• Title/Summary/Keyword: substitutional sites

Search Result 11, Processing Time 0.033 seconds

Activation energy for the loss of substitutional carbon in $Si_{0.984}C_{0.016}$ grown by solid phase epitaxy

  • Kim, Yong-Jeong;Kim, Tae-Joon;Park, Byungwoo;Song, Jong-Han
    • Journal of Korean Vacuum Science & Technology
    • /
    • v.4 no.2
    • /
    • pp.50-54
    • /
    • 2000
  • We studied the synthesis of S $i_{1-x}$ Cx (x=0.016) epitaxial layer using ion implantation and solid phase epitaxy (SPE). The activation energy Ea was obtained for the loss of substitutional carbon using fourier transform-infrared spectroscopy (FTIR) and high-resolution x-ray diffraction (HR-XRD). In FTIR analysis, the integrated peak intensity was used to quantify the loss of carbon atoms from substitutional to interstitial sites during annealing. The substitutional carbon contents in S $i_{0.984}$ $C_{0.016}$ were also measured using HR-XRD. By dynamic simulations of x-ray rocking curves, the fraction of substitutional carbon was obtained. The effects of annealing temperature and time were also studied by comparing vacuum furnace annealing with rapid thermal annealing (RTA))))))

  • PDF

Theoretical Calculation of Zero Field Splitting of $Mn^{2+}$ Ion in $LiTaO_3$Crystal

  • Yeom, T.H;Lee, S.H
    • Journal of Magnetics
    • /
    • v.6 no.3
    • /
    • pp.77-79
    • /
    • 2001
  • The semi-empirical superposition model has been applied to calculate the zero field splitting parameters of $Mn^{2+}$ion in $LiTaO_3$ single crystal, assuming that $Mn^{2+}$ion occupies one of two possible sites: $Li^{l+} \;or\; Ta^{5+}$ site, respectively. The 2nd-order axial zero field splitting parameters are $958\times10^{-4}cm^{-1}\; at\; Li^{1+}$ site and $193\times 10^{-4}cm^{-1} \;at\; Ta^{5+}$ site for $Mn^{2+}$ions. The 4th-order zero field splitting parameters at $Li^{l+} \;and\; Ta^{5+}$ sites are also determined. These calculated zero field splitting parameters are very important to determine the substitutional sites of doped impurity ions in $LiTaO_3$ crystal.

  • PDF

Roles of Transcription Factor Binding Sites in the D-raf Promoter Region

  • Kwon, Eun-Jeong;Kim, Hyeong-In;Kim, In-Ju
    • Animal cells and systems
    • /
    • v.2 no.1
    • /
    • pp.117-122
    • /
    • 1998
  • D-raf, a Drosophila homolog of the human c-raf-1, is known as a signal transducer in cell proliferation and differentiation. A previous study found that the D-raf gene expression is regulated by the DNA replication-related element (DRE)/DRE-binding factor (DREF) system. In this study, we found the sequences homologous to transcription factor C/EBP, MyoD, STAT and Myc recognition sites in the D-raf promoter. We have generated various base substitutional mutations in these recognition sites and subsequently examined their effects on D-raf promoter activity through transient CAT assays in Kc cells with reporter plasmids p5'-878DrafCAT carrying the mutations in these binding sites. Through gel mobility shift assay using nuclear extracts of Kc cells, we detected factors binding to these recognition sites. Our results show that transcription factor C/EBP, STAT and Myc binding sites in D-raf promoter region play a positive role in transcriptional regulation of the D-raf gene and the Myo D binding site plays a negative role.

  • PDF

Comparative Study of Actual Vegetation and Past Substitutional Vegetation to Baekje Historic Site in Seoul - Focusing on Pungnaptoseong(風納土城) and Mongchontoseong(夢村土城) - (서울 백제역사유적지 관리를 위한 현존식생과 과거 대상식생 비교 연구 - 풍납토성(風納土城)과 몽촌토성(夢村土城)을 중심으로 -)

