• The Korean Journal of Mycology
• /
• v.36 no.2
• /
• pp.163-171
• /
• 2008

We have surveyed the variation of physical and chemical characteristics of aerobic and anaerobic outdoor fermentation of cotton wastes using for oyster mushroom cultivation. The inner temperature of cotton wastes fermented aerobically covered with thin cloth and setting pallet at bottom was higher than that of anaerobic fermented cotton wastes covered with P.E vinyl and the maximum temperature was $75^{\circ}C$ at 5th day after fermentation. pH of cotton wastes fermented aerobically was increased up to 8.9 after fermentation of $9{\sim}12$ days, but that of anaerobically fermented was decreased up to 5.0. Total carbon content was decreased but total nitrogen content was increased when fermentation was in progress. Oxygen concentration of cotton wastes fermented aerobically was decreased until 6 days after fermentation but increased after 9 days of fermentation. Ammonia concentration of cotton wastes fermented aerobically and anaerobically was below 10 ppm and $20{\sim}85\;ppm$ respectively. In anaerobic condition the cotton wastes was contaminated with mold ($15{\sim}50%$), where no contamination was found in aerobic condition during spawn running stage. Yields of mushroom grown on cotton wastes aerobically fermented for $6{\sim}9$ days was $23.0{\sim}23.6\;kg$ per $3.3\;m^2$ area.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.6
• /
• pp.547-557
• /
• 1986

The characteristics of the three alkaline proteinases, Enz. A, B and C, from the pyloric caeca of mackerel have been investigated. The optimum condition for the activity of the Enz. A, B and C was pH 9.4, 9.8 and 9.8 at $45^{\circ}C$ for $2\%$ casein solution, and was pH 9.2 10.2 and 9.8 at $45^{\circ}C$ for $5\%$ hemoglobin denatured by urea, respectively. Enz. A, B and C by heat treatment at $50^{\circ}C$ for 5 min were inactivated 90, 33 and $37\%$, respectively, over the original activity. The reaction rate of the three alkaline proteinases was constant to the reaction time to 40 min in the reaction condition of $2{\mu}g/ml$ of enzyme concentration and $2\%$ casein solution. The reaction rate equation and Km value against casein substrate determined by the method of Lineweaver and Burk were: Enz. A, Y=3.6X and $Km=5.0{\times}10^{-3}\%$; Enz. B, Y=6.0X and $Km=1.0{\times}10^{-3}\%$; Enz. C, Y=4.2X and $Km=3.6{\times}10^{-3}\%$. The three alkaline proteinases were inactivated by $Ag^+$ and $Hg^{2+}$, but activated by $Mn^{2+},\;Sn^{2+}\;and\;Pb^{2+}$, Enz. B and C were remarkably inhibited by the soybean trypsin inhibitor. Molecular weight of Enz. A, B and C determined by SDS-polyacrylamide gel electrophoresis and Sephadex G-100 gel filtration was in the range of $27,500{\pm}2,500,\;20,500{\pm}1,500\;and\;15,250{\pm}250$, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.116-122
• /
• 2010

A $Cu_3Si$ film electrode is obtained by Si deposition on a Cu foil using DC magnetron sputtering, which is followed by annealing at $800^{\circ}C$ for 10 h. The Si component in $Cu_3Si$ is inactive for lithiation at ambient temperature. The linear sweep thermammetry (LSTA) and galvano-static charge/discharge cycling, however, consistently illustrate that $Cu_3Si$ becomes active for the conversion-type lithiation reaction at elevated temperatures (> $85^{\circ}C$). The $Cu_3Si$ electrode that is short-circuited with Li metal for one week is converted to a mixture of $Li_{21}Si_5$ and metallic Cu, implying that the Li-Si alloy phase generated at 0.0 V (vs. Li/$Li^+$) at the quasi-equilibrium condition is the most Li-rich $Li_{21}Si_5$. However, the lithiation is not extended to this phase in the constant-current charging (transient or dynamic condition). Upon de-lithiation, the metallic Cu and Si react to be restored back to $Cu_3Si$. The $Cu_3Si$ electrode shows a better cycle performance than an amorphous Si electrode at $120^{\circ}C$, which can be ascribed to the favorable roles provided by the Cu component in $Cu_3Si$. The inactive element (Cu) plays as a buffer against the volume change of Si component, which can minimize the electrode failure by suppressing the detachment of Si from the Cu substrate.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.188-195
• /
• 2021

