• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.52-60
• /
• 2016

Recently nickel based superalloys are extensively being regarded as the materials for the steam turbine parts for hyper super critical (HSC) power plants working at the temperature over $700^{\circ}C$, since the materials have excellent strength and corrosion resistance in high temperature. In this paper, alloy 617 of solution strengthened material and alloy 263 of ${\gamma}^{\prime}$-precipitation strengthened material were prepared as the testing materials for HSC plants each other. Post weld heat treatment (PWHT) was conducted with the gas tungsten arc (GTA) welded specimens. The microstructure of the base metals and weld metals were investigated with Electron Probe Micro-Analysis (EPMA) and Scanning Transmission Electron Microscope (STEM). The experimental results revealed that Ti-Mo carbides were formed in both of the base metals and segregation of Co and Mo in both of the weld metals before PWHT and PWHT leaded to precipitation of various carbides such as Mo carbides in the specimens. Furthermore, fine ${\gamma}^{\prime}$ particles, that were not precipitated in the specimens before PWHT, were observed in base metal as well as in the weld metal of alloy 263 after PWHT.

• 교육녹색환경연구
• /
• 제17권1호
• /
• pp.1-11
• /
• 2018

본 연구의 목적은 노후학교를 대상으로 국가수준에서 추진했던 그린스쿨 사업의 추진배경, 추진현황 및 특징과 그린스쿨 학교의 실태를 조사, 분석하여 향후 우리나라 그린스쿨이 에너지 및 온실가스 감축 측면에서 보다 효율적이며, 학교에 적합한 방식으로 활성화될 수 있는 방안을 모색하는데 있다. 이를 위해 우선 국내외 문헌분석을 통해 해외 유사정책에서의 그린스쿨의 개념과 정책 추진배경 및 주요내용의 유사점과 차이점을 분석하였으며, 국내 그린스쿨 학교와 우리나라 그린스쿨 사업의 벤치마킹 대상이었던 일본 에코스쿨 및 수퍼 에코스쿨 학교의 실태를 조사하여 국내 그린스쿨의 문제점 및 성과를 진단하였다. 이를 토대로 국내 그린스쿨 사업의 문제점을 정책적 측면, 운영적(유지관리, 활용) 측면에서 진단하고, 향후 학교시설의 에너지 효율화 및 친환경화를 위한 정책이 보다 활성화 될 수 있는 방안을 제시하였다.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.331-336
• /
• 2017

Bacteria exist everywhere and continuously come into contact with daily surroundings and humans. Super bacterium methicillin-resistant Staphylococcus aureus, resistant to methicillin, has recently appeared. The morbidity and rate of death associated with super bacteria infection has increased. This study investigated the antibacterial activity of fabrics naturally dyed with Chamaecyparis obtusa leaves extract against methicillin-resistant Staphylococcus aureus. Fabrics were left for 15 min in a natural dyeing solution prepared by extraction from C. obtusa leaves using 11.3% (o.w.f) with a fixed liquor ratio of 1:22 at $40^{\circ}C$. The dyeing process was conducted using three different mordants; subsequently, the K/S value of the dyed fabrics increased in the order of None < Cu < Fe < Al. The color fastness property of the fabrics to washing, dry-cleaning, and rubbing was found to be excellent and ranked in the 4-5 grade. The color fastness to light of natural dyeing is low in most cases and has the problem that the dye color soon becomes bleached. Yet, in most cases cloth dyed with retinispora leaves, the color fastnezz to light was good with a third to fourth grade. Non-mordant fabrics, aluminum mordants, and copper mordants also showed better antibacterial properties (99.9% reduction) against methicillin-resistant Staphylococcus aureus, compared to the control fabrics. The dyed fabrics showed the same antibacterial activity even after three washes. The results highlight the strong potential of fabrics naturally dyed with C. obtusa-extract as a medicinal material with excellent antibacterial function against methicillin-resistant Staphylococcus aureus.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.126-132
• /
• 2011

