• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.155-159
• /
• 2004

This study was carried out to investigate the general characteristics and viability of sperm after freezing and thawing and the pregnancy rates after artificial insemination with thawed semen. The rates of viable sperm after slow and rapid freezing were 87.4±3.85% and 70.8±4.45%, respectively which were significantly lower than that of fresh semen control (91.7±3.45%). The mean concentration of epididymal sperm after dilution in 1.0 ml saline and. 3.0 ml extender in a various concentrations of cryoprotectants was 124.5±48.3 x 10/sup 6/ (range of 45 x 10/sup 6/ to 280 X 10/sup 6/ /ml). There was a significant difference not in the percentage of acrosome-reacted sperm, but in the percentage of capacitated sperm, between fresh and frozen-thawed epididymal semen. When frozen-thawed after diluting with tris-buffer extender containing glycerol, DMSO and ethylene glycol with concentration of 2 to 6%, the rates of epididymal sperm exposed to different cryoprotectants ranged from 14.4±4.7% to 20.7±5.8%, 17.8±5.2% to 36.5±4.9%, and 14.4±4.6% to 18.5±5.3%, respectively which were lower compare to fresh semen control. The pregnancy rate after artificial insemination with frozen semen was 70.6%, whereas that with fresh semen was 90.0% in dogs with naturally induced estrus.

• Korean Journal of Animal Reproduction
• /
• v.8 no.2
• /
• pp.110-115
• /
• 1984

These experiments were carried out to obtain the information about the optimal pH osmolality affecting in vitro fertilization of the mouse eggs, to elucidate the 2-cell block to development in vitro and to find out the method of controlling the subsequent embryo development in vitro. pH and osomlality was adjusted by adding NaCl or NaHCO3 to the basic salt solution. In vitro fertilization were carried out by inroducting the cumulus masses to the suspension of epididymal spermatozoa at each pH, osmolality, and 10${\mu}$M-EDTA medium. The results obtained in these experiments were summarized as follows: 1. The fertilization rates in vitro at each medium of 235, 252, 269, 286, 306, 323, 345, 368, 393 mosmol were 15.6, 38.2, 65.7, 75.6, 80.9, 74.3, 58.1, 35.1, 24.3, 11.1%, respectively. 2. The fertilization rates in vitro at each medium of pH 6.1, 6.4, 6.7, 7.0, 7.3, 7.6, 7.9, 8.1 were 11.8, 17.9, 32.4, 61.9, 79.5, 76.7, 53.5, 13.6%, respectively. 3. In case of ICR female x ICR male embryos, the development rate of 2-cell embryos to 4-8 cell embryos was 16.2% at normal medium, but the rate was increased to 49.3% in medium containging 10 ${\mu}$M-DETA; In case of C3H female x ICR male embryos, the development rate was 41.0% at normal medium, but the rate was increased to 71.7% at 10 ${\mu}$M-EDTA-medium.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.223-227
• /
• 2002

As the channel length of device shrinks below $0.13{\mu}m$, CMP(chemical mechanical polishing) process got into key process for global planarization in the chip manufacturing process. The removal rate and non-uniformity of the CMP characteristics occupy an important position to CMP process control. Especially, the post-CMP thickness variation depends on the device yield as well as the stability of subsequent process. In this paper, every wafer polished two times for the improvement of oxide CMP process characteristics. Then, we discussed the removal rate and non-uniformity characteristics of post-CMP process. As a result of CMP experiment, we have obtained within-wafer non-uniformity (WIWNU) below 4 [%], and wafer-to-wafer non-uniformity (WTWNU) within 3.5 [%]. It is very good result, because the reliable non-uniformity of CMP process is within 5 [%].

• Atmosphere
• /
• v.20 no.3
• /
• pp.333-341
• /
• 2010

The stratiform rain fraction is investigated in the tropical boreal winter Madden-Julian oscillation (MJO) and summer intraseasonal oscillation (ISO) using Tropical Rainfall Measuring Mission (TRMM) Precipitation Rader data for the 11-yr period from 1998 to 2008. Composite analysis shows that the MJO/ISO produces larger stratiform rain rate than convective rain rate for nearly all phases following the propagating MJO/ISO deep clouds, with the greatest stratiform rainfall amount when the MJO/ISO center is located over the central-eastern Indian Ocean and the western Pacific. The fraction of the intraseasonally filtered stratiform rainfall compared to total rainfall (i.e., convective plus stratiform rainfall) amounts to 53~56%, which is 13~16% larger than the stratiform rain fraction estimated for the same data on seasonal-to-annual time scales by Schumacher and Houze. This indicates that the MJO/ISO exhibits the organized rainfall process which is characterized by the shallow convection/heating at the incipient phase and the subsequent flare-up of strong deep convection, followed by the development of stratiform clouds at the upper troposphere.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1877-1891
• /
• 2016

