• Journal of Ocean Engineering and Technology
• /
• v.18 no.5
• /
• pp.43-49
• /
• 2004

The lightness of components required in the automobile and machine industry necessitates the use of high strength components. In particular, the fatigue failure phenomena, which occurs when using metal, increases the danger to human life and property. Therefore, antifatigue failure technology is an integral part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel, while improving the fatigue strength on surface. Therefore, in this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in a stress ratio(R=0.1, R=0.3, R=0.6) was investigated, giving consideration to fracture mechanics. By using the methods mentioned above, following conclusions are drawn: (1) The fatigue crack growth rate(da/dN) of the shot-peening material was lower than that of the un-peening material and in stage I, ΔKth, the threshold stress intensity factor of the shot-peen processed material is high in critical parts, unlike the un-peening material. Also m, fatigue crack growth exponent and number of cycle of the shot-peening material, was higher than that of the un-peening material, as concluded from effect of da/dN. (2) Fatigue life shows more improvement in the shot-peening material than in the un-peening material, and the compressive residual stress of surface on the shot-peen processed operate resistance of fatigue crack propagation.

• Journal of Periodontal and Implant Science
• /
• v.23 no.2
• /
• pp.331-344
• /
• 1993

The purpose of this study was to investigate the change of tooth mobility and bite force according to periodontal disease severity. Tooth mobility and biting force due to change of viscoelastic property of periodontium were influenced by inflammation of periodontal tissue. 30 patients participated in this study, the periodontal disease severity is evaluated with SBI and attachment loss. SBI and attachment loss were examined by periodontal probe. Tooth mobility was tested two times to each tooth using periotest (Siemens Co, Germany) and bite force was evaluated with MPM-3000 (Nihon Kohden Co, Japan). Statistical analysis was applied to correlation ($r^2$) and regression analysis. The obtained results were as follows : 1. As the attachment loss increased, tooth mobility increased with significance, and they had highly positive correlation ($r^2=0.68$) on entire dentition. 2. As the SBI increased, tooth mobility increased with significance, and they had positive correlation ($r^2=0.37$) on entire dentition. 3. As the attachment loss increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.42$) on maxillary anterior dentition but low negative correlation ($r^2=0.20$) on the other portion of dentition. 4. As the SBI increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.31$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition. 5. As tooth mobility increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.32$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition.

• Preventive Nutrition and Food Science
• /
• v.11 no.2
• /
• pp.140-145
• /
• 2006

Seventy eight bacterial strains were isolated from several jeotgals using MRS and M 17 agar media. The probiotic properties such as tolerance of extreme growth condition, production of antimicrobial compound, production of hydrogen peroxide, and enzymatic activity of bile salt hydrolase were investigated. DHK 4, 10, 21 and 74 strains showed_a strong tolerance property against extreme conditions such as low pH and 0.5% oxgall-supplemented medium. DHK 10 and 47 strains produced hydrogen peroxide on TMB agar plate. DHK 8 and 10 strains produced antimicrobial compounds onto MRS agar against E. facalis. DHK 4, 6, 21, 29, 33, 63 and 87 strains had high activities of bile salt hydrolase. Especially, DHK 10 displayed a strong probiotic candidate; the abilities to produce the antimicrobial compound, hydrogen peroxide, and bile salt hydrolase. All these strains are assumed to be useful probiotic candidates. Among 78, twenty seven strains which have probiotic properties were tentatively identified by 16S rRNA sequencing. Among them, 7 Lactobacillus spp., 6 Leuconosotoc spp., 2 Weisella spp., 1 Pediococcus sp., 1 Staphylococcus sp., 1 Enterococcus sp. and 2 Streptococcus spp. were tentatively identified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.262.1-262.1
• /
• 2014