  • Cha, Doo-Won;Oh, Choong-Hyeon
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.40 no.1
    • /
    • pp.74-80
    • /
    • 2022
  • The vegetation of historical sites has been a form of vegetation that has remained since some years ago, but in modern times, vegetation and terrain have been deformed or damaged due to urban development, which was followed by an industrialization. As a solution to this, it is necessary to establish a plan for restoration and management by referring to the vegetation and landscape remaining in the historic site as indicators. This study was conducted to provide basic data for vegetation and landscape management of Baekje Historic Sites in Seoul by comparing and analyzing location characteristics, existing vegetation, and remaining vegetation of past substitutional vegetation for Pungnaptoseong and Mongchontoseong, Baekje Historic Sites in Seoul. As a result of the study, Pungnaptoseong and Mongchontoseong are located near the main stream of the Han River, Pungnaptoseong is located on a flat land consisting of natural embankments and floodplains, and Mongchontoseong is located on a hilly area. In the case of existing vegetation, it has been confirmed that Pungnaptoseong mainly has ornamental trees planting sites, while Mongchontoseong has a distribution of residual species from the past that grow in villages and hilly lowlands. The Substitutional vegetation of Pungnaptoseong and Mongchontoseong was synthesized based on the location characteristics and actual vegetation, it is estimated that the hilly areas may have been divided into "Quercus aliena Blume.", "Quercus mongolica Fisch. ex Ledeb." and so on, "Pinus densiflora Siebold & Zucc." on dry land,"Salix koreensis Andersson.", "Juglans mandshurica Maxim.", "Alnus japonica (Thunb.) Steud." in rivers and tributaries, "Quercus acutissima Carruth." in the main part of the forest, "Pinus densiflora Siebold & Zucc.", "Salix koreensis Andersson.", "Zelkova serrata (Thunb.) Makino." as a divine tree in the beginning of the village. Since the 1960s, all substitutional vegetation in the past has disappeared due to the introduction of foreign species and the creation of urban areas in Pungnaptoseong and Mongchontoseong, and the landscape has also been damaged. Fortunately, the substitutional vegetation was estimated in consideration of the species of residual trees distributed along the walls, climate, location characteristics, and times, but this study was conducted based on literature and existing vegetation surveys. Therefore, it is necessary to supplement the past target vegetation in Baekje historical sites in Seoul through quantitative experiments such as plant relic analysis in the future.

Feasibility Study of IAQ Enhancement by Visible Light Photocatalyst (가시광 응답형 광촉매 제조와 이를 활용한 실내공기환경 개선 적용 타당성 조사)

  • Lee, Tai-Kyu;Yoon, Woo-Sug;Kim, Dong-Hyung;Hwang, Chul-Soon;Lim, Ji-Hun;Yoon, Jung-Ho;Kim, Young-mi
    • KIEAE Journal
    • /
    • v.4 no.2
    • /
    • pp.37-40
    • /
    • 2004
  • New visible photocatalyst(Nanovis$^{(R)}$) has been synthesized to overcome the barrier of limitation of UV light utilization of current $TiO_2$ photocatalyst. It was found that red shift of absorption spectrum to 550nm was achieved. Its physical properties were characterized by XRD, BET and TEM. It is also observed that Nanovis$^{(R)}$ has a photocatalytic activity for photodegradation of Trichloroethylene under visible light irradiation. V,VII group doped into substitutional sites of $TiO_2$ has proven to be indispensable for band-gap narrowing and photocatalytic activity. These test results lead us to conclude that Nanovis$^{(R)}$ can be used for IAQ improvemen and for photocatalytic water splitting to hydrogen.

Coulometric Titration Study on the Nonstoichiometry in Copper Doped Cobaltous Oxide ((${Co_{1-x}}{Cu_x}$)$_{1-\delta}$ O (전하적정법에 의한 (${Co_{1-x}}{Cu_x}$)$_{1-\delta}$ O의 산소 부정비량 측정)

  • ;Michael Schroeder;Manfred Martin
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.8
    • /
    • pp.799-804
    • /
    • 2000
  • Coulometric titration experiments have been done for copper doped cobaltous oxide (Co1-xCux)1-$\delta$ O with various dopant concentrations. We present the obtained experimental data and compare our results to those of previous thermogravimetric investigation. The experimental data are fitted by theoretical calculations based on various defect models. For this modeling, we considered different types fo major defects like copper in substitutional and interstitial lattice sites as well as copper vacancy. We also introduced the copper evaporation effect during titration experiment into our consideration.

  • PDF

Control of electrical types in the P-doped ZnO thin film by Ar/$O_2$ gas flow ratio

  • Kim, Young-Yi;Han, Won-Suk;Kong, Bo-Hyun;Cho, Hyung-Koun;Kim, Jun-Ho;Lee, Ho-Seoung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.11-11
    • /
    • 2008
  • ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

  • PDF

Ga-doped ZnO nanorod arrays grown by thermal evaporation and their electrical behavior (수직 배향된 Ga-doped ZnO nanorods의 합성과 전기적 특성)

  • Ahn, C.H.;Han, W.S.;Kong, B.H.;Kim, Y.Y.;Cho, H.K.;Kim, J.J.;Kim, H.S.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.414-414
    • /
    • 2008
  • Vertically well-aligned Ga-doped ZnO nanorods with different Ga contents were grown by thermal evaporation on a ZnO template. The Ga-doped ZnO nanorods synthesized with 50 wt % Ga with respect to the Zn content showed maximum compressive stress relative to the ZnO template, which led to a rapid growth rate along the c-axis due to the rapid release of stored strain energy. A further increase in the Ga content improved the conductivity of the nanorods due to the substitutional incorporation of Ga atoms in the Zn sites based on a decrease in lattice spacing. The p-n diode structure with Ga-doped ZnO nanorods, as a n-type, displayed a distinct white light luminescence from the side-view of the device, showing weak ultraviolet and various deep-level emissions.

