• Journal of Life Science
• /
• v.32 no.11
• /
• pp.865-871
• /
• 2022

Tenebrio molitor larvae is well known as edible insect. Then, although it has been widely studied that Tenebrio molitor larvae has various bioactive functions such as antioxidant, anti-wrinkle, and anticancer. Nevertheless, antioxidant effects of Tenebrio molitor larvae water extract (TMH) has not been well described in Adult Retina Pigment Epithelial cell line (ARPE-19). In this study, we demonstrated that antioxidant effects of TMH against H₂O₂-induced oxidative stress in ARPE-19. Thus, we selected for our studies and performed a series of dose-response assay to determine the working concentration that lead to a consistent and high degree of cytotoxicity, which we defined as the level of H₂O₂ that killed 40% of the ARPE-19 cells. ARPE-19 cells were pre-treated with various concentrations of TMH (0.1 up to 2 mg/ml) before exposure to 300 µM H₂O₂. As we expected, TMH effectively prevented ARPE-19 cells from 300 µM H₂O₂-induced cell death in a dose-dependent manner. Furthermore, TMH inhibited the phosphorylation of mitogen-activated protein kinases (MAPKs) such as extracellular signal regulated kinase (ERK), c-Jun N-terminal kinase (JNK), and p38. Overall, the inhibitory effects of TMH on H₂O₂-induced apoptosis and oxidative stress were associated with the protection cleaved caspase-3, Bax, Bcl-2, and HO-1. The TMH suppressed H₂O₂-induced cell membrane leakage and oxidative stress in ARPE-19 cells. Thus, these results suggest that the TMH plays an important role in antioxidant effect in ARPE-19.

• Elastomers and Composites
• /
• v.22 no.3
• /
• pp.204-212
• /
• 1987

The purpose of this study is to investigate the reinforced effect between MGF treated silane coupling agents and rubber matrix under the configuration chemical bonds, also the effect of triazine thiol compounds. For this study, vulcanizates were prepared with fifteen different compounding formulas. Their vulcanization characteristics, physical properties were examined by means of the ODR(Oscillating Dist Rheometer), the tensile tester, the benzene swelling test. The results of this study obtained are as follows: 1. In the ODR test, the MA vulcanizate was the fastest one in terms of having reached to optimum cure time($t_{90}$) and, with the same formula, when MGF vulcanizates, the shortest optimum cure times has appeared. 2. The SA, SC vulcanizates were the best the other in the physical properties such as 100%modulus, 200%modulus, 300%modulus, tensile strength. The SB vulcanizate, with higher density of crosslinking than other vulcanizates. The vulcanizates, which were filled with MGF treated with silane coupling agents we were the higher density of crosslinking than vulcanizates filled with MGF only. 3. In aging properties, the silica vulcanizates appeared to be better than the other vulcanizates. The aging Properties of treated MGF vulcanizates were similar to the silica vulcanizates. The(CR+APS+silica) and(CR+APS+MCF) were easily crosslinked by exposure to the air, and the physical properties have been improved.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.261-283
• /
• 2023

This study aimed to review the performance stability of PET (Polyethylene terephthalate) fiber reinforcing materials among the synthetic fiber types for which the application of performance reinforcing materials to fiber-reinforced concrete is being reviewed by examining short-term and long-term performance changes. To this end, the residual performance was analyzed after exposing the PET fiber to an acid/alkali environment, and the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture by age were analyzed, and the surface of the PET fiber collected from the concrete specimen was examined using a scanning microscope (SEM). The changes in were analyzed. As a result of the acid/alkali environment exposure test of PET fiber, the strength retention rate was 83.4~96.4% in acidic environment and 42.4~97.9% in alkaline environment. It was confirmed that the strength retention rate of the fiber itself significantly decreased when exposed to high-temperature strong alkali conditions, and the strength retention rate increased in the finished yarn coated with epoxy. In the test results of the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture, no reduction in flexural strength was found, and the equivalent flexural strength result also did not show any degradation in performance as a fiber reinforcement. Even in the SEM analysis results, no surface damage or cross-sectional change of the PET reinforcing fibers was observed. These results mean that no damage or cross-section reduction of PET reinforcing fibers occurs in cement concrete environments even when fiber-reinforced concrete is exposed to high temperatures in the early stage or depending on age, and the strength of PET fibers decreases in cement concrete environments. The impact is judged to be of no concern. As the flexural strength and equivalent flexural strength according to age were also stably expressed, it could be seen that performance degradation due to hydrolysis, which is a concern due to the use of PET fiber reinforcing materials, did not occur, and it was confirmed that stable residual strength retention characteristics were exhibited.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.17-32
• /
• 2023