Lipid peroxidation induces functional deterioration of cell membrane and induces cell death in extreme cases. These phenomena are known to be related generally to the change of physical properties of lipid membrane such as decreased lipid order or increased water penetration. Even though the electric property of lipid membrane is important, there has been no report about the change of electric properties after lipid peroxidation. Herein, we demonstrate the molecular energy band change in red blood cell membrane through peroxidation by air-based atmospheric pressure DBD plasma treatment. Ion-induced secondary electron emission coefficient (${\gamma}$ value) was measured by using home-made gamma-focused ion beam (${\gamma}$-FIB) system and electron energy band was calculated based on the quantum mechanical Auger neutralization theory. The oxidized lipids showed higher gamma values and lower electron work functions, which implies the change of surface charging or electrical conductance. This result suggests that modified electrical properties should play a role in cell signaling under oxidative stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.104-107
• /
• 2001

The fabricated La-modified lead titanate (PLT) thin flim without paling treatment was investigated for modulation frequency dependence of pyroelectric properties by the dynamic method. $Pb_{1-x}La_{x}Ti_{1-x/4}O_{3}$ PLT (x=0.1) thin film having 10 mol% La content was deposited on a $Pt/TiO_{x}/SiO_{2}/Si$ substrate by sol-gel method. The PLT(10) thin film exhibits a relatively excellent dielectric property. The pyroelectric coefficient (p) of the PLT(10) thin film is $6.6{\times}10^{-9}C/cm_{2}\cdot K$ without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are $1.03{\times}10^{-11}C\cdot cm/J$ and $1.46\times 10^{-9}C\cdot cm/J$, respectively. The PLT(10) thin film has voltage responsivity (Rv) of 5.15 V/W at 8 Hz. Noise equivalent power (NEP) and specific detectivity (D*) of the PLT(10) thin film are$9.93{\times}10^{-8}W/Hz^{1/2}$ and $1.81\times 10^{6}cmHz^{1/2}/W$ at the same frequency of 100 Hz, respectively. The results means that PLT thin film having 10 mol % La content is suitable for the sensing materials of pyroelectric IR sensors.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.629-632
• /
• 2007

While conventional interferometric SAR (InSAR) technique is an excellent tool for displacement observation, it is only sensitive to one-dimensional deformation along the satellite's line-of-sight (LOS). Recently, a multiple aperture interferogram (MAI) technique has been developed to overcome this drawback. This method successfully extracted along-track displacements from InSAR data, based on split-beam InSAR processing, to create forward- and backward- looking interferograms, and was superior to along-track displacements derived by pixel-offset algorithm. This method is useful to measure along-track displacements. However, it does not only decrease the coherence of MAI because three co-registration and resampling procedures are required for producing MAI, but also is confined to a suitable interferometric pair of SAR images having zero Doppler centroid. In this paper, we propose an efficient and robust method to generate MAI from interferometric pair having non-zero Doppler centroid. The proposed method efficiently improves the coherence of MAI, because the co-registration of forward- and backward- single look complex (SLC) images is carried out by time shift property of Fourier transform without resampling procedure. It also successfully removes azimuth flat earth and topographic phases caused by the effect of non-zero Doppler centroid. We tested the proposed method using ERS images of the Mw 7.1 1999 California, Hector Mine Earthquake. The result shows that the proposed method improved the coherence of MAI and generalized MAI processing algorithm.

• Biomolecules & Therapeutics
• /
• v.5 no.4
• /
• pp.325-330
• /
• 1997

Methanol extract of G. elata inhibited the binding of [/sup 3/H]Rol5-1788, a selective benzodiazepine receptor antagonest, to benzodiazepine receptor of rat cortices. Saturation experiments followed by Scatchard analysis of the results showed that the inhibition of [sub 3/H]Ro15-1788 binding by G. dlata. appeared to be com-petitive. These competitive inhibiton of the butanol fraction was observed to be higher than the methanol extract. Methanol extract of G. efara inhibited a [sub 3/H]flunitrazepam, a selective benzodiazepine receptor agonist, binding to benzodiazepine receptor. GABA significantly enhanced the inhibition of [/sub 3/H]flunitrazepam binding by G. elata, and these "positive GABA shift" supported the strong possibility of agonestic activity to benzodiazepine receptor Butanol fraction was observed to be higher than crude extract by methanol in an agonistic activity to benzodiazepine receptor, furthermore enhanced the binding of [sub 3/H]SR95531 to GABA receptor. Butanol fraction of G. elata significantly diminished the pentylenetetrazole-induced lethality of mice. From these results, it can be concluded that substance or substances with neurochemical properties characteri- stic of a benzodiazepine receptor agonist may be important components, and contribute to the anticonvulsant property of G. elata.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.5
• /
• pp.243-250
• /
• 2011

