• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.724-730
• /
• 2017

SpaceWire invented for spacecrafts has Time-Code defined for time synchronization over SpaceWire network. A Time-Code suffers transmission delay of 14[bit-period] and jitter up to 10[bit-period] whenever it passes through a SpaceWire link, which is the primary cause of time synchronization error. This work presents a simple method to improve the time synchronization which uses two extended Time-Codes. Nodes on a SpaceWire network can find how much delay and jitter a received Time-Code has suffered while it passes through the network, and they can correct time synchronization error with this information. The proposed method was validated in a simulation environment developed based on OMNeT++. The simulation result showed that time synchronization error less than a few bit-periods can be achieved. The proposed method is cost effective and suitable for small-scale SpaceWire network systems.

• KIISE Transactions on Computing Practices
• /
• v.21 no.3
• /
• pp.239-246
• /
• 2015

QR(Quick Response) Code has been developed to provide greater storage capacity and more functionality compared to 1D bar codes. With the emergence of increasingly mobile devices equipped with cameras such as smart-phones and tablets, QR codes have become very popular and more important in mobile businesses. Typically, most QR codes are used as a URL link for redirecting users to webpages. However, the URL based QR codes are required to be connected over the internet and to be run a server. This can incur unnecessary traffics in the Internet. Furthermore, it is not suitable for the country lagging behind others in its network infrastructure. In this paper, we propose a server-less ${\mu}$-webpage to provide mobile web services and be optimized for the capabilities and limitations of QR Code. We have implemented the ${\mu}$-webpage in Android, and the results showed that the proposed mechanism can provide web-services without requiring extra servers or incurring mobile traffic data compared to the URL-based QR Codes.

• Journal of Arbitration Studies
• /
• v.13 no.2
• /
• pp.291-319
• /
• 2004

The seller may take a warranty with respect to the goods. If they are not as warranted, they may be held liable for the breach of warranty. Even when they has not made a warranty, the law will in some instances hold them responsible as though they had made a warranty. An express warranty is a part the basis for the sale. That is, the buyer has purchased the goods on the reasonable assumption that they were as stated by the seller. When the buyer intends to use the goods for a particular or usual purpose, as contrasted with the ordinary use for which they are customarily sold, the seller makes an implied warranty that the goods will be fit for the purpose when the buyer relies on the seller's skill or judgment to select or furnish suitable goods, and when the seller at the time of contracting knows or has reason to know the buyer's particular purpose and his reliance on the seller's judgment. A merchant seller who makes a sale of goods in which he customarily deals makes an implied warranty of merchantability. The Uniform Commercial Code expressly abolishes the requirement a privies to a limited extent by permitting a suit for breach of warranty to be brought against the seller by members of the buyer's family, his household, and his guests, with respect to personal injury sustained by them. Apart from the express provision made by the Code, there is a conflict of authority as to whether privies of contract is required in other cases, with the trend being toward the abolition of that requirement. At common law the rule was that only the parties to a transaction had my rights relating to it. Accordingly, the buyer could sue his immediate seller for breach of warranties. The rule was stated in the terms that there could be no suit for breach of warranty unless there was a privies of contract. The code expressly abolishes the requirement of privies to a limited extent by permitting a suit for breach of warranty to be bought against the seller by members of the buyer. Apart from the express provision made by the Code, there is a conflict of authority as to whether privies of contract is required in other cases, with the trend being toward the abolition of that requirement.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.1
• /
• pp.23-29
• /
• 2008

Two high resolution compressive schemes, CICSAM(Ubbink, 1997) and HRIC(Muzaferija & Peric, 1999), in interface capturing method are reviewed briefly with respect to the extended forms suitable for unstructured meshes. And then those are applied to three typical test cases of translation test, shearing flow test and collapsing water problem with an obstacle. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method, which is based on the finite-volume technique and fully conservative. The calculated results show that CICSAM is better than HRIC with respect to accuracy and robustness, although either scheme can be used as a good choice for free surface or two-phase flow simulation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.441-444
• /
• 1999

The crack width of concrete structures subjected to shrinkage depend on a great number of parameters whose effects are restrain condition, the number and spacing of crack and the amounts of reinforcements. Through suitable reinforcement it is possible to make the individual cracks exceedigly small. This paper is to present the amount of reasonable reinforcement for crack control through a rational analysis of forces occuring in significantly restrained concrete structures due to the shrinkage. Also the analysis results from this paper are compared with the provisions for shrinkage and temperture reinforcement in the KCI concrete strucural design code.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.57-61
• /
• 1997

A Canadian Deuterium Uranium (CANDU) reactor core calculation was performed using lattice parameters generated by HELIOS. The HELIOS-based lattice parameters were processed by TABGEN in a form suitable for the core analysis code RFSP. The core calculation was performed and the results were compared to those of the reference calculation which uses POWDERPUFS-V (PPV) for the lattice parameter generation. The characteristics of the core calculated based on the PPV and HELIOS lattice parameters match within 0.4%$\Delta$k and 7% for the excess reactivity and the channel power distribution, respectively.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.285-288
• /
• 2000

In this paper, we propose a Reed-Solomon decoder for the DVD Reed-Solomon(RS) product code based on new efficient euclid cell architecture suitable for Modified Euclid Algorithm. We synthesized the RS decoder using Hyundai 0.65um CMOS standard cell library and compared the performance of the decoder with one of the conventional architectures. The result shows that the proposed euclid cell use about 32% less symbol time.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.553-556
• /
• 2003

In this paper was studied the improvements and increasements of the data transmission rate in UWB (Ultra wideband) systems. so Considered that previous UWB systems of code structure and proposed the New constructure that was synthesized the PPM and Bi-Phase Modulation structure, may increase the data transmission rate of multiple channel structure using Time-slots. This proposed structure was modeled suitable at Home Networking conditions and was simulated. and so measure the performance of coding construction, and compare that New synthesized structure with early structure. so we can verify the superiority of New experiment.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.165-167
• /
• 1988

In this paper, the design of decoder for R-S code using discrete finite-field Fourier transform is presented. An important ingredient of this design is a modified Euclid algorithm for computing the error-locator polynomial. The computation of inverse elements is completely avoided in this modification of Euclid algorithm. This decoder is regular and simple, and naturally suitable for VLSI implementation.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.165-166
• /
• 2007

This paper proposes an algorithm to improve the anti-theft function of the CAR_AV using the CAN(Controller Area Network) communication between CAR AV and cluster. Compare to the typical anti-theft algorithms like security code entering, the proposed one is more secure in most cases. The proposed algorithm is suitable for the recent automobile that employ the CAN network as the communication channel between their devices.