The entrepreneurial activities of college students play a significant role in modern economic and social development, particularly as a solution to the changing economic landscape and youth unemployment issues. Introducing innovative ideas and technologies into the market through entrepreneurship can contribute to sustainable economic growth and social value. Additionally, the entrepreneurial intentions of college students are shaped by various factors, making it crucial to deeply understand and appropriately support these elements. To this end, this study systematically explores the importance and impact of role models through a multiple serial mediation analysis. Through a survey of 300 college students, the study analyzed how two psychological variables, growth mindset and entrepreneurial self-efficacy, mediate the influence of role models on entrepreneurial intentions. The presence and success stories of role models were found to enhance the growth mindset of college students, which in turn boosts their entrepreneurial self-efficacy and ultimately strengthens their entrepreneurial intentions. The analysis revealed that exposure to role models significantly influences the formation of a growth mindset among college students. This mindset fosters a positive attitude towards viewing challenges and failures in entrepreneurship as learning opportunities. Such a mindset further enhances entrepreneurial self-efficacy, thereby strengthening the intention to engage in entrepreneurial activities. This research offers insights by integrating various theories, such as mindset theory and social learning theory, to deeply understand the complex process of forming entrepreneurial intentions. Practically, this study provides important guidelines for the design and implementation of college entrepreneurship education. Utilizing role models can significantly enhance students' entrepreneurial intentions, and educational programs can strengthen students' growth mindset and entrepreneurial self-efficacy by sharing entrepreneurial experiences and knowledge through role models. In conclusion, this study provides a systematic and empirical analysis of the various factors and their complex interactions that impact the entrepreneurial intentions of college students. It confirms that psychological factors like growth mindset and entrepreneurial self-efficacy play a significant role in shaping entrepreneurial intentions, beyond mere information or technical education. This research emphasizes that these psychological factors should be comprehensively considered when developing and implementing policies and programs related to college entrepreneurship education.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.48-58
• /
• 2024

Salmonella is a common food-borne intracellular bacterial pathogen that has triggered significant public health concerns. Salmonella hosts' genetic factors play a pivotal role in determining their susceptibility to the pathogen. Cysteine-rich intestinal protein 1 (CRIP1), a member of LIM/double zinc finger protein family, is widely expressed in humans, such as in the lungs, spleen, and especially the gut. Recently, CRIP1 has been reported as a key marker of several immune disorders; however, the effect of CRIP1 on bacterial infection remains unknown. We aimed to elucidate the relationship between Salmonella infection and CRIP1 gene deficiency, as Salmonella spp. is known to invade the Peyer's patches of the small intestine, where CRIP1 is highly expressed. We found that CRIP1-deficient conditions could not alter the characteristics of bone marrow-derived myeloid cells in terms of phagocytosis on macrophages and the activation of costimulatory molecules on dendritic cells using ex vivo differentiation. Moreover, flow cytometry data showed comparable levels of MHCII⁺CD11b⁺CD11c⁺ dendritic cells and MHCII⁺F4/80⁺CD11b⁺ macrophages between WT and CRIP1 knockout (KO) mice. Interestingly, the basal population of monocytes in the spleen and neutrophils in MLNs is more abundant in a steady state of CRIP1 KO mice than WT mice. Here, we demonstrated that the CRIP1 genetic factor plays dispensable roles in host susceptibility to Salmonella Typhimurium infections and the activation of myeloid cells. In addition, differential immune cell populations without antigen exposure in CRIP1 KO mice suggest that the regulation of CRIP1 expression may be a novel immunotherapeutic approach to various infectious diseases.