This study was conducted to investigate the growth and quality characteristics of melon (Cucumis melo L.) cultivars and the irrigation requirements for cultivars. In our previous study in 2019, twelve melon cultivars including 'Dalgona' were examined for their cultivar characteristics under the same irrigation condition for all cultivars, and sorted into several groups based on different growth condition; for the internode length (from 0 to 20th node), leaf area, and fruit weight, 'Kingstar' belonged to the largest group, 'Worldstar' the middle group, and 'Dalgona' the smallest group. After analyzing the results of the previous experiment, 'Dalgona', 'Worldstar', 'Kingstar', and 'Rubyball' were selected as test cultivars for the growth group in 2020, and irrigated according to different irrigation levels for each cultivar. The control of the irrigation volume for each melon cultivar by monitoring the drainage rate during the cultivation periods showed that all four cultivars required a similar amount of irrigation in the 'early growth' stage where crops grew at about the same rate. From 'flowering time', however, the change in irrigation requirements showed a similar tendency for 'Worldstar' and 'Kingstar' and for 'Rubyball' and 'Dalgona' respectively. A sudden change in each irrigation volume was observed from the fruit set; 'Dalgona' began first to decline and 'Rubyball' was second, followed by 'Worldstar' and 'Kingstar'. In conclusion, the irrigation volume was the largest in 'Kingstar', followed by 'Worldstar', 'Rubyball', and 'Dalgona' in the same order as the growing amount of plant length, leaf area, and fruit weight. Therefore, it is necessary to control exactly the irrigation volume by reflecting the unique growth characteristics of each cultivar for the production of high-quality fruit in melon hydroponics, and especially to use great care when different cultivars are cultivated together.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.108-118
• /
• 2021

The purpose of this study was to provide baseline ecological data for the conservation of the Manchurian trout habitat through the investigation of the growth status of Brachymystax lenok tsinlingensis, and Pearson's correlation analysis (PCA) between the B. lenok tsinlingensis population and the use of the land around Gyebangcheon stream. Sampling was conducted twice in July, September, and October 2018. During the July and September surveys, 882 individuals belonging to 13 species from six families were collected. The dominant species was Rhynchocypris kumgangensis and the subdominant species was Zacco koreanus. The total number of B. lenok tsinlingensis collected was 99. The results of the length-weight relationship in the B. lenok tsinlingensis population were analyzed with a regression coefficient b value of 3.1272 and a condition factor (k) value of 0.0006. Therefore, the growth condition of B. lenok tsinlingensis was regarded as fairly good. The QHEI(Qualitative habitat evaluation index) value in the B. lenok tsinlingensis habitat was 119.5(±0.5)-153.5(±0.5), indicating optimal-suboptimal conditions. As a result of the HIS (Habitat suitability index) analysis, it was confirmed that the optimal habitat for B. lenok tsinlingensis was 0.45-0.55m and >1 m in water depth, 0.55-0.65 m s^-1 in water velocity, and boulder in the substrate. The ratio of the land use in this study site was analyzed as 66.26-96.31% for forest and grassland areas, 0.00-23.79% for agricultural areas, 0.00-4.19% for urbanized areas, and 3.69-8.87% for others. Correlation analysis of the number of B. lenok tsinlingensis and various factors revealed statistically significant correlations between QHEI and forest and grassland areas, agricultural areas, and urbanized areas.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1041-1052
• /
• 2022

This study is to estimate the optimal ecological flow and analysis the spatial distribution of fish habitat for Andong dam downstream reach (4,565.7 km²) using PHABSIM (Physical Habiat Simulation System) and River2D. To establish habitat models, the cross-section informations and hydraulic input data were collected uisng the Nakdong river basic plan report. The establishment range of PHABSIM was set up about 410.0 m from Gudam streamflow gauging station (GD) and about 6.0 km including GD for River2D. To select representative fish species and construct HSI (Habitat Suitability Index), the fish survey was performed at Pungji bridge where showed well the physical characteristics of target stream located downstream of GD. As a result of the fish survey, Zacco platypus was showed highly relative abundance resulting in selecting as the representative fish species, and HSI was constructed using physical habitat characteristics of the Zacco platypus. The optimal range of HSI was 0.3~0.5 m/s at the velocity suitability index, 0.4~0.6 m at the depth suitability index, and the substrate was sand to fine gravel. As a result of estimating the optimal ecological flow by applying HSI to PHABSIM, the optimal ecological flow for target stream was 20.0 m³/sec. As a result of analysis two-dimensional spatial analysis of fish habitat using River2D, WUA (Weighted Usable Area) was estimated 107,392.0 m²/1000 m under the ecological flow condition and it showed the fish habitat was secured throughout the target stream compared with Q₃₅₅ condition.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.254-263
• /
• 2007

