• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.129.1-129.1
• /
• 2010

Since the commencement of the fuel cell business in 2007, POSCO POWER has been the major supplier of the MCFC (Molten Carbonate Fuel Cell), which is the most commercialized stationary fuel cell system in the world. With its quite, yet active movement, more than 20MW MCFC systems have been installed and are operating in Korea. While trying to localize the components and set up a firm supply chain in Korea to provide more reliable and cost-competitive products to its customers, POSCO POWER is also devoting itself to developing new MCFC application products. One such product is a back-up power system, in which a back-up algorithm is embedded to the present system so that the product can work as a back-up generator in case of grid failure. The technology to enhance load following capability of a stack module is also being developed with the back-up algorithm. Another example is a building application, the goal being to make the present Sub-MW product suitable for urban area. For this, downsizing and modularization are the main R&D scope. The project for developing ship service fuel cell for APU application will launch soon as well. In the project, a system which can operate in marine environment, and reforming technology for liquid logistic fuel will be developed.

• 간호행정학회지
• /
• 제7권1호
• /
• pp.25-40
• /
• 2001

As the medical market has gradually changed from supplier-centered market to consumer-centered one, it makes hospital managers seek the consumer's satisfaction and the various marketing strategies for survival. Under the these changes, this study was accomplished to measure the consumer's satisfaction about the medial services which a general hospital provided, to identify the marketing strategies that a general hospital could establish for survival. For these purposes, a questionnaire was developed and distributed to 200 patients in general units and 100 patients in oriental units of a general hospital in Seoul. Among them, 163 reponses in general units and 71 reponses in oriental units were turned out to be useful. they were used for final analysis. The results of the survey were as follows : First, among all items of medical services which the hospital provided, patients were most satisfied by nursing services. Second, to Improve the hospital's medical service quality, it was very important for hospital staffs to be courtesy and to explain about a process of treatment or care sufficiently. Third, to decrease cost of medical service, it was very important to develop the various items and premiums of medical insurance especially in field of oriental medicine. Fourth, to make people come to the hospital easy, it was very important of fully utilize the public transportation such as subway. Fifth, to make hospital's image good, it was very important to develop well-prepared public relationship and to continuously provide the diverse medical service in the community.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.1-7
• /
• 2018

Objective signs are everywhere that the stationary energy storage market is growing up quickly. The use of distributed resources such as solar photovoltaics and electric vehicles are expanding at a rapid pace, creating technical challenges for the distribution system that will require energy storage and a new generation of software to address. This paper is intended for distribution utility managers and executives and makes the following points: ${\bullet}$ Utility-integrated (as opposed to merely grid-connected) energy storage projects represent a distinct, new wave of industry growth that is just getting underway and is required to manage distributed energy resources moving forward. ${\bullet}$ Utilities and the energy storage industry have important roles to lower risk in adopting this technology - thereby enabling this wave of growth. ${\circ}$ The industry must focus on engineering energy storage for adoption at scale - including the creation and support of software open standards -both to drive down costs and to limit technology and supplier risk for utilities. ${\circ}$ Utilities need to take a program-based, rather than a project- based, approach to this resource to best balance cost and risk as they procure and implement energy storage. By working together to drive down costs and manage risk, utilities and their suppliers can lay the energy storage foundation for a new, more digital distributed electricity system.

• 대한가정학회지
• /
• 제42권2호
• /
• pp.117-131
• /
• 2004

The purpose of this study was to examine the current situation of B2B fashion buying behavior (i.e., buying motives, product characteristics, buying processes), and to analyze the buying performance, buying problems and buying strategies. In depth, face-to-face interviews with structured questionnaire were conducted with three buyers and three vendors related to 18 buying items of C Company. Results of this research were as following:1. Buying motives were mainly reduction of buying costs, improvement of profits, and increased efficiency in buying process for retail buyers, while the selling motive was mainly improvement of market share for suppliers. Suitable items for B2B buying were basic items or bulk items. The B2B buying process included the following steps: selecting auction items, target prices, and suppliers ; setting the product specification and bidding niles; training the suppliers for preparing the auction; proceeding the auction by internet. 2. The perceived B2B benefits for buyers were profit improvement and cost reduction while those for suppliers were time saving and market share improvement. The indicated buying problems were as poor product quality, low product image, and difficulty in partnership. For B2B buying strategies, a quality management system, various auction tactics based on items, and a supplier management system were recommended.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• 한국주조공학회지
• /
• 제30권3호
• /
• pp.115-120
• /
• 2010

Recently, an advanced raw material supplying system in diecasting industry that molten metal produced by the raw material supplier can be directly delivered to the diecasting shops was proposed. It was known to have advantages of reducing melting process cost and improving working environment. However, for its successful mass production, the development of high insulation ladle is inevitable. In this study, the optimal mixing ratio of $SiO_2-Al_2O_3$ was investigated and the high insulation ladle with computer simulation result was built in a prototype and evaluated. The prototype which has refractory wall of $SiO_233%-Al_2O_3$ 35%-CaO 33% showed high insulation sufficient for carrying the Al molten metal for 138 minutes. Gas quantity result and SEM-EDS analysis on the melt poured in the ladle also showed extremely low level of 0.028 cc / 100 g and no penetration of Al molten metal into the refractory wall, satisfying the requirements for mass production.

