• 제목/요약/키워드: submerged weight

검색결과 123건 처리시간 0.025초

아세트산염 배지에서의 검정곰팡이(Aspergillus niger)의 포자형성에 관한 연구 (Studies on the Spore Formation of Aspergillus niger in Potassium Acetate Medium)

  • 이호영;김종협
    • 한국균학회지
    • /
    • 제15권3호
    • /
    • pp.149-157
    • /
    • 1987
  • 1. 검정곰팡이 (Aspergillus niger)를 실험균주로 하여 동조적으로 액침배양한 결과 포자의 발아로 부터 균사의 생장, 생식기관의 성숙 및 경자까지의 분화를 재현시킬 수 있었으며 그 다음의 아세트산염 배지에서 농도와 pH가 적절할 때 포자의 형성을 볼 수 있었다. 2. pH 5.5, 6.0, 6.5 및 7.0로 조절하고 각각 농도를 대조구, 20mM, 40mM, 80mM 및 160mM로 조절한 아세트산염 배지에서 검정곰팡이를 $28^{\circ}C$의 온도로 4일간 진탕배양하면서 균체량과 pH변화, 포자개시 시간을 측정하였다. 아세트산염 배지에서 적응이 되면 균체량은 증가하였으며 성장이 진행되면서 PH가 증가하다가 포자가 형성되면 pH는 감소하였다. pH 7.0의 아세트산염 배지에서는 균이 적응할 수 없고 pH 증가가 너무 지나치게 되어 균체량은 점차 감소하였다. 또 포자형성개시 시간은 pH 5.5의 아세트산염 배지에서는 그 농도가 20mM일 때 1일, 40mM일 때 2일, 80mM일 때 3일, 160mM일 때 4일이 소요되었으며 pH 6.0의 아세트산염 배지에서는 그 농도가 40mM일 때 2일만에, 80mM일 때 1일만에, 160mM일 때 4일만에 포자가 형성되었다. 또 pH 6.5의 아세트산염 배지에서는 80mM의 농도일 때 3일만에, 160mM일 때 4일만에 포자가 형성되었고 pH 7.0의 아세트산염 배지에서는 포자가 형성되지 않았다. 모든 pH의 아세트산염 배지에서 대조구에서는 포자가 형성되지 않았다.

  • PDF

시멘트 혼합토의 내구성 평가법에 관한 연구 (A Study on Durability Test of Cemented Soils)

  • 박성식;황세훈
    • 한국지반공학회논문집
    • /
    • 제28권11호
    • /
    • pp.79-86
    • /
    • 2012
  • 최근 소량의 시멘트를 혼합한 고결토가 도로 보조기층, 뒤채움재, 가물막이 댐 등 각종 토목 현장에서 많이 사용되고 있다. 이와 같이 시멘트비가 낮은 고결토는 반복되는 건습이나 다양한 풍화작용에 의해 내구성이 저하될 수 있다. 하지만 암석과 달리 고결토의 내구성을 평가하는 방법에 대한 연구는 부족한 실정이다. 따라서 본 연구에서는 기존의 슬레이크 내구성시험과 초음파 세척기를 이용하여 시멘트가 혼합된 고결토의 내구성을 평가하기 위한 시험법을 개발하고자 하였다. 고결모래의 시멘트비(4, 6, 8, 12%)를 달리하여 원기둥 형태의 공시체를 제작한 다음 수중 또는 대기중에서 3일 동안 양생하였다. 3일 양생 후 건조로에서 1일 동안 건조시킨 다음 다시 1일 동안 수침 시킨 후 슬레이크 내구성시험 및 초음파 세척기를 10분 또는 20분 동안 작동하여 시험 전후의 중량 손실 정도를 계산하여 내구성을 평가하였다. 시멘트비가 4%로 상당히 낮은 경우 고결모래의 중량 손실률은 7-25%인 초음파 세척기 시험법에 비해 슬레이크 내구성시험은 30-60%로 상대적으로 높았으나, 시멘트비가 8% 이상인 경우에는 두 시험방법 모두 중량 손실률이 10% 이내로 큰 차이가 없었다. 내구성지수는 시멘트비가 증가할수록 증가하였으며, 대기중 양생한 공시체보다 수중 양생한 공시체의 내구성지수가 높았다. 시멘트비가 낮은 고결토의 내구성을 평가하기에는 중량 손실이 많은 슬레이크 내구성시험보다 본 연구에서 새롭게 제안한 초음파 세척기를 이용한 시험법이 효과적임을 알 수 있었다.

물달개비 경엽(莖葉)의 침수여부(沈水與否)에 따른 생장(生長), 양분흡수(養分吸收) 및 광합성(光合成) 비교(比較) (Effect of Submergence and Air Exposure of the Shoot on Growth, Nutrient Uptake and Photosynthesis in Monochoria vaginalis Presl.)

