• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.407-416
• /
• 2003

In this study, we evaluate the correlation between in vitro and in vivo determination of SPF of sunscreen products containing various ingredients depending on emulsification system. For in vitro approach, we determined SPF by the method of Diffey and Robson using an TransporeTM tape(3M Health care, USA) and SPF 290-analyzer(Optometrics Co. USA). SPF values and standard deviations are calculated and displayed after completion of the run. In vivo SPF values are determined according to KFDA (the Korea Food and Drug Administration) method in panels of Fitzpatrick's skin type II or III. We investigated the difference in SPF data of sunscreen ingredient according to emulsification system. The in vivo SPF data is high in water-in oil(W/O) emulsion than in oil-in water(O/W) emulsion samples. The difference may be due to the particular behavior in each vehicles and its presence on skin surface may produce a different sunscreen film. We obtained the corrlation coefficient between in vitro and in vivo SPF data for O/W (R-squre=0.72 )and W/O emulsion(R-squre=0.77). From these results, we suggest the improvement of methodology using Transpore$^{TM}$ tape as substrate to increase the predictability of in vitro method.d.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2002.05a
• /
• pp.138-138
• /
• 2002

In recent years, the safety of sunscreens has been challenged based on the reports of its adverse effect on users; dermatitis, allergic contact dermatitis, photoallergic contact dermatitis. To investigate a correlation between sun protection factor (SPF) and the safety of sunscreens, we measured in vitro SPF index using homosalate as a standard and examined the toxicity tests on cosmetics; primary and cumulative skin irritation tests, ocular irritation test, and skin sensitization test.(omitted)

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.2
• /
• pp.137-141
• /
• 2011

Sunscreen is divided into the organic agent of UV absorption and inorganic agent of reflection. These are evaluated by sun protection factor (SPF) in-vivo test requiring high cost and time, while in-vitro tests are adopted commonly because of short test time, easy result collection. Generally, test method of SPF use SPF 290a by UV-vis spectrometer. The evaluate by SPF 290 has low reproducibility. Although analysis using UV-vis spectrometer has high reproducibility, it is hard to separated results of transmission, adsorption, and reflection. In this study, suggested method of elipsometer has some merit such as high reproducibility, easy separation of transmission/adsorption/re- flection, analysis using various incident angle. We tested the validity of elipsometer for SPF measurement, using commercially available sun-block (SPF 50).

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.159-166
• /
• 2017

Exposure to UV light, i.e., UV-A (320-400 nm) or UV-B (290-320 nm) radiation, can cause skin cancer. Titanium dioxide ($TiO_2$) effectively disperses UV light. Therefore, it is used as a physical UV filter in many UV light blockers. Usually, the $TiO_2$ content in commercialized UV blockers is 25 % at most. To block UV-B, a chemical UV blocker, octyl-methoxy cinnamate (OMC) is used. OMC is commonly used in combination with $TiO_2$. In this study, $TiO_2$ and OMC were mixed in different proportions to produce UV blockers with different compositions. Also the changes in the sun protection factor (SPF) based on the composition and $TiO_2$ particle sizes were investigated. In order to analyze the $TiO_2$ particle size, dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) were used. The results showed that the SPF was influenced by the proportion of $TiO_2$ and OMC, where the proportion of $TiO_2$ induced a more significant influence. In addition, changes in the $TiO_2$ particle size based on the proportion of OMC were observed.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.411-416
• /
• 2005

The aim of the present work was to prepare the nanosuspension of inorganic pigment which shows light reflection and scattering as efficient sunscreen. The zinc oxide (ZnO) was chosen as an inorganic pigment, and high pressure homogenizer and bead mill have been used for the preparation of nanosuspension. The ZnO nanosuspensions were characterized by particle size, in vitro sun protection factor (SPF) and UV transmittance. ZnO nanosuspension prepared by bead mill showed the average diameter of $119{\pm}4\;nm$, resulting in the high value of SPF $(28.74{\pm}2.06,\;n=20)$, while that prepared by high pressure homogenizer showed the average diameter of $751{\pm}32\;nm$ with the relative lower value of SPF $(21.38{\pm}1.94\;n=20)$. In addition, the film of ZnO nanosuspension prepared by bead mill was showed a high visible ray (VIS) transmittance, indicating a high transparency. In conclusion, a physically stable ZnO nanosuspension in cyclomethicone was successfully prepared using bead mill for the suitable sunscreen preparations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3312-3318
• /
• 2014

