• 상하수도학회지
• /
• 제28권2호
• /
• pp.207-215
• /
• 2014

Wastewater containing heavy metals such as copper (Cu) and nickel (Ni) is harmful to humans and the environment due to its high toxicity. Crystallization in a fluidized bed reactor (FBR) has recently received significant attention for heavy metal removal and recovery. It is necessary to find optimum reaction conditions to enhance crystallization efficacy. In this study, the effects of crystallization reagent and pH were investigated to maximize crystallization efficacy of Cu-S and Ni-S in a FBR. CaS and $Na_2S{\cdot}9H_2O$ were used as crystallization reagent, and pH were varied in the range of 1 to 7. Additionally, each optimum crystallization condition for Cu and Ni were sequentially employed in two FBRs for their selective removal from the mixture of Cu and Ni. As major results, the crystallization of Cu was most effective in the range of pH 1-2 for both CaS and $Na_2S{\cdot}9H_2O$ reagents. At pH 1, Cu was completely removed within five minutes. Ni showed a superior reactivity with S in $Na_2S{\cdot}9H_2O$ compared to that in CaS at pH 7. When applying each optimum crystallization condition sequentially, only Cu was firstly crystallized at pH 1 with CaS, and then, in the second FBR, the residual Ni was completely removed at pH 7 with $Na_2S{\cdot}9H_2O$. Each crystal recovered from two different FBRs was mainly composed of CuxSy and NiS, respectively. Our results revealed that Cu and Ni can be selectively recovered as reusable resources from the mixture by controlling pH and choosing crystallization reagent accordingly.

• Carbon letters
• /
• 제13권4호
• /
• pp.221-225
• /
• 2012

Graphite oxide (GO) was produced using the modified Hummer's method. Poly(p-phenylene sulfide) (PPS)/reduced graphite oxide (RGO) composites were prepared by in situ polymerization method. The electrical conductivity of the PPS/RGO composites was no more than 82 S/m. It was found that as GO content increased in the PPS/RGO composites, the crystallization temperature and electrical conductivity of the composites increased and the percolation threshold value was at 5-8 wt% of GO content.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.292-295
• /
• 2001

A Study on the precipitation characteristics of nickel hydroxide as well as carbonate and sulfide is carried out to determine the proper treatment condition of the wastewater induced from nickel-plating industry. The nickel concentrations in the effluent could be kept lower than 5ppm when the value of pH was maintained higher than 10. The precipitation of nickel salts by alkaline addition to the nickel containing model wastewater was conducted by using proper amount of sodium hydroxide, sodium carbonate, sodium bicarbonate and sodium sulfide. In case of the sulfide treatment, the residual nickel concentration in the clear water after precipitates removed showed the lowest value. The influences of the precipitation condition upon the particle size of the crystals precipitated were also investigated. In spite of the various precipitation conditions were adopted, the particle size of the precipitated crystals showed no great differences. The sedimentation rates of the precipitated particle bed were observed and the free sedimentation period was terminated within 20 minutes. Although the hindered sedimentation as well as bed compaction progressed subsequently, the bed heights were maintained almost the same level after two hours of sedimentation.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.781-786
• /
• 2000

An Er-doped sulfide fiber was drawn, and its spectroscopic properties were analyzed. Compositions of a 1000 ppmwt Er3+-doped core and an undoped clad were Ge30-Ga1-Asg-S61 and Ge30-As8-S62, in at.%, respectively. Refractive index of the core composition was approximately 0.01 high than that of the clad. In order to enhance the mechanical stability as well as to prevent infiltration of impurity ions such as OH-, an UV-curable polymer was used for the coating. The optical loss of a fiber formed directly from a polymer coated core rod without cladding was ∼15 dB/m at 1.06$\mu\textrm{m}$. In the case of a fiber with core/clad structure, the optical loss was so high that the stimulated emission of erbium fluorescence was not evident. It is believed that presence of inhomogeneous core/clad interface and crystalline aggregates precipitated in the clad region were responsible for the high optical loss. On the other hand, fluorescence characteristics of Er3+ embedded in the core region were more or loss deteriorate compared to fiber preform, which is attributed to the redistribution of the Er ions along with the partial crystallization of the core glass during the fiberization process.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.35-58
• /
• 2000

