• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.89-96
• /
• 2009

In recent years, there has been a considerable interest in the application of super plastic forming in the aircraft and automotive industries. This requires a detailed design of the technological process in order to exploit its peculiar potentialities better. Nowadays, the finite element method is used to plan the sheet metal forming processes whose simulation requires determination of material constants for super plastic materials. The present work is aimed to show a simple method to characterize super plastic materials duplex stainless steel which was formed by a constant gaspressure to hemispheres with and without back pressure. The forming operation was performed using an in-house designed and built biaxial forming apparatus. The temporal change of dome heights of hemispheres were measured for applying the pressures. The flow stresses and strain rates developed at the top of the dome during the forming step were shown to follow closely the flow stress - strain rate relationship obtained from the strain rate change tests performed at the same temperature.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.103-110
• /
• 2020

Super engineering plastic(SEP) are applied to high performance and high value industries due to their excellent mechanical properties and high continuous operating temperature. Among them, PES and PEI are amorphous SEPs, and have the advantages of high flexibility, mechanical properties, transparency, and thermal stability. In this study, polyethersulfone(PES) and polyetherimide(PEI) fibers were manufactured to produce flame retardant artificial hair. PES and PEI fibers prepared through a melt-spinning process at a high temperature of 360 to 420℃. They are compared with commercial artificial hair by thermal gravimetric analysis(TGA), linear density, tenacity, and limited oxygen index(LOI) analysis. PES and PEI fibers have similar linear density and tenacity to commercial artificial hair, while their thermal stability and flame retardant are excellent. In particular, flame retardant was analyzed through LOI value and PES was 35.1%, which is superior to commercial artificial hair PET/Br(28.2%) and PET/P(20.2%). Therefore, PES and PEI are suitable as artificial hair for flame retardant.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.7-17
• /
• 2017

In Chinese Design Codes, for super high-rise buildings with complex structural distribution, which are regarded as code-exceeding buildings, elasto-plastic time history analysis is needed to validate the requirement of "no collapse under rare earthquake". In this paper, a 117-story super high-rise building is discussed. It has a height of 597 m and a height-width ratio of 9.5, which have both exceeded the limitations stipulated by the Chinese Design Codes. Mega columns adopted in this structure have cross section area of about $45m^2$ at the bottom, which is infrequent in practical projects. NosaCAD and Perform-3D, both widely used in nonlinear analyses, were chosen in this study, with which two model were established and analyzed, respectively. Elasto-plastic time history analysis was conducted to look into its seismic behavior, emphasizing on the stress state and deformation abilities under intensive seismic excitation.From the comparisons on the results under rare earthquake obtained from NosaCAD and Perform-3D, the overall responses such as roof displacement, inter story drift, base shear and damage pattern of the whole structure from each software show agreement to an extent. Besides, the deformation of the structure is below the limitation of the Chinese Codes, the time sequence and distribution of damages on core tubes are reasonable, and can dissipate certain inputted energy, which indicates that the structure can meet the requirement of "no collapse under rare earthquake".

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2303-2311
• /
• 2005

Super low temperature has many applications nowadays, from the chemical processing, automotives manufacturing, plastic recycling, etc. Considering of its wide application in the present and the future, study of the super-low temperature refrigeration system should be actively carried out. Super low state temperature can be achieved by using multi-stage refrigeration system. This paper present the development and testing of cascade refrigerator system for achieving super-low temperature. On this experiment, two different types of HCFCs refrigerants are utilized, R-22 and R-23 were applied for the high stage and the low-pressure stage respectively. The lowest temperature in the low-pressure evaporator that can be achieved by this cascade refrigeration system is down to $-85^{\circ}C$. This experiment is aimed to study the effect of inlet pressure of the low-pressure stage evaporator and low-pressure stage compressors inlet pressure characteristics to the overall temperature characteristics of cascade refrigeration system.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.416-424
• /
• 2019

