• Cement
• /
• s.30
• /
• pp.44-50
• /
• 1969

To manufacture portland cement and sulfuric acid from gypsum has long been established in Europe. As sulfur, more Precisely sulfuric acid, is getting around shortage, it boosts hunt for alternate sources and for new fertilizer process. As the result, all

• The Korean Journal of Ecology
• /
• v.21 no.1
• /
• pp.65-72
• /
• 1998

Various effects of simulated acid rain by $HNO_3$ and $H_2SO_4$ with pH 3.2, 4.2 and 5.6 were investigated in Melilotus suaveolens Ledeb, a biennial legume dominating the disturbed and poor soil vegetations. The nitric acid treatment of pH 3.2 resulted in 121% increase of the plant height compared to that of pH 5.6 during early growth, although 17% decrease was detected with the sulfuric acids. During 14 days of treatment, leaf biomass and chlorophyll content increased 168% and 133% with pH 3.2 nitric acid rain but decreased 20% and 38%, respectively, with sulfuric acid rain. Nitrogen content in various organs was also determined after 42 days of nitric acid treatment. It increased 480% and 387% by pH 3.2 and 4.2 in leaves, 212% and 214% in stems and 247% and 249% in roots. However, the same treatment with the sulfuric acid showed a considerable reduction in this content, indicating that the nitric acid was a nitrogen source. Nodule formation assayed revealed 15% decrease with pH 3.2 in contrast to 157% increase in pH 4.2, further suggesting an enhancement effect by the additional nitrogen source. Contrary to this, the nodule formation was reduced up to 43-71% by sulfuric acid rains. Specific nitrogen fixation activities of nodules estimated at pH 3.2, 4.2 and 5.6 nitric acid rain were 36.7, 42.8 and 47.3 ${\mu}mol\;C_2H_4{\cdot}g^{-1}\;fw\;nodule{\cdot}h^{-1}$, while those of sulfuric acid rain exhibited 1 nmol $C_2H_4{\cdot}plant^{-1}{\cdot}h^{-1}$ with pH 3.2, 177 with pH 4.2 and 179 with pH 5.6, yet it increased 2, 115 and 286 respectively corresponding to the three sulfuric acid concentrations. Further implications of the simulated acied rain were also discussed in the study.

• Corrosion Science and Technology
• /
• v.22 no.5
• /
• pp.351-358
• /
• 2023

Although many thermal power plants use heat recovery systems, high exhaust gas temperatures are maintained due to corrosion at dew points and ash deposits caused by condensate formation. The dew point of exhaust gas is primarily determined by the concentration of SO₃ and steam, and various experiments and calculation equations have been employed to estimate it. However, these methods are known to be less suitable for exhaust gases with low SO₃ concentrations. Therefore, in this study, since the temperature of the exhaust gas is expected to decrease due to the low-load operation of the coal-fired power plant, sulfuric acid condensation and low-temperature corrosion are anticipated. We aimed to conduct a quantitative evaluation to propose ways to prevent damage by limiting operating conditions and improving facilities. The experimental results showed that the corrosion rate increased linearly with rising temperatures at a certain sulfuric acid concentration. Furthermore, variations in sulfuric acid concentrations generated during the current power plant operation process did not significantly affect the dew point, and the dew point of sulfuric acid under these conditions was observed to be between 120 - 130 ℃.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.664-666
• /
• 1987

In this study, the computation of optimum operating conditions for catalytic oxidation of sulfur dioxide to sulfur trioxide in CONVERTER which determines the yield ultimately in sulfuric acid plant is performed on an IBM/XT computer. The process simulator of rigorous converter model including mass & energy balance equations and supporting equations is linked to optimizer, which produces the desired results successfully.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.719-722
• /
• 2004

Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. The purposed of this paper is to form a part of reducing the damage of sulfuric acid, through investigating recycled PET polymer concrete, . immersed at sulfuric acid solution for 84 days. Recycled PET PC is excellent chemical resistance, resulting in the role of unsaturated polyester resin which consists of polymer chain structure accomplishes bond of aggregates and filler strongly. Also, Recycled PET PC, used fly-ash as filler, is stronger resistance of sulfuric acid corrosion than $CaCO_3$, because it is composed of $SiO_2$ and very strong glassy crystal structure. Therefore, Recycled PET PC, used fly-ash as filler, is available under corrosion circumstances like sewer pipe or waste disposal plant.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.433-440
• /
• 2022

Environmental pollution caused by power plant exhaust gas is highlighted and eco-friendly regulations are being strengthened. However, due to the abundant reserves and low prices of coal, still the most used for power generation in the world. Therefore, flexible operation of coal-fired power plants to reduce emissions has become an inevitable option. However, lowering the output increases the possibility of acid dew point corrosion as the exhaust gas temperature decreases. The dew point corrosion occurs when condensable gases such as SO₃, HCl, NO₂ and H₂O cools below the saturation temperature. SO₃ is already well known to cause severe low- temperature corrosion in coal-fired power plants. Therefore, this study aims to prevent damage that may occur during operation by analyzing the dew point and corrosion resistance with exhaust gas temperature and sulfuric acid concentration of the power plant economizer tube.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.831-840
• /
• 2009