For the sunscreen development from natural resources, a possible usage of microalgal extracts or mycosporine-like amino acids (MAAs) was investigated. Sunscreens containing 7% of microalgal extracts or MAAs derived from microalgae, Chlamydomonas hedleyi, were prepared and they were applied to human research. Through this clinical research, the values of Sun Protection Factors, Sun Protector Factor (SPF) and Protection Factor of UVA (PFA), of sunscreen containing microalgal extracts or MAAs were determined: SPF values of microalgal extracts and MAAs indicated 9.07 and 9.42, respectively, while PFA ones did 2.43 and 2.41. Due to more than 2 of PFA value in both sunscreens, they can be classified into [PA+]. Taken together, although sunscreen containing microalgae-derived extracts or MAAs does not effectively protect UV irradiation, its capacity can be satisfied if inorganic UV-protecting compounds are added.

• Journal of the Korean Society of Costume
• /
• v.56 no.2 s.101
• /
• pp.147-154
• /
• 2006

In this study 1, the dyeability and sun protection characteristic of the fabrics dyed with pine needles extract was investigated. In the test of color difference, the surface color of all the dyed fabric of both cotton and silk came to light as greenish yellow. In the test of dyeing colorfastness, the colorfastness to sunlight of dyed cotton fabric was below 2nd grade and the one of dyed silk fabric was below 3rd grade. The colorfastness to laundry for the degree of discoloration showed a difference as to mordants, but the colorfastness to laundry for the degree of contamination was excellent as all the dyed fabrics were 4th-5th grade. The colorfastness to perspiration was excellent as the degree of discoloration was more than 3rd grade and the degree of contamination was more than 4th-5th grade. The colorfastness to rubbing showed the excellent result as all the dyed fabrics were 4th-5th grade. In the test of sun protection factor(SPF), the cotton and silk fabrics dyed with $FeSO_4{\cdot}7H_{2}O$ mordant showed very high sun protection characteristic as the SPF was each 36.1 and 42.5. In the test of sun protection rate for UV-A and UV-B, the cotton and silk fabrics dyed with $FeSO_4{\cdot}7H_{2}O$ mordant showed the very high sun protection rate of more than $90\%$.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.370-377
• /
• 2010

This study evaluated SPF (Sun Protection Factor) of various quntity and kind of sunscreen ingredients which is used in O/W and W/O emulsion by systematic and quantitative approach. Octylmethoxycinnamate(OMC), Buthylmethoxydibenzoylmethan (BMDM), Octocrylene (OC), Octylsalicylate(OS), Octyl Triazone (OT), Titanium dioxide (TD) are used for the experiment. As a result, when different chemical sunscreen ingredients are added to OMC, the synergy effect of SPF was high in order of BMDM, OC, OS, OT. There was no significant difference in O/W and W/O emulsions. It can be a guide to use sunscreen ingredients effectively when the relation between the results of in vitro SPF and in vivo SPF is comprehended.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.422-439
• /
• 2014

In this study, we measured the effects of UV protection efficiency of the polarity of oil, the type of emulsion, the viscosity of product, the type of thickener and light stabilizer in sunscreen. As a result, even higher polarity of the oil, UV protection efficiency is measured high (Butyloctyl salicylate: SPF 44.10, PA 7.93). In case of low, it was measured low conversely (Dimethicone: SPF 16.40, PA 5.57). In case of emulsion types, UV protection efficiency of W/O emulsion which organic sunscreen agent is based in the outer phase is measured higher than O/W emulsion. According to increasing of viscosity, UV protection efficiency tends to increase proportionally. However, the size of emulsion particles and the kinds of thickener has no effect to UV protection efficiency. Also light stabilizer was found to be an important factor affecting the UV protection efficiency. As a result, it is able to improve UV protection efficiency and it has potential which improve the economical effect of the sunscreen without increasing sunscreen agents.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2002.11b
• /
• pp.195-195
• /
• 2002

In recent years, the safety of sunscreens has been challenged based on the reports of its adverse effect on users; dermatitis, allergic contact dermatitis, photoallergic contact dermatitis. To investigate a correlation between sun protection factor (SPF) and the safety of sunscreens, we measured in vitro SPF index using homosalate as a standard and examined the toxicity tests on cosmetics; primary skin irritation tests, ocular irritation test, and skin sensitization test.(omitted)