The demand for sub-micrometer or nanometer functional ceramic powders with a better suspension behavior in aqueous media in increasing. Redispersible barium titanate (BT) nanocrystals, green light emitting Mn2+ doped Zn$_2$SiO$_4$ and ZnS nanoparticle phosphors were synthesized by a hydrothermal method or chemical precipitation with surface modification. The nanoparticle redispersibility for BT was achieved by using a polymeric surfactant. X-ray diffraction(XRD) results indicated that the BT particles are of cubic phase with 80 nm in size. XRD results of zinc silicate phosphor indicate that seeds play an important role in enhancing the nucleation and crystallization of Zn$_2$SiO$_4$ crystals in a hydrothermal condition. This paper describes and discuss the methods of surface modification, and the resulting related properties for BT, zinc silicate and zinc sulfide.

• 자원환경지질
• /
• 제36권3호
• /
• pp.177-189
• /
• 2003

서보광산의 폐광석에 대한 황화광물의 산화작용과 용해된 금속이온들의 이동을 제한하는 메카니즘을 밝히고자 광물학적 연구를 수행하였다. 광물학적 연구를 위해서 반사현미경 관찰, XRD 분석, SEM/EDS 분석을 실시하였다. 폐광석에 대한 광물학적 연구를 통해 앵글레사이트(anglesite), 코벨라이트(covellite), 침철석(goethite), 자연황(native sulfur), 엔소타이트(nsutite) 등의 2차광물을 확인하였으며, 이들 2차광물은 용해된 비소, 구리, 철, 망간, 납, 아연의 확산을 제어한다. 용해된 비소, 구리, 철, 망간, 납, 아연은 철수산화광물과 망간수산화광물에 흡착되거나 공침되기도 한다. 철수산화광물은 결정도가 낮은 것과 높은 것(침철석)으로 분류된다. 비소는 결정도가 낮은 철수산화광물에서 9∼24 wt.%가 검출되며, 결정도가 더 높은 철수산화광물(침철석 등)에서는 상대적으로 낮은 함량(0.6∼7.7wt.%)이 검출되었다. 이것은 결정도가 낮은 철수산화광물에 흡착되었던 비소가 철수산화광물의 결정도가 높아지면서 비소를 방출하기 때문이거나 비표면적의 차이에 기인한 것으로 해석된다. 폐광석으로부터 용해된 중금속과 미량금속원소들은 침전(Fe, Mn, Cu, Pb), 공침(Fe, Mn) 및 흡착(As, Cu, Pb, Zn) 등의 화학반응을 통하여 다시 고정화됨으로써, 현장에서 자연적으로 정화되고 있다. 이러한 광물학적 연구결과들은 광산 폐기물의 지화학적 환경 영향평가에 이용할 수 있고, 가능한 광산복원 계획을 세우는 데 유용한 자료로 사용될 수 있다.

