• 제목/요약/키워드: substation

검색결과 998건 처리시간 0.028초

부스바 접촉부 체결상태 모니터링 시스템 설계 (Design of Busbar Joint Condition Monitoring System)

  • 정성학;이영동
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.823-824
    • /
    • 2016
  • 일반적으로 배전반, 분전반, 전동기제어반(Motor Control Center;MCC)은 집단거주지역, 빌딩, 학교, 공장, 항만, 공항, 상하수 처리장, 변전소, 중공업 플랜트 등의 광범위한 전력 수용가에 설치되어 특고압의 전력을 해당 설비들에 요구되는 전압으로 변환하여 공급하는데 사용된다. 이와 같은 배전반, 분전반, MCC에 포함되는 전기설비의 사고는 부스바 접속부의 열화에 의한 사고, 부스바의 접점 및 연결 부위에서의 접촉 불량에 의한 사고, 부스바 접속부의 과열 현상에 의한 사고로 구분된다. 본 논문에서는 부스바 접촉부의 볼트 및 너트의 풀림상태, 접촉부 열화 측정이 가능하며, 배전반 내부온도와 부스바 온도를 측정하여 추이변화에 대한 감시기능이 있는 부스바 접촉부 체결상태 모니터링 시스템을 제안한다. 제안된 시스템은 정량적인 부스바 체결상태 검출과 부스바 현재온도 검출의 이중적인 센싱에 의해 부스바 접촉부 정상여부 판별이 가능하여 전기설비 사고를 줄일 수 있을 것으로 기대된다.

  • PDF

TBM 디스크커터의 마모량 실시간 계측을 위한 연구현황 (Introduction to Research Trend of Real-Time Measurement for Wear of TBM Disc Cutter)

  • 박민성;주민석;조민성;이준;김정주;정호영
    • 터널과지하공간
    • /
    • 제32권6호
    • /
    • pp.478-490
    • /
    • 2022
  • TBM의 주요 절삭도구인 디스크커터는 과다하게 마모되거나 손상된 경우 적절한 시기에 교체되어야 한다. 일반적으로 커터의 교체여부를 판단하기 위해서 작업자가 커터헤드 챔버의 내부로 접근하여 디스크 커터의 상태와 마모량을 계측하고 있다. 하지만 커터헤드(cutterhead) 챔버(chamber) 내부는 작업자에게 열악한 조건일 경우가 많아 작업자의 안전과 관련한 이슈가 있으며, 인력에 의해서 계측이 이루어짐에 따라 계측치의 오차도 발생하는 것으로 보고되고 있다. 이러한 한계점을 극복하고자 현재 해외에서는 디스크커터의 마모정도를 계측센서를 통해 굴착 중에 실시간으로 측정하기 위한 기술의 개발이 활발하게 이루어지고 있으며, 본 연구에서는 현재까지 해외의 문헌을 통해 보고되고 있는 TBM 디스크커터의 마모량 계측에 관한 연구현황에 대하여 소개하고자 하였다. 여러 형식의 센서가 디스크커터의 마모계측을 위해 활용되고 있으며, 향후 국내에서도 유사한 기술의 개발이 이루어지는 경우에 유용한 참고자료가 될 수 있을 것으로 판단된다.

전자기 반발 구동장치를 사용한 고속 차단기 개발 (Development of High Speed Circuit Breaker using Electromagnetic Repulsion Actuator)

  • 황광수;김영일;문채주
    • 한국전자통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.441-448
    • /
    • 2022
  • 배전분야 전력계통에 적용되는 보호기기류는 변전소 차단기, 배전선로의 리클로저, 최소 전류 용량 회로, 고장구간 차단기 등이 있다. 이들은 부분 정전이나 대규모 사고를 방지하고 선로의 순간고장 또는 영구고장 발생 시 정상 계통이 건전성을 유지할 수 있도록 광역 정전 파급을 방지한다. 그러나 사고가 발생할 경우 변전소 차단기와 배전선로 보호기기 간의 보호협조 미비로 인하여 광역 정전을 초래할 수 있다. 더 좋은 전력시스템의 건전성을 확보하기 위하여 1주기(16ms) 이내로 동작하는 차단기를 개발할 필요성이 요구된다. 본 연구에서는 친환경 가스절연 방식의 고속도 차단기를 개발하였으며, IEC 62271-111 표준에 기반한 시험에서 우수한 결과를 얻었다. 이 기기는 고장구간을 정확하고 빠르고 신속하게 분리하여 광역 정전 예방에 기여할 것으로 기대된다.

