• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.152-157
• /
• 1988

The effect of gypsum application was tested on dry matter yield, sulfur uptaken, composition of Ritrogen compound and sulhr compound and sulfur balance in mixed pasture. Total dry matter yields and sulfur uptake by grasses increased with the increasing of gypsum application rates. The ratios between total nitrogen and total sulfur in masses decreased with the increase of sulfur uptake at 2nd and 3rd cutting times. Cysteine content was little affected by gypsum while methionine content slightly increased an 4.0, 6.0 kg3 per 10a levels at 2nd and 3rd cutting times. The uptake of nitrate nitrogen decreased with gypsum application and dry matter digestibility increased about 1.1 to 3.3%. The soil pHs after experiment become high in surface and subsoil till 6.0 kg.S per 10a, but low at 10.0 kg.S per 10a. The content of sulfur in surface soil was 19.9 ppm after experiment, but very high in subsoi1,ranging from 94 to 143 ppm.S. Sulfur leached from the surface soil by 0.69, 2.39, and 6.24 kg.S per 10a in the plots of 4.0, 6.0, and 10.0 kg.S per 10a, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.664-666
• /
• 1987

In this study, the computation of optimum operating conditions for catalytic oxidation of sulfur dioxide to sulfur trioxide in CONVERTER which determines the yield ultimately in sulfuric acid plant is performed on an IBM/XT computer. The process simulator of rigorous converter model including mass & energy balance equations and supporting equations is linked to optimizer, which produces the desired results successfully.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.8
• /
• pp.1155-1160
• /
• 2012

Sulfur-utilizing autotrophic denitrification relies on an inorganic carbon source to reduce the nitrate by producing sulfuric acid as an end product and can be used for the treatment of wastewaters containing high levels of nitrates. In this study, sulfur-denitrifying bacteria were used in anoxic batch tests with sulfur as the electron donor and nitrate as the electron acceptor. Various medium components were tested under different conditions. Sulfur denitrification can drop the medium pH by producing acid, thus stopping the process half way. To control this mechanism, a 2:1 ratio of sulfur to oyster shell powder was used. Oyster shell powder addition to a sulfur-denitrifying reactor completely removed the nitrate. Using 50, 100, and 200 g of sulfur particles, reaction rate constants of 5.33, 6.29, and $7.96mg^{1/2}/l^{1/2}{\cdot}h$ were obtained, respectively; and using 200 g of sulfur particles showed the highest nitrate removal rates. For different sulfur particle sizes ranging from small (0.85-2.0 mm), medium (2.0-4.0 mm), and large (4.0-4.75 mm), reaction rate constants of 31.56, 10.88, and $6.23mg^{1/2}/l^{1/2}{\cdot}h$ were calculated. The fastest nitrate removal rate was observed for the smallest particle size. Addition of chemical oxygen demand (COD), methanol as the external carbon source, with the autotrophic denitrification in sufficiently alkaline conditions, created a balance between heterotrophic denitrification (which raises the pH) and sulfur-utilizing autotrophic denitrification, which lowers the pH.

• Carbon letters
• /
• v.3 no.4
• /
• pp.187-191
• /
• 2002

In the present research, we prepared the activated carbon (AC) sorbents to remove gas-phase mercury. The mercury adsorption of virgin AC, chemically treated AC and fly ash was performed. Sulfur impregnated and sulfuric acid impregnated ACs were used as the chemically treated ACs. A simulated flue gas was made of SOx, NOx and mercury vapor in nitrogen balance. A reduced mercury adsorption capacity was obtained with the simulated gas as compared with that containing only mercury vapor in nitrogen. With the simulated gas, the sulfuric acid treated AC showed the highest performance, but it might have the problem of corrosion due to the emission of sulfuric acid. It was also found that the high sulfur impregnated AC also released a portion of sulfur at $140^{\circ}C$. Thus, it was concluded that the low sulfur impregnated AC was suitable for the treatment of flue gas in terms of stability and efficiency.

