicle information in the database to the portable device. To verify the utility of the proposed system, user photographs the license plate of any vehicle in the natural environment. Confirming the recognition result, the recognition rate was 95%. The proposed system was suitable for low cost portable license plate recognition device, it enabled the stability of the system when used long time by using the Android operating system.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.544-551
• /
• 2014

This paper suggests an algorithm to measure low-level radiation by radiation measuring devices, and the other algorithm to improve reaction speed of the device to better respond to dramatic changes in radiation amount. The former algorithm to improve the accuracy of measuring low-level radiation takes advantage of a dual window radiation measurement method which is based on accumulated average of pulses gathered by a radiation measuring sensor. The latter algorithm is to enhance reaction speed of a measuring device to more sensitively react to dramatic changes in radiation amount by adopting a dual window radiation measurement method which analyzes data patterns newly put into for six seconds. To verify the suggested algorithms, a hardware-which consists of sensor and high-voltage generator, controller, charger and power supply circuit, wireless communication part, and display part-was used. Tests conducted on the dual window radiation measurement method as used in the suggested algorithm have proved that accuracy improves to measure low-level radiation of 5uSv/h, and linearity also gets better. Other tests were conducted to see whether the suggested algorithm enhances the reaction speed of a radiation measuring device so that the device responds better to dramatically changing radiation amount. The experimental results have shown meaningful changes in numbers after six seconds. Therefore, the conclusions are made that the algorithm enhances the reaction speed of the device.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.510-519
• /
• 2012

Objectives: This study was conducted in order to evaluate the microbiological contamination of the indoor air of the lunchrooms at child care centers and investigate the toxin genes and toxin production ability of food-borne pathogens. Methods: A total of 64 child care centers were sampled to test total aerobic bacteria, coliform bacteria, fungi, Staphylococcus aureus, Bacillus cereus and Salmonella spp. according to the Korea Food Code. All toxin genes of pathogens were detected using the Polymerase Chain Reaction method. The Sthaph. aureus enterotoxin was detected by a Staphylococcus aureus enterotoxin-reversed passive latex agglutination kit. The heamolysin BL (HBL) and non-heamolytic enterotoxin (NHE) produced by B. cereus were detected using a B. cereus enterotoxin-reversed passive latex agglutination kit and Bacillus diarrheal enterotoxin visual immunoassay kit, respectively. Results: The means of total aerobic bacteria and coliform bacteria were $1.91{\pm}1.84$ log CFU/plate and $0.47{\pm}0.62$ log CFU/plate, respectively. The mean of fungi also showed $0.59{\pm}0.71$ log CFU/plate. Among the pathogenic bacteria tested in this study, Staphy. aureus and B. cereus were detected in four (6.3%) and 21 (32.8%) out of 64 indoor air samples from lunchrooms in child care centers, respectively. All Staphy. aureus tested in this study possessed no toxin genes and did not produce enterotoxin. The detection rate of nheABC, hblCDA, entFM and ces toxin gene in B. cereus was 100, 57.1, 76.2 and 0%, respectively. B. cereus isolates were classified into four groups according to the presence or absence of toxin genes. The nheABC gene was the major toxin gene among B. cereus tested in this study. The HBL was detected in 11 out of 21 B. cereus isolates (52.4%) and three B. cereus isolates produced NHE (14.3%). Conclusion: The results indicated that the contamination by microorganisms in the indoor air of lunchrooms was unqualified to supply safe catering in child care centers. The ongoing control of indoor air quality is required.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.704-710
• /
• 2005

The objective of this experiment was to compare corn and wheat in finishing pig diets in order to determine whether performance, carcass quality, fatty acid composition or fat colour is altered by choice of cereal grain. A total of 126 crossbred pigs were used in this experiment. At the start of the experiment, a portion of the experimental animals were assigned to receive a wheat-based diet formulated using soybean meal as the sole source of supplementary protein. The remainder of the pigs were assigned to a corn-based diet formulated to supply a similar level of lysine (0.65%) and energy (3,300 kcal/kg DE). At two week intervals, a portion of the pigs on the corn-based diet were switched to the wheat-based diet so that a gradient was produced with pigs being fed the corn and wheatbased diets for different proportions of the finishing period ranging from 100% on wheat to 100% on corn. There were no significant differences in the growth rate of pigs fed the two diets (p = 0.834). Pigs fed wheat tended to consume slightly less feed (p = 0.116) and had a significantly improved feed conversion (p = 0.048) compared with pigs fed corn. Choice of cereal did not affect dressing percentage (p = 0.691), carcass value index (p = 0.146), lean yield (p = 0.134), loin fat (p = 0.127) or loin lean (p = 0.217). Fatty acid composition of backfat was unaffected by the cereal grain fed (p>0.05). Total saturated fatty acid content was 33.31% for both corn and wheat fed pigs (p = 0.997) while the polyunsaturated fatty acid content was 12.01% for corn fed pigs and 11.21% for wheat fed pigs (p = 0.257). The polyunsaturated/saturated ratio was 0.36 for pigs fed corn and 0.34 for pigs fed wheat (p = 0.751). Hunter Lab Colour Scores indicated no difference either in the whiteness or yellowness of the fat. In conclusion, wheat can substitute for corn in growingfinishing pig rations without detrimental effects on pig performance. There were no differences in either the fatty acid composition of backfat or in backfat colour indicating that the decision to use wheat vs. corn needs to be made on economic grounds rather than being based on their effects on fat quality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.939-946
• /
• 2011

In thermal power generation companies, the recycling of refined ash (LOI < 6%) obtained from a PC-firing furnace is beneficial for the companies, e.g., it can be used for making lightweight aggregates. However, ash having a high LOI, which cannot be reused, is still buried in the ground. To obtain refined ash, the re-burning of high-LOI ash (LOI > 6%) in a PC-firing furnace can be an alternative. In this study, a numerical analysis was performed to demonstrate the effects of ash re-burning. An experimental constant value was decided by TGA (thermo-gravimetric analysis), and a DTF (drop-tube furnace) was used in the experiment for calculating the combustion of ash. On the basis of the trajectory of the moving particles of coal and ash, it was concluded that supplying ash near the burner, which is located high above the ground, is appropriate. On the basis of numerical results, it was concluded that an ash supply rate of 6 ton/h is suitable for combustion, without affecting the PC-firing boiler.