In order to evaluate the start-up behavior and to identify, through abnormal operation occurrences, the transient behaviors of the Sulfur Iodine(SI) process, which is a nuclear hydrogen process that is coupled to a Very High Temperature Gas Cooled Reactor (VHTR) through an Intermediate Heat Exchanger (IHX), a dynamic simulation of the process is necessary. Perturbation of the flow rate or temperature in the inlet streams may result in various transient states. An understanding of the dynamic behavior due to these factors is able to support the conceptual design of the secondary helium loop system associated with a hydrogen production plant. Based on the mass and energy balance sheets of an electrodialysis-embedded SI process equivalent to a 200 $MW_{th}$ VHTR and a considerable thermal pathway between the SI process and the VHTR system, a dynamic simulation of the SI process was carried out for a sulfuric acid decomposition process (Second Section) that is composed of a sulfuric acid vaporizer, a sulfuric acid decomposer, and a sulfur trioxide decomposer. The dynamic behaviors of these integrated reactors according to several anticipated scenarios are evaluated and the dominant and mild factors are observed. As for the results of the simulation, all the reactors in the sulfuric acid decomposition process approach a steady state at the same time. Temperature control of the inlet helium is strictly required rather than the flow rate control of the inlet helium to keep the steady state condition in the Second Section. On the other hand, it was revealed that the changes of the inlet helium operation conditions make a great impact on the performances of $SO_3$ and $H_2SO_4$ decomposers, but no effect on the performance of the $H_2SO_4$ vaporizer.

• Korean Journal of Pharmacognosy
• /
• v.42 no.1
• /
• pp.82-88
• /
• 2011

This study was carried out to investigate the optimum conditions for extraction of soluble acidic polysaccharides from ginseng marc. Method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharides in ginseng marc. The amounts of soluble acidic polysaccharides in water extract of ginseng marc were increased with increasing extraction temperature. The contents of acidic polysaccharides were not significantly different despite the extraction time increasing from 0.5 hours to 6 hours. To estimate the rehydration rate of the freeze dried polysaccharide, the extracted acidic polysaccharide fraction powder was determined the amount of soluble acidic polysaccharides by carbazole-sulfuric acid method again. The rehydration rate of acidic polysaccharides from water-extract of red ginseng marc at room temperature was 100%. On the other hand, the rehydration rate of acidic polysaccharide of red ginseng marc at boiling temperature was about 50%. The rehydration rate of acidic polysaccharides from water-extract of white ginseng marc at room temperature was 50%. The rehydration rate of acidic polysaccharide of red ginseng marc at boiling temperature was about 40%. The rate of soluble acidic polysaccharide of Red Ginseng is higher than that of White Ginseng. We can find out the maximum extraction method of soluble acidic polysaccharide from ginseng marc.

• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.48-53
• /
• 2000

Lacquer tree can be proliferated by root or stem cutting, and seed. In case of proliferation by seed, however, the germination rate is very low. Thus, the present study was carried out to obtain aspceptic lacquer plant in vitro from seed because natural tissue culture was highly defiled by unknown fungi and bacteria. First seed grading on distilled water was 50.7% and second seed grading was 20.8% after 98% sulfuric acid treatment for 2 hours. Removal of inner seed coat was higher with 32.4% than non-removal of outer seed coat and removal outer seed coat in rooting rate. In germination rate according to pre-treatment, growth regulators were not effective at all, but sulfuric acid was effective a little with 3%. Removal outer seed coat was increased about 4%, that germinated about 10% in MS medium supplemented with 1.0mg/L BA and 0.05mg/L NAA, 1.0mg/L BA. Lacquer tree seeds germinated after 10 days in MS medium, and aspceptic seedling of lacquer tree were obtained after 3 weeks in vitro. Germination rate, however, was lower about 10%.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.70-76
• /
• 1999

Because of the tight pollution control of $SO_2$ emission, sulfuric acid manufacturers have been interested in the operation with the highest possible conversion efficiency. In this work, the design criteria and operating conditions of the catalytic converter were investigated for maximum conversion efficiency and minimum $SO_2$ emission by parametric analysis and process optimization for the existing acid plants. The Double Converter/Double Absorber(DC/DA) process was investigated by varying $SO_2$ compositions of feed gas, pressures and temperatures of layers of the converter and the depth of the catalyst beds. In order to evaluate the process, a computer simulator for sulfuric acid plants has been developed. The results by process optimization could be used for the converter design and operating conditions with highest conversion efficiency.