• Industrial Engineering and Management Systems
• /
• 제14권1호
• /
• pp.1-10
• /
• 2015

In this paper, we consider multi-item inventory management. When managing a multi-item inventory, we coordinate replenishment orders of items supplied by the same supplier. The associated problem is called the joint replenishment problem (JRP). One often-used approach to the JRP is to apply a can-order policy. Under a can-order policy, some items are re-ordered when their inventory level drops to or below their re-order level, and any other item with an inventory level at or below its can-order level can be included in this order. In the present paper, we propose a method for finding the optimal parameter of a can-order policy, the can-order level, for each item in a lost-sales model. The main objectives in our model are minimizing the number of ordering, inventory, and shortage (i.e., lost-sales) respectively, compared with the conventional JRP, in which the objective is to minimize total cost. In order to solve this multi-objective optimization problem, we apply a genetic algorithm. In a numerical experiment using actual shipment data, we simulate the proposed model and compare the results with those of other methods.

• 경영과학
• /
• 제27권3호
• /
• pp.15-31
• /
• 2010

We consider a reverse logistics network design problem for recycling. The problem consists of three stages of transportation. In the first stage products are transported from retrieval centers to disassembly centers. In the second stage disassembled modules are transported from disassembly centers to processing centers. Finally, in the third stage modules are transported from either processing centers or a supplier to a manufacturer, a recycling site, or a disposal site. The objective is to design a network which minimizes the total transportation cost. We design a cooperative coevolutionary algorithm to solve the problem. First, the problem is decomposed into three subproblems each of which corresponds to a stage of transportation. For subproblems 1 and 2, a population of chromosomes is constructed. Each chromosome in the population is coded as a permutation of integers and an algorithm which decodes a chromosome is suggested. For subproblem 3, an heuristic algorithm is utilized. Then, a performance evaluation procedure is suggested which combines the chromosomes from each of two populations and the heuristic algorithm for subproblem 3. An experiment was carried out using test problems. The experiments showed that the cooperative coevolutionary algorithm generally tends to show better performances than the previous genetic algorithm as the problem size gets larger.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.363-367
• /
• 2014

One chambered sediment microbial fuel cell (SMFC) was equipped with Fe, brass (Cu/Zn), Fe/Zn, Cu, Cu/carbon cloth and graphite felt anode. Graphite felt was used as common cathode. The SMFC was membrane-less and mediator-less as well. Order of anodic performance on the basis of power density was Fe/Zn ($6.90Wm^{-2}$) > Fe ($6.03Wm^{-2}$) > Cu/carbon cloth ($2.13Wm^{-2}$) > Cu ($1.13Wm^{-2}$) > brass ($Cu/Zn=0.24Wm^{-2}$) > graphite felt ($0.10Wm^{-2}$). Fe/Zn composite anode have twisted 6.73% more power than Fe alone, Cu/carbon cloth boosted power production by 65%, and brass (Cu/Zn) produced 65% less power than Cu alone. Graphite felt have shown the lowest electricity generation because of its poor galvanic potential. The estuarine sediment served as supplier of oxidants or electron producing microbial flora, which evoked electrons via a complicated direct microbial electron transfer mechanism or making biofilm, respectively. Oxidation reduction was kept to be stationary over time except at the very initial period (mostly for sediment positioning) at anodes. Based on these findings, cost effective and efficient anodic material can be suggested for better SMFC configurations and stimulate towards practical value and application.

• KIEE International Transactions on Power Engineering
• /
• 제3A권1호
• /
• pp.53-60
• /
• 2003

At present the electric power industry in Korea is going through a major restructuring process. The restructuring is motivated by a desire to reduce electricity supply costs, to attract new in-vestment in modern generation, transmission and distribution facilities, and to stimulate innovation in the wholesale production and the retail supply of electricity. The experience to date shows that restructuring of electric power industry in the US, however, is marred with a number of problematic market performances including unreasonably high prices at wholesale. This paper investigates the important role of Power Exchange for stabilizing electric power industry in transition by offering various financial products. These financial products are used for risk hedging by the market participants. The paper focuses on the risk hedging by an individual supplier and derives an explicit decision rule that incorporates the attitude towards the risks. In addition to providing the financial products for risk hedging by market participants, the Power Exchange plays another very important role of financial safeguard system. Because of its unique characteristics, the Power Exchange is well suited for financial surveillance where it performs the early detection of unsound financial (and to a large extent operational) practices on the part of any system users and protect the system integrity and the market participants from the consequences of a default in the clearing structure.