• Title/Summary/Keyword: superstructures

Search Result 171, Processing Time 0.024 seconds

교량 상부구조물의 탄성받침 설치에 따른 충돌특성 분석 (Pounding Characteristics of a Bridge Superstructure on Rubber Bearings)

  • 최형석;김정우;공영이;정진환;김인태
    • 한국지진공학회논문집
    • /
    • 제15권4호
    • /
    • pp.13-21
    • /
    • 2011
  • 지진하중으로 인해 교량상부구조 간에 발생하는 충돌은 교량상부구조의 낙교, 교각의 파괴와 같은 국부적인 손상뿐만 아니라 교량전체시스템의 붕괴를 유발할 수 있다. 이와 같은 충돌의 영향은 신축이음부의 재질, 형태 및 교대부의 여유간격과 관계가 있는 것으로 알려져 있다. 본 논문에서는 교량상부구조 간에 발생하는 충돌에 대한 특성을 분석하기 위해 충돌해석 이론 중 가장 널리 활용되고 있는 접합요소 접근법(Linear Spring Model, Kelvin-Voigt Model, Hertz Model)에 대해서 고찰 하고 이를 실험적으로 검증하기 위해 탄성받침이 설치된 교량상부구조를 모형화한 콘크리트 교량모델에 대한 진동대 실험을 실시하였다. 기존의 충돌모델을 적용한 이론 해는 실험결과와 잘 부합되지 못하였으며, 이에 본 논문에서는 충돌강성에 적절한 적용계수 �� 를 이용하여 충돌 후 거동을 잘 모사할 수 있는 충돌강성 수준을 산출하였다. 충돌발생시 적절한 강성 및 재료의 동적특성, 충돌면의 형상 등에 따라 발생하는 충돌력의 크기가 달라지므로 이에 대한 추가적인 연구가 필요한 것으로 판단된다.

일체식 교대 교량의 대횡변위를 위한 교대와 H형 말뚝 연결부의 개발 (Development of Abutment-H pile Connection for Large Lateral Displacements of Integral Abutment Bridges)

  • 김우석;이재하;박대효
    • 한국전산구조공학회논문집
    • /
    • 제26권4호
    • /
    • pp.309-318
    • /
    • 2013
  • 본 논문에서는 일체식 교대 교량의 장대화 및 내진성능 향상을 위해 가장 중요한 역할을 하는 교대-H형 강말뚝 연결부의 성능을 향상시키기 위하여 기존의 연결부의 균열형상을 파악하고, 이를 기반으로 새로운 형태의 연결부를 제안하기 위하여 철근을 활용하여 강성을 증가시키는 방법과 강말뚝의 형상을 개선하여 연성을 개선시키는 방법을 모색하였다. 먼저, 기존 연결부의 성능을 향상시키기 위하여 연결부 주변에 PennDOT에 규정된 철근상세와 나선철근의 배치와 HSS 튜브를 사용하였으나, PennDOT의 철근 상세와 HSS 튜브는 연결부의 성능을 향상시키지 못 했으나, 나선철근은 균열을 효과적으로 차단시키는 것을 확인할 수 있었다. 하지만, 철근의 구속효과로 인해 강말뚝의 저항력이 변위에 선형적으로 비례하여 증가하므로 교량의 상부구조에 축력을 발생시키는 효과를 가져왔다. 따라서, 강말뚝의 형상을 개선하기 위하여 콘크리트 교대에 매입된 부분의 플랜지를 제거하는 방법과 콘크리트 외부에서 플랜지의 폭을 축소시키는 형태를 검토하였다. 두 가지 방안 모두 균열을 억제하는데 효과적인 방법이었으나, 플랜지를 제거하는 쪽의 연결부가 더욱 효과적이었다.

반강접 접합부를 적용한 초대형 부유식 구조물 상부구조체의 2차 탄성해석 (Second Order Elastic Analysis of Superstructures on Very Large Floating Structure with Semi-Rigid Connections)