• Journal of Food Hygiene and Safety
• /
• v.39 no.3
• /
• pp.250-259
• /
• 2024

In this study, we investigated in pesticide residues and heavy metals in fermented liquor products (wine, beer, makgeolli). Targeted analysis of 400 pesticide residues in the sample was performed using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method, followed by gas chromatography-tandem mass spectrometry (MS/MS) and LC-MS/MS. The contents of heavy metals (Pb, Cd) were determined by ICP-MS using the microwave method. The mercury was measured using a mercury analyzer. From the analysis of 150 cases, 102 (68.0%) cases of fermented liquor were detected, and 35 pesticide residues (including metalaxyl, mandipropamid, azoxystrobin, and fenhexamid) were detected among the 400 pesticide residues tested. Pb, Cd, and Hg were tested in 150 samples. Lead was detected in 73 samples (48.7%), cadmium in 9 samples (6.0%), and mercury in 36 samples (24.0%). Exposure assessment was conducted to determine the safety of the detected pesticide residues and heavy metals. According to this assessment, the pesticide residues and heavy metals showed very low %ADI values (less than 1%).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.77-82
• /
• 2010

Purpose: As PET/CT come into wide use, it caused increasing of expose in clinical use. Therefore, Korea Food and Drug Administration issued Patient DRL (Diagnostic Reference Level) in CT scan. In this study, to build the basis of patient dose reduction, we analyzed effective dose in transmission scan with CT scan. Materials and Methods: From February, 2010 to March 180 patients (age: $55{\pm}16$, weight: $61.0{\pm}10.4$ kg) who examined $^{18}F$-FDG PET/CT in Asan Medical Center. Biograph Truepoint 40 (SIEMENS, GERMANY), Biograph Sensation 16 (SIEMENS, GERMANY) and Discovery STe8 (GE healthcare, USA) were used in this study. Per each male and female average of 30 patients doses were analyzed by one. Automatic exposure control system for controlling the dose can affect the largest by a patient's body weight less than 50 kg, 50-60 kg less, 60 kg more than the average of the three groups were divided doses. We compared that measured value of CT-expo v1.7 and ImPACT v1.0. The relationship between body weight and the effective dose were analyzed. Results: When using CT-Expo V1.7, effective dose with BIO40, BIO16 and DSTe8 respectably were $6.46{\pm}1.18$ mSv, $9.36{\pm}1.96 $mSv and $9.36{\pm}1.96$ mSv for 30 male patients respectably $6.29{\pm}0.97$ mSv, $10.02{\pm}2.42$ mSv and $9.05{\pm}2.27$ mSv for 30 female patients respectably. When using ImPACT v1.0, effective dose with BIO40, BIO16 and DSTe8 respectably were $6.54{\pm}1.21$ mSv, $8.36{\pm}1.69$ mSv and $9.74{\pm}2.55$Sv for 30 male patients respectably $5.87{\pm}1.09$ mSv, $8.43{\pm}1.89$ mSv and $9.19{\pm}2.29$ mSv for female patients respectably. When divided three groups which were under 50 kg, 50~60 kg and over 60 kg respectably were 6.27 mSv, 7.67 mSv and 9.33 mSv respectably using CT-Expo V1.7, 5.62 mSv, 7.22 mSv and 8.91 mSv respectably using ImPACT v1.0. Weight and the effective dose coefficient analysis showed a very strong positive correlation(r=743, r=0.693). Conclusion: Using such a dose evaluation programs, easier to predict and evaluate the effective dose possible without performing phantom study and such dose evaluation programs could be used to collect basic data for CT dose management.