  • 소창호;양규승;권용웅
    • 한국잡초학회지
    • /
    • 제16권1호
    • /
    • pp.14-20
    • /
    • 1996
  • 물달개비는 논에서 자라는 수륙양서형(水陸兩棲型) 잡초로 수중(水中) 및 토중(士中)에서 발아하여 초기에는 생장속도가 늦지만 경엽이 대기중으로 노출되면 생장속도가 빨라져 경엽부의 침수여부에 따라 생장의 차이를 보이는 잡초이다. 본 실험은 경엽부(莖葉部)가 침수(沈水)되었을 경우와 대기중에 노출되었을 경우 생장량(生長量)과 무기양분(無機養分)의 흡수량을 비고하고 기중광합성(氣中光合成)과 수중광합성(水中光合成)을 비교하여 물달개비의 생태적 특성을 구명하고자 하였다. 물달개비를 3엽기 또는 5엽기까지 수경재배(水耕栽培)로 균일하게 키운 다음 수경액으로 경엽부가 침수되도록 한 침수처리와 근부(根部)만 수경액을 공급한 처리를 하여 조사 및 측정을 하였다. 생장량은 초장(草長), 염수(葉數), 염변적(葉面積) 및 생체중(生體重)과 건물중(乾物重)을 처리 후 8일에 조사하였고, 엽록소함량과 무기양분은 2일마다 8일간 조사하였다. 광합성(光合成)은 2일 간격으로 10일 동안 측정하였는데, 기중광합성은 휴대용광합성측정기(LI-6000)로, 수중광합성(水中光合成)은 $CO_2$ 전극(電極)으로 측정하였다. 1. 침수조건하에서 물달개비의 초장(草長)은 신장(伸長)되었으나, 엽수, 엽면적 및 생체중과 건물중은 감소(減少)하였다. 초장은 3엽기에 처리한 것보다 5엽기에 처리한 것이 신장속도가 빨랐다. 2. 엽록소함량은 침수처리(沈水處理) 초기에는 증가하였으나, 3엽기의 경우 처리 2일 이후에, 5엽기의 경우 4일 이후에 급격히 감소하였다. 3. 경엽부의 침수에 따른 무기양분(無機養分)의 흡수량은 $NH^+\;_4$, $NO^-\;_3$, 및 $P_2O_5$은 3엽기 및 5엽기 침수시 모두 현저하게 감소하였으며, $K^+$, $Ca^{++}$$Mg^{++}$은 3엽기에는 큰 차이를 보이지 않았으나 5엽기의 경우 $Ca^{++}$$Mg^{++}$은 침수처리시 흡수량이 약간 증가하였다. 4. 기중광합성(氣中光合成)은 생장이 진전됨에 따라 증가하였으나, 수중광합성(水中光合成)은 3엽기 및 5엽기 모두 침수처리 초기에는 증가하였으나 8일 이후에는 뚜렷이 감소하였다.

  • PDF

Relationship Between Morphology and Itaconic Acid Production by Aspergillus terreus

  • Gao, Qian;Liu, Jie;Liu, Liming
    • Journal of Microbiology and Biotechnology
    • /
    • 제24권2호
    • /
    • pp.168-176
    • /
    • 2014
  • The morphology of filamentous fungi closely correlates with the productivity in submerged culture. Using itaconic acid (IA) production by Aspergillus terreus as a research model, the quantitative relationship between the growth form of A. terreus and IA production was investigated. IA fermentation was scaled up from shake flasks to a 7 L stirred tank bioreactor based on the quantitative relationship. Our results demonstrated the following: (1) Three morphologies of A. terreus were formed by changing the inoculum level and shape of the flask. (2) Investigation of the effects of the three morphologies on broth rheology and IA production revealed the higher yield of IA on dry cell weight (DCW, IA/DCW) and yield of glucose on DCW (consumed glucose/DCW) were achieved during clump growth of A. terreus. (3) By varying the $KH_2PO_4$ concentration and culture temperature, the relationships between clump diameter and IA production were established, demonstrating that the yield of IA on DCW ($R^2$ = 0.9809) and yield of glucose on DCW ($R^2$ = 0.9421) were closely correlated with clump diameter. The optimum clump diameter range for higher IA production was 0.40-0.50 mm. (4) When the clump diameter was controlled at 0.45 mm by manipulating the mechanical stress in a 7 L fermentor, the yield of IA on DCW and yield of glucose on DCW were increased by 25.1% and 16.3%, respectively. The results presented in this study provide a potential approach for further enhancement of metabolite production by filamentous fungi.