In video coding, the goal of rate control (RC) is not only to avoid the undesirable fluctuation in bit allocation, but also to provide a good visual perception. In this paper, a novel frame-level rate control algorithm for High Efficiency Video Coding (HEVC) is proposed. Firstly a model that reveals the relationship between bit per pixel (bpp), the bitrate of the intra frame and the bitrate of the subsequent inter frames in a group of pictures (GOP) is established, based on which the target bitrate of the first intra frame is well estimated. Then a novel frame-level bit allocation algorithm is developed, which provides a robust bit balancing scheme between the intra frame and the inter frames in a GOP to achieve the visual quality smoothness throughout the whole sequence. Our experimental results show that when compared to the RC scheme for HEVC encoder HM-16.0, the proposed algorithm can produce reconstructed frames with more consistent objective video quality. In addition, the objective visual quality of the reconstructed frames can be improved with less bitrate.

• Journal of Biomedical Engineering Research
• /
• v.39 no.4
• /
• pp.161-167
• /
• 2018

Polyvinyl alcohol/sodium carboxymethyl cellulose (PVA/NaCMC) hydrogels were prepared by physical crosslinking (cyclic freezing/thawing) and gamma (${\gamma}$)-ray irradiation to evaluate the effect of NaCMC concentration (2~8 wt%) on the mechanical properties and the biocompatibility of the PVA/NaCMC hydrogels. The swelling rate of PVA/NaCMC hydrogels regardless of irradiation rose with increasing NaCMC content from 2 wt% to 8 wt%, while the gelation rate was the reverse. As the NaCMC content increased from 2 wt% to 6 wt%, the compressive strength of the hydrogels increased dramatically from $8.5{\pm}2.0kPa$ to $52.7{\pm}2.5kPa$ before irradiation and from $13.5{\pm}2.9kPa$ to $65.5{\pm}8.7kPa$ after irradiation. When 8 wt% NaCMC was added afterwards, the compressive strength decreased however. The irradiated PVA/NaCMC hydrogels containing 6 wt% NaCMC exhibited the tailored properties of the swelling rate of $118{\pm}3.7%$, the gelation rate of $71.4{\pm}1.3%$, the strength of $65.5{\pm}8.7kPa$, respectively, and no cytotoxicity was observed.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.81-89
• /
• 2005

Relationship between dynamic friction resistances and shear displacement rate, and other frictional characteristics of non-geotextile-involving geosynthetic interfaces was experimentally studied. A cyclic, displacement rate-controlled experimental setup built on a shaking table was used. The subsequent multiple rate tests showed that interfaces that do not involve geotextiles have distinct shearing characteristics that can be differentiated from the interfaces involving geotextiles. Unlike those of the geotextile-involving interfaces, shear behaviors of the interfaces involving only non-geotextiles tend to be not sensitive to shear displacement rate, and are approximately rigid-perfectly plastic.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.521-524
• /
• 2008

Effect of prior deformation on the sliding wear of the ultra-fine grained (UFG) ferrite-martensite dual phase (DP) steel was investigated. The UFG DP steel was fabricated by the ECAP and subsequent intercritical annealing. The steel was cold rolled before the wear test, and the effect of the prior deformation on the wear was examined. The wear tests were carried out at various loads against a bearing steel ball. The wear rate of the UFG DP steel that did not experience the prior deformation was higher than that of the coarse-grained (CG) DP steel, because of more severe surface shear deformation. The wear rate of the specimens with prior deformation was much higher than that of the specimen without prior deformation. The deformed CG DP specimen showed higher rate than the deformed UFG DP specimen, and the rate-variation of the CG DP steel was much bigger under the same test condition.

• Development and Reproduction
• /
• v.17 no.4
• /
• pp.337-343
• /
• 2013

Post-thawed larval rearing in Pacific oyster Crassostrea gigas was performed to investigate the survival rate with time course in three kinds of larvae cryopreserved. The highest survival rate and larval activity index (LAI) of post-thawed larvae were obtained from the permeation in 0.2 M sucrose and 2.0 M ethylene glycol (EG) at $-1^{\circ}C/min$ in freezing speed showing the survival rates just after thawing of 63.8% in trochophore, 84.1% in D-shaped veliger and 56.3% in early umbo veliger. In post-thawed larval rearing with food supply, the larvae lasted their lives until 24 hours in trochophore, 75 hours in D-shaped veliger and 57 hours in early umbo veliger. The results suggested that each larval stage post-thawed revealed no more further development to subsequent respective stage.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.601-610
• /
• 2013

Purpose: The purpose of this paper is to analyze the relationship between R&D investment and growth rate of manufacturing firms in Incheon. Methods: The balanced panel data of 246 firms which have existed for the period 2001-2012 are constructed. As a method of analysis, fixed effects panel data model is used. Results: There is a one year lag in the relationship between R&D intensity and the subsequent sales growth of firms and its relation depends on the firms' characteristics. Conclusion: We suggest the emphasis on R&D investment for firms' growth and the differentiated R&D program based on firm size. This article has the limitation that various types of R&D investment cannot be included in this analysis.