• 자원환경지질
• /
• 제19권2호
• /
• pp.133-146
• /
• 1986

Primary uraninite and secondary uranium minerals such as torbernite, metatorbernite, tyuyamunite, metatyuyamunite, autunite and metaautunite have been identified from various types of uranium ores. Uranium minerals occur as accessory minerals in both the primary and secondary ores. Low·grade uranium ores consist of various kinds of primary and secondary minerals. Major constituent minerals of primary uranium ores are graphite. quartz. Ba-feldspar and sericite/muscovite, and accessories are calcite, chlorite, fluorapatite, barite, diopside, sphene, rutile, biotite, laumontite, heulandite, pyrite, sphalerite and chalcopyrite, and secondary minerals consist of kaolinite, gypsum and goethite. Uraninite grains occur as microscopic very fine-grained anhedral to euhedral disseminated particles in the graphitic matrix, showing well·stratified or zonal distribution of uranium on auto-radiographs of low-grade uranium ores. Some uraninite grains are closely associated with very fine-grained pyrite aggregates, showing an elliptical form parallel to the schistosity. Some uraninite grains include extremely fine-grained pyrite particle. Sphalerite and pyrite are often associated with uraninite in graphite-fluorapatite nodule. The size of uraninite is $2{\mu}m$ to $20{\mu}m$ in diameter. Low-grade uranium ores are classified into 5 types on the basis of geometrical pattern of mineralization. They are massive, banded, nodular, quartz or sulfide veinlet-rich and cavity filling types. Well-developed alternation of uranium-rich and uranium-poor layers, concentric distribution of uranium in graphite-fluorapatite nodule and geopetal fabrics due to the load cast of the nodule suggest that the uranium was originally deposited syngenetically. Uraninite crystals might have been formed from organo-uranium complex during diagenesis and recrystallized by metamorphism. Secondary uranium minerals such as torbernite, tyuyamunite and autunite have been formed by supergene leaching of primary ores and subsequent crystallization in cavities.

• 자원환경지질
• /
• 제25권1호
• /
• pp.51-60
• /
• 1992

The pluton rocks in Kwangyang-Seungju area consist of two mica granite, hornblende diorite, Rimunri quartz diorite, grnodiorite porphyry and granophyre. The analysis of the geochronological data by the methods of K-Ar for the hornblende from Rimunri quartz diorite and hornblende diorite show that the ages are found to be $86{\pm}3.3$ Ma and $108{\pm}4$ Ma, respectively, and K-Ar age for chlorite from the altered two mica granite which intruded by the hornblende diorite of the Bonjeong mine shows $108{\pm}4$ Ma; K-Ar age for sericite from the greisenized hornblende diorite, which is closely associated with the Bonjeong ore deposits, is dated as $94.2{\pm}2.4$ Ma. They correspond to the igneous activity of the Bulgugsa Disturbance periods in the area. In chemical feature for oxides versus silica and AFM triagular diagrams of the pluton rocks in the study area, there is a suggestion of the possibility that these rock facies area a Calc-alkali series of differentiated products by low-pressure crystal fractionation processes in $SiO_2$-undersaturated suites. Compared with hornblende diorite, andesite and granodiorite porphyry, two mica granite, Rimunri quartz diorite and granophyre exhibit a wider range of normalized REE abundance and negative Eu anomalies. Such anomalies imply more extensive feldspar fractionation during crystallization. The Rimunri quartz diorite and hornblende diorite occurring in the margin of four mines(Bonjeong, Okdong, Soungchei and Saungyeul) of this area have high contents of As, Sb, Cu and Zn which have been shown as the best indicators in hypogene gold deposits and low contents of Ba, Cr served as more sensitive indicators. And the granitoids are regarded as the rocks associated with gold and sulfide mineralization of the area.