정전 분무법을 이용하여 제조된 Fe-Cr-Al 분말 다공체 금속의 고온 산화에 미치는 소결 온도의 영향 (Effect of Sintering Temperature on the High Temperature Oxidation of Fe-Cr-Al Powder Porous Metal Manufactured by Electrospray Process)

  • 오재성;공영민;김병기;이기안
    • 한국분말재료학회지
    • /
    • 제19권6호
    • /
    • pp.435-441
    • /
    • 2012
  • A new manufacturing process of Fe-Cr-Al powder porous metal was attempted. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on PU (Polyurethane) foam through the electrospray process. And then degreasing and sintering processes were conduced. In order to examine the effect of sintering temperature in process, pre-samples were sintered for two hours at temperatures of $1350^{\circ}C$, $1400^{\circ}C$, $1450^{\circ}C$, and $1500^{\circ}C$, respectively, in $H_2$ atmospheres. A 24-hour TGA (thermo gravimetric analysis) test was conducted at $1000^{\circ}C$ in a 79% $N_2$+21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing sintering temperature (2.57% oxidation weight gain at $1500^{\circ}C$ sintered specimen). The high temperature oxidation mechanism of newly manufactured Fe-Cr-Al powder porous metal was also discussed.

정밀 강설량계 개발을 위한 연구 (A Study on the Development of a High Resolution Snow Gauge)

  • 이부용
    • 한국농림기상학회지
    • /
    • 제8권4호
    • /
    • pp.270-274
    • /
    • 2006
  • 본 연구에서 고안 설계한 적설 관측용 수위 센서는 야외에서 일 변화량은 0.1 mm 내외의 적은 양의 오차를 기록하여 강설관측 센서로 적합한 것으로 판명되었으며, 실내 검정 결과 기상청에서 요구하고 100 mm의 강수 검정범위에 대해서 1%이하의 신뢰성 있는 검정결과를 나타내어 강설량 관측에 적합한 것으로 판명되었다. 또한 $-20^{\circ}C$의 테스트에서도 0.1 mm에 해당하는 아주 작은 변화 값을 타나내어 겨울철 야외환경에도 적합한 것으로 판명되었다. 깔때기가 없으며 수수구의 크기에 제한을 받지 않는 새로운 강수 관측구조는 적은 양의 강설관측이 가능하여 겨울철 예보에 필요한 레이다. 영상과 위성 영상에 의한 강설 연구와 해석에 많은 도움을 줄 수 있을 것이다. 또한 적설상당수량 관측이 가능하여 수자원 분야의 연구에도 많은 도움이 될 수 있다. 부동액을 사용하므로 고체 상태의 강설에 대해서 직접 관측이 가능하여 강설 관측에 있어 문제점으로 지적이 되고 있는 신적설 관측의 어려움을 해결할 수 있으며, 추후 야외 관측용 모델을 제작하여 야외 환경에서 여타 장비들과 비교 실험을 통해서 성능을 검정하고 개선할 계획이다.

침강지내 비점성하상의 세굴 지배인자에 대한 실험적 해석 (Experimental Analysis of the Parameters Governing Scour in Plunge Pool with Cohesionless Bed Material)

  • 손광익;이원환;조원철
    • 대한토목학회논문집
    • /
    • 제13권4호
    • /
    • pp.123-129
    • /
    • 1993
  • 기연구 발표된 수많은 세굴 예측공식들은 여수로나 관암거 하류의 침강지내에서 발생하는 실제 세굴 깊이나 세굴 방지에 필요한 최소 침강지수심을 예측하기가 불가능할 정도로 광범위한 예측치를 나타내고 있다. 이같은 광범위한 예측 세굴 깊이는 대부분 세굴 지배인자에 대한 심도깊은 연구의 부족에 따른 인자들의 지나친 단순화에 기인하고 있다는 것을 문헌조사를 통하여 알수 있었다. 따라서 본 연구는 실험을 통하여 세굴을 지배하는 주요 지배인자들의 영향을 검토하였다. 문헌조사로부터 찾을 수 있었던 세굴 지배인자는 침강지수심, ?의 크기와 폭기정도, 하상입자의 입도분포 및 노출도 등이었으며 본 연구에서는 ?의 수리학적 특성 및 침강지 수면에서의 입사각, 침강지의 기하학적 특성, 그리고 ?의 크기 및 하상입자 크기의 영향을 중점적으로 검토하였다. 그 결과 침강지 수심과 ?의 수리학적 특성 및 기하하적 특성, 그리고 하상입자의 크기 등이 세굴을 지배하는 주요인자임을 알 수 있었다. 특히 기존 실험연구들의 광범위한 세굴 예측치는 ?의 크기와 하상입자의 크기에 대한 기하학적 상사법칙을 무시함에 기인하였음을 발견하였다.

