• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.51-58
• /
• 2002

The conventional code division multiple access(CDMA) detector shows severe degradation in communication quality as the number of users increases due to multiple access interferences(MAI). This problem thus restricts the user capacity. Various multiuser detection algorithms have been proposed to overcome the MAI problem. The existing detectors can be generally classified into one of the two categories : linear multiuser detection and subtractive interference cancellation detectors. In the linear multiuser detection, a linear transform is applied to the soft outputs of the conventional detector. In the subtractive interference cancellation detection, estimates of the interference are generated and subtracted out from the received signal. There has been great interest in the family of the subtractive interference cancellation detection because the linear multiuser detection exhibits the disadvantage of taking matrix inversion operations. The successive interference cancellation (SIC) and the parallel interference cancellation (PIC) are the two most popular structures in the subtractive interference cancellation detector. The SIC structure is very simple in hardware complexity, but has the disadvantage of increased processing delay time, while the PIC structure is good in performance, but shows the disadvantage of increased hardware complexity. In this paper we propose a mixed structure form of SIC and PIC in order to achieve good performance as well as simple hardware complexity. A performance analysis of the proposed scheme has been made, and the superior characteristics of the mixed structure are demonstrated by extensive computer simulations. 

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.13-22
• /
• 2002

To identify the differentially expressed genes at growth stage of Hanwoo, we constructed the subtractive cDNA library from loin mRNA of 12- and 24-month old Hanwoo by PCR-based subtraction. The fourteen genes were confirmed by sequencing and reverse northern blot analysis, and they were selected as candidate of putative genes differentially expressed at the growth stage of Hanwoo. Three subtracted cDNA fragments that expressed specific signal to cDNA probe for 6-month-old loin of Hanwoo were highly homologous to those of the genes encoding EPV 20, Ca2＋ATPase, and TCTP, respectively. The nine cDNA clones showed intense signal to cDNA probe from 12-month-old loin of Hanwoo, and highly homologus to those of genes encoding VCP, HSP 70, aldolase A, MSSK1, GM-2 activator protein, ryanodine receptor, acidic ribosomal phosphoprotein p1, ADP/ATP translocase, and UCP 2, respectively. Two subtracted cDNA clones that expressed specific signal to cDNA probes for 12- and 24-month-old loin of Hanwoo were detected. One of them was highly homologus to the gene encoding ferrochelatase and the other was highly homologus to the gene encoding ADRP.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.812-815
• /
• 2007

To apply the superconducting fault current limiter(SFCL) into a power system, the analysis for its recovery characteristics as well as the consideration for its cooperation with other protecting machine such as a circuit breaker is required. The recovery characteristics of the flux-lock type SFCL like its current limiting characteristics are dependent on the winding direction of two coils. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. From the analysis on the experimental results due to the winding direction of two coils, the limited fault current in case of the additive polarity winding was observed to be lower than that for the case of the subtractive polarity winding. In addition, the recovery time was found to be faster in case of the additive polarity winding compared to the subtractive polarity winding.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.617-619
• /
• 2004

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time in. Today any data storage system can not satisfy these conditions, but holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System architecture without mechanical actuating part is possible, so fast data transfer rate and high storage capacity about $1Tb/cm^3$ can be realized. In this paper, to correct errors of binary data stored in holographic digital data storage system, find cluster centers using subtractive clustering and reduce intensities of pixels around centers, so the intensify profile of data rare will be uniform and the better data storage system can be realized.

• BMB Reports
• /
• v.40 no.2
• /
• pp.286-289
• /
• 2007

Despite considerable interest in the biologic processes of regeneration and stem cell activation, little is known about the genes involved in these transformative events. In a Hydra littoralis model of regeneration, we employed a rapid shotgun suppression subtractive hybridization strategy to identify genes that are uniquely expressed in regenerating tissue. With an adaptor-PCR based technique, 16 candidate transcripts were identified, 15 were confirmed unique to mRNA isolated from hydra undergoing regeneration. Of these, 6 were undescribed in GenBank and allied expressed sequence tag (EST) databases (GenBank + EMBL + DDBJ + PDB and the Hydra EST database). BLAST analysis of these sequences identified remarkably similar sequences in anonymous ESTs found in a wide variety of animal species.

• Journal of fish pathology
• /
• v.19 no.3
• /
• pp.189-195
• /
• 2006

A subtracted cDNA library of a marine scuticociliate, Philasterides dicentrarchii, in response to 17β-estradiol exposure was constructed using suppression subtractive hybridization (SSH). As a result of SSH, 275 clones were isolated, and among them, only glutathione peroxidase (GPX) gene was isolated as an antioxidative enzyme responding to 17β-estradiol. The semi-quantitative reverse-transcriptase polymerase chain reaction (RT-PCR) analysis revealed that the transcription of GPX gene of P. dicentrarchii was clearly increased by exposure to 17β-estradiol. The GPX transcription was also clearly increased by exposure to xenoestrogens such as bisphenol A (BPA) and genistein.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1835-1841
• /
• 2017

An improved single-phase full-bridge zero-voltage-switching inverter using a subtractive coupled magnetics is proposed in this paper. The proposed topology overcomes several drawbacks of the conventional ARCPI zero-voltage-switching inverter including two bulky capacitors which can cause problems such as the need for a protection circuit and voltage fluctuation of split capacitors. Also the proposed topology can reduce the number of devices required for ZVS through a simplified auxiliary circuit, thus achieving low cost and small volume and is applicable a modified unipolar PWM scheme. Detail mode analysis and design considerations are provided for optimal efficiency. In the end, the effectiveness and feasibility of the proposed topology are verified experimentally under various conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1076-1079
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time in. Today any data storage system can not satisfy these conditions, but holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System architecture without mechanical actuating part is possible, so fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this paper, to correct errors of binary data stored in holographic digital data storage system, find cluster centers using clustering algorithm and reduce intensities of pixels around centers. We archive the procedure by two algorithms of C-mean and subtractive clustering, and compare the results of the two algorithms. By using proper clustering algorithm, the intensity profile of data page will be uniform and the better data storage system can be realized.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.44-47
• /
• 2017

In this paper, the current limiting characteristics of the transformer type superconducting fault current limiter (SFCL) with the two coupled secondary windings due to its winding direction were analyzed. To analyze the dependence of transient fault current limiting characteristics on the winding direction of the additional secondary winding, the fault current limiting tests of the SFCL with an additional secondary winding, wound as subtractive polarity winding and additive polarity winding, were carried out. The time interval of quench occurrence between two superconducting elements comprising the transformer type SFCL with the additional secondary winding was confirmed to be affected by the winding direction of the additional secondary winding. In case of the subtractive polarity winding of the additional secondary winding, the time interval of the quench occurrence in two superconducting elements was shorter than the case of the additive polarity winding.