전력분야의 바이오 기반 친환경 전기 절연유 적용에 관한 개발 동향 분석 (Analysis of Development Trends on Bio-based Environmental Transformers Oils in Power Sector)

  • 김재곤;민영제;김목연;곽병섭;박현주
    • Tribology and Lubricants
    • /
    • 제38권2호
    • /
    • pp.41-52
    • /
    • 2022
  • Mineral electrical insulating oil, which is widely used in transformers, exhibits excellent cooling performance and transformer efficiency. However, given that it is composed of petroleum-based components, it is weak in terms of biodegradability. This causes environmental problems in case of leakage and a low flash point, which is a factor that would cause great damage in the event of a fire in a substation. In this context, the use of eco-friendly electric insulating oil composed of bio-based vegetable oil and synthetic ester, which has excellent biodegradability and flame retardancy performance, has recently been expanded to the field of electric power, and various research and development (R&D) studies are in progress. According to different research results, vegetable oil and synthetic ester manufacturing technology, thermal stability, oxidation stability, property change, and quality control, which are characteristics of eco-friendly electrical insulating oils, are major factors affecting the maintenance of insulating oil properties. In addition, power companies have established and operated quality control standards according to the use of eco-friendly electrical insulating oil as they expand the exploitatoin of renewable energy in electricity production. In particular, deterioration and oxidation characteristics were jointly identified in R&D as an important influencing factor according to the content of saturated and unsaturated fatty acids present in vegetable oils and synthetic esters in power transformer applications.

지상변압기의 내부 보호장비 작동을 위한 MCA 보호협조에 대한 연구 (A study on Protective Coordination of MCA for Performing of the Pad Mounted Transformer's inside Protective Device)

  • 현승윤;김창환
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제8권1호
    • /
    • pp.5-7
    • /
    • 2022
  • KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

TBM 디스크커터의 실시간 하중 계측을 위한 연구현황 (Research Trend of Real-Time Measurement for Acting Force of TBM Disc Cutter)

  • 기경민;김정주;정호영
    • 터널과지하공간
    • /
    • 제33권4호
    • /
    • pp.244-254
    • /
    • 2023
  • TBM에 장착되어 암석을 절삭하는 디스크커터에는 암반을 굴착하는 과정에서 세 방향의 절삭력이 작용한다. 일반적으로 디스크커터의 절삭력은 굴착대상암반의 강도에 따라 증가하는 것으로 알려져 있고, 디스크커터가 여러 원인에 의해 정상적으로 회전이 이루어지지 않는 경우에는 회전력이 급격하게 증가할 수 있다. 따라서 굴착 도중 디스크커터에 작용하는 절삭력은 굴착의 대상이 되는 암반의 상태나 디스크커터의 절삭상태를 나타내는 중요한 정보가 될 수 있다. 이러한 이유로 해외를 중심으로 디스크커터의 작용력을 실시간으로 측정하기 위한 기술의 개발이 이루어지고 있으며, 본 연구에서는 현재까지 해외의 문헌을 통해 보고되고 있는 TBM 디스크커터의 하중계측에 관한 연구현황에 대하여 소개하고자 하였다. 향후 국내에서도 유사한 기술의 개발이 이루어지는 경우에 유용한 참고자료가 될 수 있을 것으로 판단된다.

[논문철회]전력계통 네트워크 통신방식 변화에 따른 사이버위협 분석 및 대응방안 제시 ([Retracted]Cyber Threat Analysis on Network Communication in Power System and Countermeasures Suggestions)

  • 지일환;전승호;서정택
    • 스마트미디어저널
    • /
    • 제12권2호
    • /
    • pp.91-102
    • /
    • 2023
  • 전력거래소 에너지 관리 시스템(Energy Management System, EMS)는 발전소 및 변전소와 통신을 수행하며 전력공급의 안정성 및 연속성, 실시간성, 경제성을 위하여 송·변전시스템의 변전소 및 발전소 운전상태를 모니터링하고 발전소와 변전소를 제어한다. 현재 전력거래소 EMS는 발전소 및 변전소와 시리얼 통신기반 DNP(Distributed Network Protocol) 3.0 프로토콜을 기반으로 통신을 수행하고 있다. 하지만, 시리얼 통신장비 수급의 어려움, 신재생 발전설비를 포함한 통신을 수행할 신규 설비의 지속적인 증가로 인해 시리얼 포트 및 모뎀의 설치 공간 부족 등의 문제가 제기되고 있다. 이에 본 논문에서는 전력거래소 EMS의 기존 시리얼 통신방식 대신 TCP/IP기반의 통신 방식을 제시하며, 통신방식 변화에 따른 발생 가능한 보안 위험 분석 및 보안 위험에 대한 대응방안을 제시한다.