• Korean Journal of Environmental Biology
• /
• v.22
• /
• pp.54-62
• /
• 2004

We examined the impacts of anthyopogenic pollutant (benzo〔a〕pyrene) on the growth and photosynthesis of five marine phytoplankton species (Skeletonema costatum, Heterosigma akashiwo, Prorocentrum dentatum, P. minimum, Aknshiwo sanguinea), which are dominant in Korean coastal water. After the 72 h exposure to benzo〔a〕pyrene, the dramatic decrease in cell numbers was observed in the range of 1 to 10 $\mu\textrm{g}$ L$^{-1}$ for S. costatum, P. minimum, P. dentatum, whereas for A. sanguinea and H. akashiwo at the low concentrations 0.1 to 1 $\mu\textrm{g}$ L$^{-1}$ . Among the 5 phytoplankton species, the highest growth inhibition concentration ($IC_{50}$/) was 6.20 $\mu\textrm{g}$ L$^{-1}$ for P. minimum, followed by 2.14 $\mu\textrm{g}$ L$^{-1}$ for P. dentatum, 1.68 $\mu\textrm{g}$ L$^{-1}$ for S. costatum, 0.74 $\mu\textrm{g}$ L$^{-1}$ for H. akashiwo, 0.10 $\mu\textrm{g}$ L$^{-1}$ for A. sanguinea. The five species exposed to the low concentration of 1 $\mu\textrm{g}$ L$^{-1}$ were recovered after transferring to new media, but the species exposed to the high concentrations of 10 and 100 $\mu\textrm{g}$ L$^{-1}$ were not recovered, with the exception of P. minimum. Those results indicate that the thecate dinoflagellate P. minimum is most tolerant to the chemical and the athecate dinoflagellate A. sanguinea is not. Geneyally, the cell-specific photosynthetic capacity of H. akashiwo exposed to the low concentrations of 0.1 and 1 $\mu\textrm{g}$ L$^{-1}$ was higher than that of the cells in the control, whereas the cells exposed to the high concentrations of 5 and 10 $\mu\textrm{g}$ L$^{-1}$ showed the negligible photosynthetic level by the first few days of the experiment. In the case of the cells exposed to the concentration of 5 $\mu\textrm{g}$ L$^{-1}$ , after 12 days of the experiment the photosynthetic capacity was increased toward the end of the experiment. This indicates that H. akashiwo may utilize the benzo〔a〕pyrene as a carton source for its growth when exposed to low concentrations. Results suggest that anthropogenic pollutants such as benzo〔a〕pyrene may have significant influence on the succession of phytoplankton species composition and the primary production in coastal marine environments.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2010