  • PDF

Development of equipment for tumor cauterization

  • Hoshino, Hirokazu;Ochiai, Makoto;Sakasegawa, Aya;Hayakawa, Yoshinori
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.474-477
    • /
    • 2002
  • Equipment to cauterize tumors by an electrically heated Kanthal wire is under development. The wire( alloy of iron, chromium and Aluminum) keeps sufficient strength up to 1400 degrees in Celsius. Although AC 50Hz current source is used in the prototype experiment, RF current will be used in future. The diameter of the Kanthal wire was 0.3 mm which was connected to Kanthal wire of 0.8 mm. The thicker wire was used as a leading wire. The possibility of application of the heating wire in combination with an ultrasound endoscope was determined, where ultrasound endoscope is to be used to monitor the location on the wire and an extent of a tumor in digestive organs. This procedure requires the wire to be applied inside ultrasound transmitting media. First, the wire was applied in the degassed water in which a chicken liver sample was submerged. The wire, however, burned out in water soon after it became red-hot at 12 A. The reason is that large current is required for the wire to become red-hot due to strong convection. Starch paste of 3 weight percent was employed instead of water. This made the wire red-hot approximately at 6 A, showing the increased viscosity of the starch decreased the convection and the wire was cover by the steam. The liver sample was cauterized successively, while the location of the wire and the liver was monitored by an ultrasound diagnosis equipment outside the plastic vessel of the starch paste.

  • PDF

Control of Both Foam and Dissolved Oxygen in the Presence of a Surfactant for Production of $\beta$-Carotene in Blakeslea trispora

  • Kim, Seon-Won;Lee, In-Young;Jeong, Jae-Cheol;Lee, Jung-Heon;Park, Young-Hoon
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권5호
    • /
    • pp.548-553
    • /
    • 1999
  • A production of $\beta-Carotene$was attempted in a fed-batch culture of Blakeslea trispora by controlling both foam and dissolved oxygen in the presence of surfactant, Span 20. Results obtained from the shake flask cultures indicated that a high concentration of dissolved oxygen was needed for both cell growth and $\beta-Carotene$ synthesis, and the optimal concentration of glucose was found to be in the range of 50-100 g/l. In order to maintain the dissolved oxygen concentration level at higher than 50% of air saturation, pure oxygen was automatically sparged into the medium with air. Foam was controlled by bypassing air from the submerged aeration to the headspace in response to the foam that was caused by Span 20. High agitation speed was found to be detrimental to the cell growth due to shear damage, even though it provided sufficient dissolved oxygen. On the other hand, a low aeration speed caused stagnant regions in the fermentor because of improper mixing. Thus, for the fed-batch operation, agitation speed was increased gradually from 300 to 700 rpm to prevent cell damage at the initial stage of fermentation and to give efficient mixing for a viscous culture broth as the culture proceeded. By controlling dissolved oxygen and foam, a high concentration of $\beta-Carotene$otene (1,190 mg/l) was obtained in 6 days of the fed-batch culture of B. trispora with 2.5% of the dry cell weight, which was approximately 5 times higher than that of the batch cultures.

  • PDF

고밀도 뱀장어 양식수조의 질병대책 (Fish Diseases and Their Control in High Density Culture of Eel)

  • 전세규
    • 한국수산과학회지
    • /
    • 제16권2호
    • /
    • pp.103-110
    • /
    • 1983
  • The main purpose of the present study is to evaluate a revolving plate type biofilter system for mass culture of eel(Anguilla japonica) based on the experimental rearing for 120 days (Oct. 1982-Feb. 1983). Water quality changes, growth efficiency of fish and fish disease treatment were critically evaluated. A revolving plate type biofilter system was designed(Fig. 1). The system consisted of a glass tank (150 l), a revolving plate biofilter and a settling tank(150 l). The biofilter consisted of 60 submerged quadriangular plates ($28{\times}37$ cm) and 30 revolving plates (32 cm diameter) for a total of 19.0 $m^2$ of surface area. The revolving plates were made to rotate 10 time per minute, The total water volume of the rearing system were 300 l, and everyday 1/3 of the total water volume were changed with freshly prepared water. In the rearing system a total of 2 kg of eel (1,500 individuals, mean weight:1.3 g) were reared fed on the pellet feed and the dough feed. The growth efficiency were much better for the pellet feed (FC: 1.79) compared to the dough feed (FC: 3.56). During the experimental rearing water quality control was satisfactory. Total ammonia concentrations were 0.38-0.59 ppm and nitrite concentration were 0.83-1.19 ppm. On the other hand alkalinity decreased from 176ppm just after the water change to 17ppm just before the water change. The low alkaline condition was compensated by the regular change of water. Epidemics of parasitic gill-flocks (Pseudodactvlogylus sp.) was observed, and they were easily eliminated by the treatment of DDVP (1.0 ppm). Trichodina sp. and Costia sp. were observed, and they were also controlled by the treatment of potassium permanganate (4.0 ppm).

  • PDF