The objective of this study was to evaluate biological water quality using fish assemblages in Nakdong River watershed. We selected 6 sites along the main axis of the river and evaluated the Index of Biological Integrity (IBI), Qualitative Habitat Evaluation Index (QHEI) and chemical water quality during July 2004${\sim}$March 2006. For the study, we applied the 10 metric IBI model, which was developed for national biological water quality criteria. Nakdong River's IBI value averaged 20.8 (n=14) during the study which means poor biological water quality. Physical habitat health at all sites, based on QHEI model, was measured as 110, indicating fair${\sim}$good condition. The habitat health varied depending on the locations sampled. Habitat health in sites 1 and 6 was judged as good, while the health in sites 3 and 4 was $poor{\sim}fair$. Especially, we found the metric values of $M1{\sim}M5$, M7, M10 were low in sites 3 and 4 compared to other sites. In these sites, thus, habitat restoration of substrate composition, riffles, and bank vegetation may be necessary. In the mean time, chemical water quality, based on BOD, COD, TSS, and nutrients, had no large spatial and temporal variations. Overall data analysis indicated that site 3 was largely impacted by the polluted-tributary, Keumho River and the downstreams showed better water quality due to the dilution of the polluted river water by Nam River and Hwang River.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.3
• /
• pp.27-36
• /
• 2020

This study investigates the changes in inorganic composition and the microbial counts during the process of fermentation of mixed domestic organic resources for the development of alternatives for imported oil cake, and examines the characteristics of mixed fermentation organic fertilizer (MFOF). The effect of the MFOF on the lettuce growth is investigated in order to evaluate the possibility of replacing the existing mixed oil cake with the MFOF. Six kinds of domestic by-product resources, which are rice bran, distiller's dried grains, sesame meal, fish meal, and spent mushroom substrate, are mixed by mixing ratio and the composition was analyzed during the fermentation process for 90 days under moisture content 30% and sealed condition. During the 90 days of fermentation, the pH change of the MFOF was little, and the moisture content was maintained at 34-35% until the 60^th day of fermentation, and then decreased to 30-31% on the 90^th day. Total nitrogen content remained unchanged during the fermentation period, but total carbon content showed a significant difference on the 21^st day of fermentation. It was confirmed that the content of fertilizer composition (nitrogen, phosphate, and potash) of the MFOF was 8.7% or more, which is suitable for the minimum amount standard of the main nutrients to be contained in the organic fertilizer. During the fermentation process of organic fertilizer, the density of bacteria and actinomycetes increased until 60 days and 30 days, respectively, and thereafter little changes were shown, and fungal population showed an increasing trend. As a result of lettuce cultivation test in the greenhouse by applying the MFOF, the growth and yield were comparable to that of using the existing mixed oil cake fertilizer when 100% was applied based on crop standard nitrogen fertilizer level. The use of mixed fermentation organic fertilizer made with domestic by-product resources can be used for use in farms in the future and is expected to contribute to the stable production of environment friendly agricultural products.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.81-85
• /
• 2007

MnTe layers of high crystalline quality were successfully grown on Si(100) : B and Si(111) substrates by molecular beam epitaxy (MBE). Under tellurium-rich condition and the substrate temperature around $400^{\circ}C$, a layer thickness of $700{\AA}$ could be easily obtained with the growth rate of $1.1 {\AA}/s$. We investigated the structural, magnetic and transport properties of MnTe layers by using x-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometry, and physical properties measurement system (PPMS). Characterization of MnTe layers on Si(100) : B and Si(111) substrates by XRD revealed a hexagonal structure of polycrystals with lattice parameters, ${\alpha}=4.143{\pm}0.001{\AA}\;and\;c=6.707{\pm}0.001{\AA}$. Investigation of magnetic and transport properties of MnTe films showed anomalies unlike antiferromagnetic powder MnTe. The temperature dependence of the magnetization data taken in zero-field-tooling (ZFC) and field-cooling (FC) conditions indicates three magnetic transitions at around 21, 49, and 210 K as well as the great irreversibility between ZFC and FC magnetization in the films. These anomalies are attributable to a magnetic-elastic coupling in the films. Magnetization measurements indicate ferromagnetic behaviour with hysteresis loops at 5 and 300 K for MnTe polycrystalline film. The coercivity ($H_c$) values at 5 and 300 K are 55 and 44 Oe, respectively. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviours and showed conduction via Mott variable range hopping at low temperatures.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.