  • 송화철;이은숙
    • 한국항해항만학회지
    • /
    • 제27권1호
    • /
    • pp.63-70
    • /
    • 2003
  • 초대형 부유식 구조무? 상부구조는 육상 구조물과는 달리 파량하중의 영향을 받기 때문에 하부부체의 변형에 의해서 상부구조물에는 부가 모멘트가 크게 발생한다. 이와 같은 부가모멘트의 저감을 위하여 보-기둥 접합부에 반강접의 도입에 관한 연구는 시작단계이며 반강접의 비선형 거동을 고려한 상부구조물의 연구는 초기단계이다. 본 논문에서는 초대형 부유식 구조물의 상부구조물에 정적하중과 진폭의 크기가 다른 파랑하중이 동시에 작용할 경우 강접 골조와 부분적으로 반강접 접합부가 사용된 세 가지 접합부 종류에 대한 2차 탄성해석을 수행하였다. 접합부는 웨브에 더블 앵글을 가진 상하 앵글(TSD) 접합과 확장 엔드 플레이트 접합 그리고 각형강관 외다이아프램 접합부를 적용하였으며 중고층 구조물에 파랑하중이 작용할 경우 반강접 접합부의 위치에 따른 모멘트와 수평변위의 응답특성에 대하여 연구하였다.

Outcomes of dental implant treatment in patients with generalized aggressive periodontitis: a systematic review

  • Kim, Kyoung-Kyu;Sung, Hun-Mo
    • The Journal of Advanced Prosthodontics
    • /
    • 제4권4호
    • /
    • pp.210-217
    • /
    • 2012
  • PURPOSE. The purpose of this study was to analyze the current literatures and to assess outcomes of implant treatment in patients with generalized aggressive periodontitis. MATERIALS AND METHODS. Studies considered for inclusion were searched in Pub-Med. The literature search for studies published in English between 2000 and 2012 was performed. Our findings included literature assessing implant treatment in patients with a history of generalized aggressive periodontitis (GAP). All studies were screened according to inclusion criteria. The outcome measures were survival rate of superstructures, marginal bone loss around implant and survival rate of implants. All studies were divided into two follow-up period: short term study (< 5 years) and long term study (${\geq}5$ years). RESULTS. Seven prospective studies were selected, including four short-term and three long-term studies. The survival rates of the superstructures were generally high in patients with GAP, i.e. 95.9-100%. Marginal bone loss around implant in patients with GAP as compared with implants in patients with chronic periodontitis or periodontally healthy patients was not significantly greater in short term studies but was significantly greater in long term studies. In short term studies, the survival rates of implants were between 97.4% and 100% in patients with GAP-associated tooth loss, except one study. The survival rates of implants were between 83.3% and 96% in patients with GAP in long term studies. CONCLUSION. Implant treatment in patients with GAP is not contraindicated provided that adequate infection control and an individualized maintenance program are assured.

지진 시 사질토 지반에 근입된 무리말뚝의 말뚝 캡 크기가 무리말뚝 효과에 미치는 영향 (A Group Pile Effect on Changing Size of Pile Cap in Group Pile under Sand Soil in Earthquake)

  • 이현근;안광국;강홍식
    • 한국지반환경공학회 논문집
    • /
    • 제20권10호
    • /
    • pp.39-46
    • /
    • 2019
  • 상부구조물을 지지하는 무리말뚝의 내진설계 시 지반-구조물의 상호작용이 고려되어야 한다. 무리말뚝 설계 시 지반과 구조물의 비선형 관계는 p-y 곡선이 많이 사용되고 있으며 지진과 같은 동적하중조건에서 지반-구조물의 상호작용이 고려된 동적 p-y 곡선을 무리말뚝의 내진설계에 사용하기 위한 연구가 진행되고 있다. 그러나 이와 같은 연구는 말뚝 캡에 의한 지지효과 및 상부구조물의 관성거동에 의한 상호작용은 고려되지 않았다. 이에 본 연구에서는 사질토 지반에 근입된 상부구조물을 지지하는 무리말뚝에서 말뚝 캡의 변화가 무리말뚝에 미치는 영향을 확인하기 위해 말뚝의 배열 및 중심 간격은 고정하고 말뚝 캡 측면과 말뚝 중심 간격을 변화시켜 진동대 모형실험을 수행하였다. 그 결과 무리말뚝에서 말뚝 캡 측면과 말뚝 중심 간격의 변화가 말뚝의 동적 p-y 곡선 및 무리말뚝 효과에 영향을 미치는 것으로 나타났다.

Dynamic analysis of semi-rigidly connected and partially embedded piles via the method of reverberation-ray matrix

  • Yan, Wei;Chen, W.Q.
    • Structural Engineering and Mechanics
    • /
    • 제42권2호
    • /
    • pp.269-289
    • /
    • 2012
  • Free vibration and dynamic responses of piles semi-rigidly connected with the superstructures are investigated. Timoshenko beam theory is employed to characterize the pile partially embedded in a two-parameter elastic foundation. The formulations for the method of reverberation-ray matrix (MRRM) are then derived to investigate the dynamics of the pile with surface cracks, which are modeled as massless rotational springs. Comparison with existent numerical and experimental results indicates the proposed method is very effective and accurate for dynamic analysis, especially in the high frequency range. Finally, the effects of some physical parameters on the natural frequencies, frequency responses and transient responses of the piles are studied.

