• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.435-444
• /
• 2006

본 논문은 AREA법을 사용하는 줄눈 콘크리트포장의 평가에 3차원 유한요소모델을 사용하는 경우 나타나는 특성을 조사하는데 목적이 있다. 이를 위해 실제 콘크리트포장을 거동을 반영할 수 있는 3차원 유한요소모델을 구축하였고 2차원 모델과 비교한 후 민감도 분석을 수행하였다. ILLISLAB을 사용한 2차원 모델과 비교하였고 하중형태의 영향 보다 하중재하 지점의 자체수축과 기층모델에 따른 영향을 더 많이 받는 것으로 나타났다. 3차원 모델에서 비선형 온도구배를 선형 온도구배로 변화시키는 경우 발생하는 영향을 조사하였고 큰 차이를 보이지는 않았으나 지반 탄성계수가 작아질수록 더 많은 차이를 보였다. 동적하중에 의한 처짐을 구하였고 정적하중에 의한 처짐과 비교한 결과 낮은 지반 탄성계수에서는 동적하중에 의한 처짐이 작게 나타났으나 높은 지반 탄성계수에서는 동적하중에 의한 처짐이 크게 나타났다. 동적하중에 의한 처짐 이력을 구하고 AREA법을 이용하여 동적지지력과 탄성계수를 역산하였으며 이를 정적 처짐에 의한 결과와 비교하였다. 그 결과 동적지지력의 경우 정적 해석에 의한 값보다 동적해석에 의한 값이 낮게 나타났고 탄성계수의 경우 반대의 경향을 나타내어 현장에서 AREA법을 사용하는 경우 나타나는 평가결과의 특성을 설명하는 것으로 판단되었다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.49-58
• /
• 2017

PURPOSES : The objective of this study is to develop a simple regression model in designing the asphalt concrete (AC) overlay thickness using the Mechanistic-empirical pavement design guide (MEPDG) program. METHODS : To establish the AC overlay design equation, multiple regression analyses were performed based on the synthetic database for AC thickness design, which was generated using the MEPDG program. The climate in Seoul city, a modified Hirsh model for determining dynamic modulus of asphalt material, and a new damaged master curve approach were used in this study. Meanwhile, the proposed rutting model developed in Seoul city was then used to calibrate the rutting model in the MEPDG program. The AC overlay design equation is a function of the total AC thickness, the ratio of AC overlay thickness and existing AC thickness, the ratio of existing AC modulus and AC overlay modulus, the subgrade condition, and the annual average daily truck traffic (AADTT). RESULTS : The regression model was verified by comparing the predicted AC thickness, the AADTT from the model and the MEPDG. The regression model shows a correlation coefficient of 0.98 in determining the AC thickness and 0.97 in determining AADTT. In addition, the data in Seoul city was used to validate the regression model. The result shows that correlation coefficient between the predicted and measured AADTT is 0.64. This indicates that the current model is more accuracy than the previous study which showed a correlation coefficient of 0.427. CONCLUSIONS:The high correlation coefficient values indicate that the regression equations can predict the AC thickness accurately.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.552-561
• /
• 2006

The purpose of this study is to propose a pavement analysis system which considers dynamic effects resulted from the various vehicle speeds. Vehicle loading effects were estimated by loading frequency and dynamic loads under various vehicle speeds. In addition, a proposed analysis model takes the non-linear temperature using a predictive model for dynamic modulus in asphalt layer and the non-linear stress in the unbound material. To examine adequacy of existing multi-layer elastic analysis of non-linear temperature in asphalt layer and non-linear stress conditions in unbound material, this study divided layers of asphalt pavement structures with 10 layers in asphalt, 2 layers in subbase and 1 layer in subgrade. In order to verify the pavement analysis system that considers various speeds, deflections of pavement calculated using ABAQUS, a three dimensional finite element program, were compared with the results of field tests under various speeds.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.145-150
• /
• 2006