Objective: To investigate assisted reproductive technology (ART) outcomes in women with WHO class I anovulation compared with control group. Design: Retrospective case-control study. Methods: Twenty-three infertile women with hypogonadotropic hypogonadism (H-H) who undertook ART procedure from August 2003 to January 2009 were enrolled in this study. A total of 59 cycles (H-H group) were included; Intra-uterine insemination with super-ovulation (SO-IUI, 32 cycles), in vitro fertilization with fresh embryo transfer (IVF-ET, 18 cycles) and subsequent frozenthawed embryo transfer (FET, 9 cycles). Age and BMI matched 146 cycles of infertile women were collected as control group; 64 cycles of unexplained infertile women for SO-IUI and 54 cycles of IVF-ET and 28 cycles of FET with tubal factor. We compared ART and pregnancy outcomes such as clinical pregnancy rate (CPR), clinical abortion rate (CAR), and live birth rate (LBR) between the two groups. Results: There was no difference in the mean age ($32.7{\pm}3.3$ vs. $32.6{\pm}2.7$ yrs) and BMI ($21.0{\pm}3.1$ vs. $20.8{\pm}3.1kg/m^2$) between two groups. Mean levels of basal LH, FSH, and $E_2$ in H-H group were $0.62{\pm}0.35$ mIU/ml, $2.60{\pm}2.30$ mIU/ml and $10.1{\pm}8.2$ pg/ml, respectively. For ovarian stimulation, H-H group needed higher total amount of gonadotropin injected and longer duration for ovarian stimulation (p<0.001). In SO-IUI cycles, there was no significant difference of CPR, CAR, and LBR between the two groups. In IVF-ET treatment, H-H group presented higher mean $E_2$ level on hCG day ($3104.8{\pm}1020.2$ pg/ml vs. $1878.3{\pm}1197.7$ pg/ml, p<0.001) with lower CPR (16.7 vs. 37.0%, p=0.11) and LBR (5.6 vs. 33.3%, p=0.02) and higher CAR (66.7 vs. 10.0%, p=0.02) compared with the control group. However, subsequent FET cycles showed no significant difference of CPR, CAR, and LBR between the two groups. Conclusion: H-H patients need higher dosage of gonadotropin and longer duration for ovarian stimulation compared with the control groups. Significantly poor pregnancy outcomes in IVF-ET cycles of H-H group may be due to detrimental endometrial factors caused by higher $E_2$ level and the absence of previous hormonal exposure on endometrium.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.375-387
• /
• 2012

The objective of this study is investigation of contamination levels and assessment of health risk effects of heavy metals in herbal pills. 31 Items and 93 samples were obtained for this investigation from major herbal medicine producing areas, herbal markets and on-line supermarkets from Jan to Jun in 2010. Inductively coupled plasma mass spectrometer method was conducted for the quantitative analysis of Pb, Cd and As. In addition, the mercury analyzer system was conducted for that of Hg without sample digestion. The average contents of heavy metals in samples were as follows : 0.87 mg/kg for Pb, 0.08 mg/kg for Cd, 2.87 mg/kg for As and 0.16 mg/kg for Hg, respectively. In addition, the average contents of heavy metals in different parts of plants, including cortex, fructus, herba, radix, seed, algae and others were 0.63 mg/kg, 3.94 mg/kg, 1.42 mg/kg, 1.05 mg/kg, 0.16 mg/kg, 22.31 mg/kg and 10.17 mg/kg, respectively. After the estimations of dietary exposure, the acceptable daily intake (ADI), the average daily dose (ADD), the provisional tolerable weekly intake (PTWI) and the relative hazard of heavy metals were evaluated. As the results, the relative hazards compared to PTWI in samples were below the recommended standard of JECFA as Pb 3.1%, Cd 0.9%, Hg 0.5%. Cancer risks through slope factor (SF) by Ministry of Environment Republic Korea and Environmental Protection Agency was $4.24{\times}10^{-7}$ for Pb and $3.38{\times}10^{-4}$ for As (assuming that the total arsenic content was equal to the inorganic arsenic). Based on our results, possible Pb-induced cancer risks in herbal pills according to parts used including cortex, fructus, herba, radix, seed, algae and others were $1.95{\times}10^{-7}$, $1.45{\times}10^{-6}$, $2.14{\times}10^{-7}$, $6.27{\times}10^{-7}$, $1.99{\times}10^{-8}$, $3.61{\times}10^{-7}$ and $9.64{\times}10^{-8}$, respectively. Possible As-induced cancer risks in herbal pills by parts used including cortex, fructus, herba, radix, seed, algae and others were $1.54{\times}10^{-5}$, $7.24{\times}10^{-5}$, $1.23{\times}10^{-4}$, $2.02{\times}10^{-5}$, $3.25{\times}10^{-6}$, $2.18{\times}10^{-3}$ and $5.67{\times}10^{-6}$ respectively. Taken together, these results indicate that the majority of samples except for some samples with relative high contents of heavy metals were safe.