When alloys are vacuum-deposited on cooled substrates, super-rapidly cooled alloy films in the unequilibrium state can be obtained. As an application of this method, Ag-Cu, Ag-Ni and Ag-C alloys were successfully produced, and their mechanical properties with tempering temperature were investigated. The following results were obtained : (1) In case of Ag-Cu alloys, the solid solution was hardened by tempering at $150^{\circ}C$. The hardening is considered to occur when the solid solution begins to decompose into ${\alpha}$ and ${\beta}$ phases. The Knoop hardness number of a 40 at.%Ag-Cu alloy film deposited on a cooled glass substrate was 390 $kg/mm^2$. The as-deposited films were generally very hard but fractured under stresses below their elastic limits. (2) In case of Ag-Ni and Ag-C alloys, after the tempering of 4 at.%Ni-Ag alloy at $400^{\circ}C$ and of 1 and 2 at.%C-Ag alloys at $200^{\circ}C$, they were hardened by the precipitation of fine nickel and carbon particles. The linear relationship between proof stress vs. $(grain\;diameter)^{-l/2}$ for bulk silver polycrystals can be applied to vacuum-deposited films up to about 0.1 ${\mu}m$ grain diameter, but the proof stress of ultra-fine grained silver with grain diameters of less than 0.1 ${\mu}m$ was smaller than the value expected from the Petch's relation.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.458-463
• /
• 2009

Polyurethane (PU) is widely used as a cardiovascular biomaterial due to its good mechanical properties and hemocompatibility, but it is not adhesive to endothelial cells (ECs). Cell adhesive peptides, GRGDS and YIGSR, were found to promote adhesion and spreading of ECs and showed a synergistic effect when both of them were used. In this study, a surface modification was designed to fabricate an EC-active PU surface capable of promoting endothelialization using the peptides and poly(ethylene glycol) (PEG) spacer, The modified PU surfaces were characterized in vitro. The density of the grafted PEG on the PU surface was measured by acid-base back titration to the terminal-free isocyanate groups. The successful immobilization of pep tides was confirmed by amino acid analysis, following hydrolysis, and contact angle measurement. The uniform distribution of peptides on the surface was observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). To evaluate the EC adhesive property, cell viability test using human umbilical vein EC (HUVEC) was investigated in vitro and enhanced endothelialization was characterized by the introduction of cell adhesive peptides, GRGDS and YIGSR, and PEG spacer. Therefore, GRGDS and YIGSR co-immobilized PU surfaces can be applied to an EC-specific vascular graft with long-term patency by endothelialization.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.6
• /
• pp.728-737
• /
• 2005

This study was conducted to evaluate the physicochemical characteristics of pound cake made of substituted flour with different amount of $\beta-glucan$ i.e. 3, 6 and $9\%$ respectively. $\beta-glucan$ is a functional food material produced from Agrobacterium sup. R259 KCTC 10197BP. The specific gravity and pH of dough were found to be increased according to $\beta-glucan$ content Rheological property such as adhesiveness of dough has no difference between control and $\beta-glucan$ added groups. The pH of baked pound cake was not significantly different between control and $\beta-glucan$ groups. The volume of baked pound cake wag not significantly different between control and the ones with up to $6\%$ $\beta-glucan$, Lightness (L), redness (a) and yellowness (b) value of Hunter color system of cake crumb were not significantly different among teated groups, except a value of crust in $9\%$ $\beta-glucan$ group. the moisture content of cake increased according to $\beta-glucan$ content. Hardness by texture analyser was decreased with increasing $\beta-glucan$ content although cohesiveness wag not changed in β$\beta-glucan$ groups, compared with the control. Sensory evaluation results showed that the mean scores of over·all acceptability in 3 and $6\%$ $\beta-glucan$ were higher than that of control. Based on these results, the addition of $\beta-glucan$ to pound cake up to $6\%$ was considered to be desirable especially in terms of texture.