Recently, high-rise apartment is being briskly built but there are problems such as lack of ventilation, stack effect and much energy consumption. Therefore It is recommended to develop a Small Wind Power System Combined Ventilator as a solution to solve these problems. The purpose of this study is to provide basis for Small Wind Power System Combined Ventilator in super high-rise apartment. This study conducted CFD simulation (Star-CCM) according to the shape of structures, building height and distance of two structures to identify the effect of wind speed increase when the structure is installed. As a result, pyramidal type was best suited for increase of wind speed. The best place was the front of the roof to main wind direction, and the best building height was 200m rather than 300m. If two or more small wind turbines combined ventilator are installed closely, vertical position to main wind direction is recommended. Horizontal position must necessarily be avoided, but height difference between two blades more than 3m showed good performance.

• Wind and Structures
• /
• 제18권6호
• /
• pp.693-715
• /
• 2014

Stochastic processes are used to represent phenomena in many diverse fields. Numerical simulation method is widely applied for the solution to stochastic problems of complex structures when alternative analytical methods are not applicable. In some practical applications the stochastic processes show non-Gaussian properties. When the stochastic processes deviate significantly from Gaussian, techniques for their accurate simulation must be available. The various existing simulation methods of non-Gaussian stochastic processes generally can only simulate super-Gaussian stochastic processes with the high-peak characteristics. And these methodologies are usually complicated and time consuming, not sufficiently intuitive. By revealing the inherent coupling effect of the phase and amplitude part of discrete Fourier representation of random time series on the non-Gaussian features (such as skewness and kurtosis) through theoretical analysis and simulation experiments, this paper presents a novel approach for the simulation of non-Gaussian stochastic processes with the prescribed amplitude probability density function (PDF) and power spectral density (PSD) by amplitude modulation and phase reconstruction. As compared to previous spectral representation method using phase modulation to obtain a non-Gaussian amplitude distribution, this non-Gaussian phase reconstruction strategy is more straightforward and efficient, capable of simulating both super-Gaussian and sub-Gaussian stochastic processes. Another attractive feature of the method is that the whole process can be implemented efficiently using the Fast Fourier Transform. Cases studies demonstrate the efficiency and accuracy of the proposed algorithm.

• 한국수산과학회지
• /
• 제1권2호
• /
• pp.73-79
• /
• 1968

Silica Gel, Hyflo super-Cel, 및 Micro-Cel C 박층을 이용한 xanthophyll 분리를 위한 chromatography의 실험결과를 요약하면 1) 색소분리능력은 Micro-Cel C 박층이 가장 좋고 Silica Gel 박층에서도 만족할만한 하였다. 그러나 Silica Gel 박층은 자체의 산성때문에 조작중 epoxy xanthophyll의 furanoid 이성화를 초래하였다. 2) $CaSO_4$ 등의 binder는 접착보조효과 보다는 오히려 분리능력을 방해하였다. 3) 전개조건은 차광하의 불포화용기내에서 $15\~20$분간의 전개에 $13\%$ acetone-petroleum ether 용매를 쓰는 것이 적당하였다. 4) Band의 형상 및 trailing을 정상화하는데는 양편 가장자리의 박층을 $0.2\~0.3cm$ 폭으로 제거하는 것이 효과적 이였다. 5) 박층의 두께는 10g의 Micro-Cel C 분말을 75ml의 증유수에 현탁시켜 그중 3ml 취하여 한개의 $2\times20cm$ glass slide에 도포한것이 적당하였다. 7) 이상의 결과에서 Micro-Cel C thin-layer는 미량의 시료로서 단시간내에 빠른 조작으로 artifact 생성없이 xanthophyll을 분리 할 수 있고 band는 손쉽게 긁어내어 흡광도법에 의해 정량적인 목적에도 이용할 수 있었다.