• Journal of Nutrition and Health
• /
• v.37 no.2
• /
• pp.100-107
• /
• 2004

This study was performed to evaluate the effect of dietary protein source and sulfur amino acid content on bone metabolism in ra. Thirty male rats (body weight 145$\pm$2g) were divided into three groups. The rats in the first group were fed on casein 20% diet as animal protein source and those in the second group were fed on soy 20% diet as plant protein source. Sulfur amino acid ratio of these group was 1.07:1. The rats in the third group were fed on soy 20% diet and the sulfur amino acid were supplemented with the amount contained as much in the soy 20% diet. All rats were fed on experimental diet and deionized water ad libitum for 9 weeks, The total body, spine, femur bone mineral density and bone mineral content were measured using Dual Energy X-ray Absorptiometry Calcium, phosphate, pyridinoline, creatinine in urine and calcium, phosphate, alkaline phosphatase, osteocalcin in serum were measured. During the experimental period, plant protein (soy protein) group had a lower urinary Ca excretion, urine pyridinoline ＆ crosslinks value and had a higher Ca efficiency in total bone and femur bone mineral density than animal protein (casein) group. There were no significant differences in serum calcium, phosphate, alkaline phosphatase and osteocalcin among the three groups of the rats. The findings from this study demonstrated that plant protein (soy protein) is beneficial of bone mineral density because it had a higher Ca efficiency in total bone and femur bone mineral density than animal protein (casein). However, the supplementation of sulfur amino acid on soy results were consistent with prior studies that dietary sulfur amino acid load had a negative effect on calcium balance. The rats fed sulfur amino acid supplementation diet increased urinary calcium excretion and decreased calcium efficiency for total and femur mineral density. Therefore, dietary protein source and sulfur amino acid content influence bone metabolism. (Korean J Nutrition 37(2): 100-107, 2004)

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1777-1787
• /
• 2000

The purpose of this study was to select an effective and economical alkali source for sulfur-utilizing autotrophic denitrification. Tests on acid neutralization and denitrification at various alkali/sulfur mixing ratios were performed for charcoal, briquette ashes, sea shell, and limestone. The results of the experiments showed that sea shell was the most effective alkali source because it could provide more surface area than limestone, and the optimal alkali/sulfur mixing ratio was 1/1(V/V). In a sulfur/sea shell packed bed reactor, the denitrification efficiency was above 90% up to a loading rate of 116 g $NO_3{^-}-N/m^3-day$. but the denitrification efficiency deteriorated to 48% at the loading rate of 145 g $NO_3{^-}-N/m^3-day$. The average $SO_4{^{2-}}$ generation per g of $NO_3{^-}-N$ removed was 7.02 g, which is lower than the theoretical value of 7.54 g. Denitrification and sulfate generation appeared to be a first-order and a zero-order reaction with a reaction rate constant of 0.146 /hr and -53.1 mg/L-hr, respectively. According to nitrogen mass balance, 71~109%, with an average of 90%, of the removed nitrogen was recovered as $N_2$ gas.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.855-861
• /
• 2013

Small-pore Cu-chabazite SCR catalysts with high NOx conversion at low temperatures are of interest for marine diesel engines with exhaust temperatures in the range of 150 to $300^{\circ}C$. Unfortunately, fuels for marine diesel engines can contain a high level of sulfur of up to 1.5% by volume, which corresponds to a $SO_2$ level of 500 ppm in the exhaust gases for an engine operating with an A/F ratio of 50:1. This high level of $SO_2$ in the exhaust may have detrimental effects on the NOx performance of the Cu-chabazite SCR catalysts. In the present study, a bench-flow reactor is used to investigate the effects of sulfur poisoning on the NOx performance of Cu-chabazite SCR catalysts. The SCR catalysts were exposed to simulated diesel exhaust gas stream consisted of 500 ppm $SO_2$, 5% $CO_2$, 14% $O_2$, 5% $H_2O$ with $N_2$ as the balance gas at 150, 200, 250 and $300^{\circ}C$ for 2 hours at a GHSV of 30,000 $h^{-1}$. After sulfur poisoning the low-temperature NOx performance of the SCR catalyst is evaluated over a temperature range of 150-$300^{\circ}C$ to determine the extent of the catalyst deactivation. Desulfation is also carried out at 600 and $700^{\circ}C$ for 30 minutes to determine whether it is possible to recover the NOx performance of the sulfur-poisoned SCR Catalysts.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.296-300
• /
• 2007