도로교의 중차량 통과허용하중 설정에 관한 연구 (A Study on Permit Vehicle Weight for Highway Bridges)

  • 김상효;양남석;김종학;전귀현
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 봄 학술발표회논문집
    • /
    • pp.222-229
    • /
    • 2000
  • Malty bridges are severely damaged by the overloaded heavy vehicle and tile trend will become more serious because the traffic volume is continuously increasing. Currently, the vehicles with gross weights over 40 tons or axle weight over 10 tons are not allowed on the public road. However, this regulation is not based on a systemetic study on the bridge capacityand assumed to be much too conservative depending on the vehicle types ans bridge types. In this study, the permit weights of heavy vehicles of diverse axle spacings and axle load distribution are calculated considering the structural characteristics of bridge superstructures. In order to consider the various load effects of heavy weight vehicle crossings, three conditions are considered in the calculation of permit vehicle load. From the results, the permit vehicle weights of bridges are calculated and simplified formulas which can be used in the case when only the vehicle dimension are known are presented.

  • PDF

탄성받침을 사용한 도로교의 충격하중특성 분석 (Vehicular Impact Loading on with Laminated Rubber Bearing)

  • 김상효;허진영;신용준;이용선
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 봄 학술발표회논문집
    • /
    • pp.230-237
    • /
    • 2000
  • The purpose of this study is to evaluate the dynamic behavior of highway bridge due to moving vehicle load, considering the effect of laminated rubber bearing. Dynamic behaviors of bridge considering the effect of bearings are studied with 3-dimensional bridge and vehicle models. To analyze the effect of bearings on the dynamic behaviors of superstructures of bridges, laminated rubber bearing is modeled as 3-dimensional frame element with equivalent stiffness and damping, and the models are included in the bridge analysis model. The results from the analytical models with laminated rubber bearing show a significant effects on dynamic responses and more complex vibration characteristics compared with the results from the bridge with pot bearings. Generally, larger dynamic amplification factors are obtained in the case of laminated rubber bearing, which is mainly due to the smaller torsional stiffness of the bridge with laminated rubber bearing. It can be recommended that were careful consideration on the vibration of bridges and dynamic load allowance in design are needed when adopting laminated rubber bearing.

  • PDF

PSC Beam의 박스형 보강 시 이차합성을 고려한 신뢰성해석 (A Reliability Analysis considering the Second Composite Effect in the To-Box Reinforcement of Deteriorated PSC Beam Bridge)

  • 한성호;조창주;방명석;신재철
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.400-407
    • /
    • 2005
  • The reinforcing effect of modified structure of PSC beams is analyzed in this study. The PSC beams are closed by precast half panels embeding PS tendons at the bottom flange of I-bear The stiffness of box structure is larger and the PS force at half panels makes a time-dependent upward camber of superstructures. The superstructure becomes a second composite structure among 3 elements-PSC ben RC slab, PSC Panel. The time-dependent creep and shrinkage effect at PSC Panels and structural behavior is verified considering construction sequences. The optimal range of to-box reinforcing method is surveyed through reliability analysis.

  • PDF

모의 지진하중에 의한 교량의 사가에 따른 축방향변위에 대한 확률론적 해석 (Probabilistic Analysis for Longitudinal Displacement due to Skew Angle of Bridges under Scenario Earthquakes)

  • 전환석;이대형;정영수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.553-558
    • /
    • 1998
  • Since the mid of the 20th century in the world, it has been observed that the number of minor or moderate earthquake motions tend to be increased year by year. Owing to the topographical condition, moreover, large numbers of skew bridges have been constructed for the requirements of more than DB18 ton bridge in Korea. It has been also observed from foreign countries that lots of superstructures collapse in bridge were occurred in previous earthquakes, inclusive of 1995 Kobe earthquake. This is caused by a relative displacement between the upper and lower structure of bridge by the earthquake and the rotation with respect to the vertical axis of skew bridges, which were subjected to and earthquake motion. In this study, the probabilistic analysis of unseating failure of skew bridges under scenario earthquake has been carried out by evaluating the longitudinal displacement of skew bridges.

  • PDF