• 한국의류학회지
• /
• 제9권2호
• /
• pp.75-84
• /
• 1985

In order to improve dyeing and finishing technology of thin cloth of microfiber(super-fine fiber), the degrees of deep dyeing method, the light fastness, and the washing fastness were investiagted. 1. The thin cloth made of microfiber, $0.15^d\~0.2^d$, was conjugated type and the dyeing degree was lower at 5 to $10\%$ than that of cloth made of common fiber. The cloth of excellent dyeing fastness, light fastness, was developed by increasing the concentration of dye of high quality up to $5\~10\%$. 2. Because refractory rate of microfiber of $0.2^d$ was lower than that of $0.01^d$, the surface refractory rate of $0.2^d$ was lower than that of $0.01^d$ fiber. Therefore the surface of micro-fiber, $0.2^d$, was more rougher than that of $0.01^d$ and it belongs to separate type. 3. The higher degree of dyeing was increased by using dye of microparticle. Also the degree of textile printing was increased by adding urea solution ($20\%$) and glycerine diethylene glycol. 4. Light fastness was very excellent, marked 5 grade. However, washing fastness was 2$\~$3 grade. After dyeing, we could improve to 4 grade, through hot water washing including some organic chlorine solvent. 5. Super microfiber of $0.01^d$ will not be dyed by present dye and dyeing equipment, because right reflection light rate(white light) of fiber surface was too high and the more refraction rate higher the more surface refraction rate will be increased.

• Smart Structures and Systems
• /
• 제6권8호
• /
• pp.939-951
• /
• 2010

A low-cost wireless sensor network (WSN) solution with highly expandable super and simple nodes was developed. The super node was designed as a sensing unit as well as a receiving terminal with low energy consumption. The simple node was designed to serve as a cheaper alternative for large-scale deployment. A 12-bit ADC inputs and DAC outputs were reserved for sensor boards to ease the sensing integration. Vibration and thermal field tests of the Chi-Lu Bridge were conducted to evaluate the WSN's performance. Integral acceleration, temperature and tilt sensing modules were constructed to simplify the task of long-term environmental monitoring on this bridge, while a star topology was used to avoid collisions and reduce power consumption. We showed that, given sufficient power and additional power amplifier, the WSN can successfully be active for more than 7 days and satisfy the half bridge 120-meter transmission requirement. The time and frequency responses of cables shocked by external force and temperature variations around cables in one day were recorded and analyzed. Finally, guidelines on power characterization of the WSN platform and selection of acceleration sensors for structural health monitoring applications were given.

• 안보군사학연구
• /
• 통권4호
• /
• pp.241-287
• /
• 2006

16th CPC National Party Congress established multi-polarization strategy as an external strategy, and 'The Great Reinvigoration of Chinese Nation' as the aim of The Great Strategy of China. It is required to maintain stabilized and peaceful surrounding circumstance in order to make it possible. The ideal surrounding circumstance that China is aiming for is to achieve multi-polarization of international society while maintaining strategic deterrence. Multi-polarization now in 'One super Multi powers' is that 'Multi powers' deter 'One super' to prevent predominance of USA and to decentralize the power. China wishes to realign international order as it accomplishes multi-polarization. China who wants 'Peace and Stabilization' emphasizes autonomy, peace and unification of Korean peninsula. Autonomy means the restraint intervention of foreign power, that is, American influence in Korean peninsula. Multi-polarization strategy of China will be used in Korean peninsula to solve nuclear issue of North Korea, to support neutral unification and to keep balance of power with USA, Japan and Russia as it renders economic advantages to South Korea and security engagement to North Korea, based on special geographical, cultural and historical relationship with two Koreas. The nuclear issue of North Korea will be a stage to test multi-polarization of China. When it deduces positive solution of nuclear issue due to successful six-party talks, and advances to security talks of Northeast Asia, it will contribute a lot to power and elevation of national stature of China in international society. Thus, the Chinese strategy will be an accommodative condition for the security of South Korea, and it requires wise decision of South Korea to make hay while the sun shine.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.403-409
• /
• 2015

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructure and diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and the diffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific lattice relationship. The modulated structure may be induced by short distance slip or atom movement during a very short interval of solution treated and quenched (STQ) materials. The athermal ${\omega}$ phase, which could be precipitated at low temperature aging, is also analysed by the metastable phase. The metastable phases including athermal ${\omega}$ phase had a common characteristic of hardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atom movement at the metastable state.