• 자원환경지질
• /
• 제2권1호
• /
• pp.1-12
• /
• 1969

In the Sangdong Mine area, Taebaegsan series (Pre-Cambrian) and Chosun System (Cambro-ordovician) are widely distributed. The Chosun System consists of Yangdug Series (Jangsan Quartzite and Myobong Slate) and The Great Limestone Series (Pungchon Limestone, Shesong Shale, Hwajeol Formation and Dongjeom Quartzite). The mineralized zone containing the main ore body of the Sangdong Mine was developed in the Myobong Slate formation. The result of the field and microscopic study on the mineral paragenesis and it's wall rock alteration in the tungsten ore deposit shows the following features. The orogenic movements of the Post-Chosun System in the Hambaeg Geosyncline are closely related to the tungsten ore deposition in the area, the ore minerals are composed mainly of scheelite, powelite molybdenite and sulfide minerals, and gangue minerals are hornblende, diopside, garnet, quartz, phlogopite, tremolite, biotite, muscovite, fluorite, etc., main ore body was enriched by scheelite bearing quartz vein filling into interstices of formerly mineralized zones, and the minor faults, faults of N $60^{\circ}-70^{\circ}W$, $45^{\circ}-60^{\circ}NE$ and joints, which were formed at the end of the mineralization and the slate. Country rock of the ore body was altered into the following several zones from the outside to the inside; lowgrade recrystalline aureole, silicified sericite zone, and diopside-hornblende zone. Under the microscopic observation of 195 samples taken from throughout ore body can be classified into 10 different groups by their mineral paragenesis as shown in table 2. The garnet-diopside group is primary skarn and it shows gradational change to the groups of later stage by the successive processes of metasomatism. From the stage of quartz-bearing group, the dissemination of scheelite is seen. The crystallization of scheelite in the bed started with the quartz deposition and continued to the last stage when quartz vein intruded into the main ore body. In the field and the under ground investigation a durable limestone bed in thickeness about 20 meters and their remnants in ore body are observed and under microscope calcite remnants are recognized. Hence it is posturated that the ore material moved up through the faults, shear zones or feather cracks and was assimilated with the interbeded limestone, after that the body was affected by the successive differentiated ore solution by gradational increasing in $SiO_2$, $K_2O$ and $H_2O$. Evidently this ore deposit shows the features resulted from pyrometasomatic processes.

• 암석학회지
• /
• 제11권3_4호
• /
• pp.259-270
• /
• 2002

경상남도 일광지역의 각력파이프형 구리(Cu)광상은 화강암질암 성분의 암주내에 배태되어 있으며, 모암인 화강암질암은 변질되어 있다. 암흑색의 전기석은 각력파이프를 중심으로 교대 후광을 형성하면서, 석영, 황동석, 유비철석, 자류철석, 방연석, 반동석등과 함께 각력파이프내의 모암인 화강암질암 각력들사이의 기질부를 충전하면서 광맥을 형성하거나, 모암인 장석, 흑운모를 치환교대하면서 산출된다. 각력내(광맥)에서 형성된 전기석은 조립에서 세립질의 자형으로, 침상 내지 깃털 모양으로 산출되며, 다색성 체계는 대체로 짙은 청색과 녹색을 나타낸다. 변질된 모암에서 산출되는 전기석은 타형이며, 등립질의 이차 (secondary) 석영과 함께 방사상의 연정을 이루는 것이 특징적으로 관찰된다. 전기석은 Fe성분이 풍부한, 흑색의 스코올(schorl)(80mol% schorl relative)이며, 비교적 단순한 화학조성을 갖는다. 전기석의 누대구조에 따른 조성 변화는 전기석결정 후기단계에 Fe와 Ca 성분이 증가했음을 나타낸다. 이러한 화학성분의 변화는 Ca에 의한 Na치환, Fe$^{3+}$ 에 의해 Al이 치환되어진 우바이트(uvite)치환(Ca(Fe,Mg)NaAl$_{-1}$)과 페리스코올(ferrischorl)치환 (Fe$^{3+}$ Al$_{-1}$)에 의한 것으로 해석된다. 페리스코올치환이 있었다는 것은 전기석을 침전시킨 열수의 산화상태(oxidation state)가 높아진 것을 반영한다. 이러한 높아진 산화환경은 열수의 비등에 의해 H$_2$ 성분이 열수에서 제거되어져 형성되어졌다. 또한 열수의 비등에 의한 산성(acidic) 휘발성성분 제거는 열수의 pH를 높여 경제성 있는 황화광물의 형성을 용이하게 했다 일광전기석의 산출상태와 지구화학적 특성은 이곳의 전기석은 마그마에서 용리되어진 열수가 각력파이프를 통해 대규모로 이동되어 형성된 생산물이며, 마그마에서 산성성분의 유체가 용리되어 산성열수체계를 형성하고 난 후, 전기석의 침전이 시작되었음을 보여준다 광화대와 변질대를 형성한 일광의 열수체계는 마그마(orthomagmatic), 심부(hypogene) 기원의 열수에 의해 형성되어졌음을 나타낸다.