QTL Mapping for Protein Content Derived from a Cross between oryza sativa and Weedy Rice

  • Ju-Won Kang;Ji-Yoon Lee;Gi-Un Seong;Youngho Kwon;So-Myeong Lee;Dong Jin Shin;Sais-Beul Lee;Hyunnggon Mang;Dong Soo Park;Jong-Hee Lee;Jun-Hyeon Cho;Gi-Won Oh
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.268-268
    • /
    • 2022
  • Protein is a major nutrient of food and has long been studied for nutritional and utility value. Among them, rice protein is attracting attention because of its hypoallergenic characteristics and nutritional value. Mutant DM225 with increased protein content was selected by EMS treatment on the weed rice Dharial. QTL analysis of Protein content was carried out using BC2F2 populations derived from a cross between "Hanareum2" as a recurrent parent and "DM225" as a donor parent. The protein content of populations was between 5~11%, with an average of 7.7%. To identify QTLs related to Protein content, 117 KASP markers(polymorphic ratio: 15%) showing polymorphisms between the parents were genotyped for the BC2F2 population. One QTL was detected between markers SK07 06 and SK07_10 on chromosome 7(LOD: 28.1). This QTL explained 71.4% of the phenotypic variance for Protein content. This QTL will be useful for protein-related rice breeding program.

  • PDF

TBM 챔버 상태와 전송 거리에 따른 저전력 블루투스 신호의 수신 강도 분석: 실험실 모사 실험 (Examining the Influence of TBM Chamber Condition and Transmission Distance on the Received Strength of Bluetooth Low Energy Signals: A Laboratory Simulation Experiment)

  • 최요순;정호영;김정주
    • 터널과지하공간
    • /
    • 제33권5호
    • /
    • pp.425-434
    • /
    • 2023
  • TBM 디스크 커터의 마모량을 실시간 계측하기 위해서는 센서를 이용해 계측을 자동화하는 것뿐만 아니라, 계측된 데이터를 후방의 정보처리시스템에 안정적으로 전송하는 것도 중요하다. 본 연구에서는 TBM 커터헤드에 설치된 센서로부터 챔버 후방에 설치된 수신기로 데이터를 무선 전송할 때 저전력 블루투스(Bluetooth Low Energy, BLE) 기술의 활용 가능성을 검토하였다. 실험실 모사 실험을 통해 송신기의 신호강도, 송신기와 수신기 사이의 거리, 챔버 공간에 채워진 물질의 종류에 따라 변화하는 수신기의 신호 수신 강도(Received Signal Strength Index, RSSI)의 특성을 분석하였다. 송신기의 신호강도를 0 dBm 이상으로 설정하면 실험에서 고려한 모든 이격거리 조건과 챔버의 상태 조건에서 데이터를 무선 전송할 수 있었다.

부유식 해상풍력 계통연계를 위한 송변전설비계획 연구 (Transmission and Substation Planning Study for Grid Connection of Floating Offshore Wind Power)

  • 임충환;배문성;신용두;문채주
    • 한국전자통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.53-64
    • /
    • 2024
  • 울산인근을 중심으로 한 영남 남동부 지역은 대규모 부유식 해상풍력이 계획되어 있으며 원자력발전소의 신설과 기존 원자력발전소의 수명연장 등에 따라 전력망의 확충이 요구되고 있다. 정부에서는 10차 전력수급계획에 따라 이 지역의 전력계통 신설계획을 발표하였으나 경주 인근의 국립공원과 문화재 보호구역을 경과함에 따라 실제 건설단계에 어려움이 많을 것으로 예상된다. 이에 따라 본 연구에서는 기존 선로를 활용하고 신설을 최소화하는 방안을 제시하고 이 계통에 대해 PSS/E를 활용하여 과도안정도를 분석하여 타당성을 입증하였다.