This paper presents applicability of photocatalytic decomposition of methyl mercaptan using $TiO_2$. A quartz reactor was used in order to elucidate reaction pathway in photocatalytic decomposition of methyl mercaptan. Experimental results showed that more than 99.9% of methyl mercaptan was decomposed within 30 minutes. It was found that the photocatalytic decomposition of methyl mercaptan followed pseudo first order and its reaction coefficient was $0.05min^{-1}$ During 30 minutes in the photocatalytic reaction, the concentration of methyl mercaptan, dimethyl disulfide, $SO_2$, $H_2SO_4$, COS, $H_2S$ were determined. These results showed that 64% of methyl mercaptan were compensated for the increase in sulfur after 30 minutes through the mineralization. The proposed main photocatalytic decomposition pathway of methyl mercaptan was methyl $mercaptan{\rightarrow}dimethyl$ $disulfide{\rightarrow}SO_2{\rightarrow}H_2SO_4$.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.831-840
• /
• 2009

In order to evaluate the start-up behavior and to identify, through abnormal operation occurrences, the transient behaviors of the Sulfur Iodine(SI) process, which is a nuclear hydrogen process that is coupled to a Very High Temperature Gas Cooled Reactor (VHTR) through an Intermediate Heat Exchanger (IHX), a dynamic simulation of the process is necessary. Perturbation of the flow rate or temperature in the inlet streams may result in various transient states. An understanding of the dynamic behavior due to these factors is able to support the conceptual design of the secondary helium loop system associated with a hydrogen production plant. Based on the mass and energy balance sheets of an electrodialysis-embedded SI process equivalent to a 200 $MW_{th}$ VHTR and a considerable thermal pathway between the SI process and the VHTR system, a dynamic simulation of the SI process was carried out for a sulfuric acid decomposition process (Second Section) that is composed of a sulfuric acid vaporizer, a sulfuric acid decomposer, and a sulfur trioxide decomposer. The dynamic behaviors of these integrated reactors according to several anticipated scenarios are evaluated and the dominant and mild factors are observed. As for the results of the simulation, all the reactors in the sulfuric acid decomposition process approach a steady state at the same time. Temperature control of the inlet helium is strictly required rather than the flow rate control of the inlet helium to keep the steady state condition in the Second Section. On the other hand, it was revealed that the changes of the inlet helium operation conditions make a great impact on the performances of $SO_3$ and $H_2SO_4$ decomposers, but no effect on the performance of the $H_2SO_4$ vaporizer.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.337-343
• /
• 2007

The reforming catalyst and the electrodes in fuel cells can be poisoned by the organic sulfur compound which is added as an odorant for checking out the leakage of natural gas, and that makes a big problem of system degradation. In this study, various adsorbents, such as silica, ${\gamma}$-alumina, activated carbon, HZSM-5, Ultra-stable Y zeolite (USY), and beta zeolite (BEA), were utilized to remove tetra-hydrothiophene (THT) and tert-butylmercaptan (TBM), and to confirm the performance in the adsorption of those odorants by using a continuous adsorptive bed. The effects of Si/Al ratio of zeolites, adsorption temperature and the type of balance gas (methane or He) on the adsorption performance in the packed bed have been investigated. In addition, the competitive adsorption between TBM and THT on the adsorbents was also estimated. The result shows that H-type BEA zeolite exhibited the highest adsorption capacity for TBM and THT odorant, and the higher amount of THT was removed adsorptively on the same adsorbent than TBM. The physical and chemical adsorption of those compounds on acid sites of zeolite were confirmed by temperature programmed desorption (TPD) and infrared spectrum (IR) analyses.