  • PDF

Preparation and Characterization of Visible Light-Sensitive N-doped TiO2 Using a Sol-gel Method (Sol-gel법을 이용한 백색도가 높은 가시광 응답형 N-doped TiO2 제조 및 특성 평가 연구)

  • Lee, NaRi;Yu, Ri;Kim, Tae Kwan;Pee, Jae-Hwan;Kim, YooJin
    • Journal of Powder Materials
    • /
    • v.24 no.6
    • /
    • pp.477-482
    • /
    • 2017
  • Nitrogen-doped titanium dioxide (N-doped $TiO_2$) is attracting continuously increasing attention as a material for environmental photocatalysis. The N-atoms can occupy both interstitial and substitutional positions in the solid, with some evidence of a preference for interstitial sites. In this study, N-doped $TiO_2$ is prepared by the sol-gel method using $NH_4OH$ and $NH_4Cl$ as N ion doping agents, and the physical and photocatalytic properties with changes in the synthesis temperature and amount of agent are analyzed. The photocatalytic activities of the N-doped $TiO_2$ samples are evaluated based on the decomposition of methylene blue (MB) under visible-light irradiation. The addition of 5 wt% $NH_4Cl$ produces the best physical properties. As per the UV-vis analysis results, the N-doped $TiO_2$ exhibits a higher visible-light activity than the undoped $TiO_2$. The wavelength of the N-doped $TiO_2$ shifts to the visible-light region up to 412 nm. In addition, this sample shows MB removal of approximately 81%, with the whiteness increasing to +97 when the synthesis temperature is $600^{\circ}C$. The coloration and phase structure of the N-doped $TiO_2$ are characterized in detail using UV-vis, CIE Lab color parameter measurements, and powder X-ray diffraction (XRD).

Structural and Electrical Properties of Fluorine-doped Zinc Tin Oxide Thin Films Prepared by Radio-Frequency Magnetron Sputtering

  • Pandey, Rina;Cho, Se Hee;Hwang, Do Kyung;Choi, Won Kook
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.335-335
    • /
    • 2014
  • Over the past several years, transparent conducting oxides have been extensively studied in order to replace indium tin oxide (ITO). Here we report on fluorine doped zinc tin oxide (FZTO) films deposited on glass substrates by radio-frequency (RF) magnetron sputtering using a 30 wt% ZnO with 70 wt% SnO2 ceramic targets. The F-doping was carried out by introducing a mixed gas of pure Ar, CF4, and O2 forming gas into the sputtering chamber while sputtering ZTO target. Annealing temperature affects the structural, electrical and optical properties of FZTO thin films. All the as-deposited FZTO films grown at room temperature are found to be amorphous because of the immiscibility of SnO2 and ZnO. Even after the as-deposited FZTO films were annealed from $300{\sim}500^{\circ}C$, there were no significant changes. However, when the sample is annealed temperature up to $600^{\circ}C$, two distinct diffraction peaks appear in XRD spectra at $2{\Theta}=34.0^{\circ}$ and $52.02^{\circ}$, respectively, which correspond to the (101) and (211) planes of rutile phase SnO2. FZTO thin film annealed at $600^{\circ}C$ resulted in decrease of resistivity $5.47{\times}10^{-3}{\Omega}cm$, carrier concentration ~1019 cm-3, mobility~20 cm2 V-1s-1 and increase of optical band gap from 3.41 to 3.60 eV with increasing the annealing temperatures and well explained by Burstein-Moss effect. Change of work function with the annealing temperature was obtained by ultraviolet photoemission spectroscopy. The increase of annealing temperature leads to increase of work function from ${\phi}=3.80eV$ (as-deposited FZTO) to ${\phi}=4.10eV$ ($600^{\circ}C$ annealed FZTO) which are quite smaller than 4.62 eV for Al-ZnO and 4.74 eV for SnO2. Through X-ray photoelectron spectroscopy, incorporation of F atoms was found at around the binding energy of 684.28 eV in the as-deposited and annealed FZTO up to 400oC, but can't be observed in the annealed FZTO at 500oC. This result indicates that F atoms in FZTO films are loosely bound or probably located in the interstitial sites instead of substitutional sites and thus easily diffused into the vacuum from the films by thermal annealing. The optical transmittance of FZTO films was higher than 80% in all specimens and 2-3% higher than ZTO films. FZTO is a possible potential transparent conducting oxide (TCO) alternative for application in optoelectronics.

  • PDF