우리나라에서 지하층 누름콘크리트는 주로 무근 콘크리트를 사용하고 있다. 이러한 시스템에서는 건조수축이나 불규칙한 온도 분포로 인하여 바닥콘크리트의 균열이 빈번히 발생되고 있다. 이러한 문제점을 해결하고자 과거에는 메탈라스, 섬유 등을 사용하였지만 균열을 제어하기에는 효과가 미비한 점이 있었다. 이에, 본 연구에서는 여러 가지 혼화 재료를 혼입한 지하층 누름콘크리트의 균열 저감 효과에 관하여 분석하였다. 혼화재료의 종류에 따른 균열저감 효과를 알아보기 위해 공기량 실험, 슬럼프 실험, 압축강도 실험, 소성수축 실험을 실시하였다. 공기량 실험결과, 혼화재료들을 혼입한 시편들은 Plain과 유사한 공기량(4.5±1.5%)을 나타내었으며, 슬럼프 실험에서는 고성능 감수제를 혼입한 시편들이 Plain에 비하여 가장 높게 나타내었지만, 폴리머를 혼입한 경우 Plain과 유사하게 나타났다. 압축강도 실험에서는 실리카 흄, 고성능 감수제 및 SBR을 혼입한 시편들이 Plain에 비하여 10-15% 높게 나타났다. 소성수축 실험결과 MC, 고성능 감수제, SBR를 혼입한 시편들이 Plain에 비하여 균열발생이 적었으며, 특히 MC섬유를 혼입한 시편은 균열이 발생하지 않았다.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.325-340
• /
• 1995

The iterative procedure to use the nonconforming elements in elasto-plastic problems is established and applied to the variable node transition solid element developed for the automated three-dimensional local mesh refinement. Through numerical tests, the validity and performance of the element are examined. As the nonlinear iterative procedure presented in this paper is accomplished for the general three-dimensional case, it can also be easily applied to the two-dimensional elements such as membranes, plates and shells.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2012

In this study, silicone injection molding technology with curved thermoplastic insert was developed to produce super-hydrophobic surface. Thermoplastic insert part and injection mold design of base plastic cover were performed to produce cost effective hydrophobic surface part. An optimization process of part thickness for thermoplastic insert part was performed with transient thermal analysis under silicone over-molding process condition. Structural thermal analysis of silicone injection mold was also performed to obtain uniform temperature condition on the surface of micro-patterned mold core. Super-hydrophobic surface for the silicone injection molded part with thermoplastic insert could be verified from the measurement of contact angle. It was shown that the averaged contact angle was over $140^{\circ}$.

• 대한의용생체공학회:의공학회지
• /
• 제21권3호
• /
• pp.233-237
• /
• 2000

현재 의료용으로 사용되고 있는 광섬유를 이용한 내시경은 굴절률이 다른 두 가지 유리로써(Step Index SI) 제작되고 있다. 이와 같은 내시경은 취급에 주의하여야 하는 근본적인 재료상의 문제점 외에도 영상 가이드의 최고 분해능이 5$\mu$m으로 제약되고 있는 실정이다. 본 연구에서는 플라스틱을 이용하여 고 영상 분해능($7\mu\;m\~2.5\mu$m)을 가진 미세 내시경(Ultrathin Endoscope)용 영상 가이드의 분해능을 측정하였다. 그 각각의 플라스틱 광섬유 굴절률은 광섬유 중심으로부터 외곽까지 점차 감소하는 특성 (Graded Index GRIN)을 가지고 있다. 플라스틱 GRIN 영상가이드의 분해능 측정 결과. 마이크로 광섬유의 지름이 작아질수록 그 분해능이 증가되었고, 유리를 이용한 SI 영상 가이드 분해능과의 비교 연구 결과, 2배의 분해능을 가진 (2.5$\mu$m) 플라스틱 GRIN 영상가이드 제작이 가능함을 보였다. 이와 같은 플라스틱 GRIN 광섬유 다발은 의료 분야뿐 아니라 국방 및 산업분야의 새로운 광학적 설계에 많은 영향을 줄 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.97-104
• /
• 2018

The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.