An experiment with the objective of providing guidelines for joint depth determination and timing of contraction joint sawcutting to avert uncontrolled cement concrete pavement cracking has been conducted. Theoretical analysis and laboratory tests were performed to help in understanding and analyzing the field observation. Using two-dimensional elastic fracture mechanics, the influence of several parameters on crack propagation was delineated by a parametric study, involving initial notch ratio, joint spacing, Young's modulus and thermal expansion coefficient of concrete, temperature gradient, and modulus of subgrade reaction. Bimaterials made of rock plus cement mortar and rock plus polymer mortar were applied to the concrete in a field test section, and they were subjected to fracture tests. These tests have shown that fracture mechanics is a powerful tool not only in judging the quality of the jointed cement concrete pavement but also in providing a criterion for crack propagation and delamination. Based on fracture mechanics, a method is proposed to determine the joint depth, sawcut timing, and spacing of the jointed cement concrete pavement. This method has successfully been applied to a test section in Seohaean expressway. This study also summarizes the research results obtained from a field test for jointed plain concrete pavement, which was also carried out on the Seohaean expressway.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.75-83
• /
• 2009

안정처리된 도로 지반재료는 현장에서 환경적인 요인으로 인하여 내구성능은 여전히 구조적인 성능과 더불어 평가가 요구되고 있다. 이에 본 논문에서는 국내에서 대표적으로 활용하고 있는 기층과 노상재료를 활용하여 다양한 안정제 종류와 함유량을 달리하여 공시체를 제작하였고 동결-융해 및 습윤-건조하여 여러 조건의 반복재하 회복탄성계수시험을 실시하여 내구성능 및 특성을 파악하였다. 또한 결과에 기초하여 안정처리된 지반재료에 대한 회복탄성계수 예측모델을 살펴보고 모델계수의 범위를 평가후 문헌의 자료와 비교하였다.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.757-770
• /
• 2022

In this paper, the vibration of a moderately thick plate to a moving mass is investigated. Pasternak foundation with a variable subgrade modulus is considered to tackle the shortcomings of Winkler model, and an analytical-numerical solution is proposed based on the eigenfunction expansion method. Parametric studies by using both CPT (Classical Plate Theory) and FSDT (First-Order Shear Deformation Plate Theory) are carried out, and, the differences between them are also highlighted. The obtained results reveal that utilizing FSDT without considering the rotary inertia leads to a smaller deflection in comparison with CPT pertaining to a thin plate, while it demonstrates a greater response for plates of higher thicknesses. Moreover, it is shown that CPT is unable to properly capture the variation of the plate thickness, thereby diminishing the accuracy as the thickness increases. The outcomes also indicate that the presence of a foundation contributes more to the dynamic response of thin plates in comparison to moderately thick plates. Furthermore, the findings suggest that the performance of the moving force approach for a moderately thick plate, in contrast to a thin plate, appears to be acceptable and it even provides a much better estimation in the presence of a foundation.

• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.113-126
• /
• 1995

점성토의 변형특성을 연구하기 위하여 공진주(RC)시험과 비틀전단(75)시험을 저변형률 및 중간 변형률하에서 실시하여 변형률의 크기,진동주파수,하중반복회수의 영향을 살펴보았다. 소 성지수가 이들의 영향을 평가하는데 중요한 변수임을 알 수 있었다. 실험에 사용된 시료로는 불 교란 실트 및 점토와 실험실에서 다져진 노상토를 사용하였다. 선형한계변형률이하에서 전단탄 성계수는 하중반복회수와 변형률의 크기에 영향을 받지 않았으며, RC시험에서 얻은 최소감소비가 1.1%에서 1.7%영역에서 존재하였다. 점성토의 선형한계변형률은 구속압과 소성지수에 따라 증가하였으며 사질토와 비교하여 넘은 선형영역을 보였다. 반복한계변형률이상의 변형률하에서는 전단탄성계수는 하중반복회수에 따라 감소하였지만 감쇠비는 영향을 받지 않았다. 진동주파수의 영향에 의해 RC시험에서 얻은 점성토의 전단탄성계수와 감쇠비는 RC시험결과보다 컸다. 전단탄성계수는 진동주파수의 대수증가에 따라 선형적으로 증가하였고 감쇠비의 경우 2Hz이하의 저주파수영역에서는 영향을 받지 않았다.

• 한국지반신소재학회논문집
• /
• 제10권3호
• /
• pp.33-41
• /
• 2011

본 논문에서는 국내 건설현장 29개 지점에서 국내 철도노반 다짐품질관리 방법인 반복평판재하시험과 LFWD(Light Falling Weight Deflection)에서 구한 변형률계수(Ev2)와 변형계수($E_{LFWD}$)에 대하여 응력보정을 통해 자갈재료와 사질토에 대하여 상관성을 비교하였다. 실험결과 대부분 다짐품질관리 기준을 만족하고 있으며, 입상재료의 경우 관리기준치에 약 3배이상 값을 나타내었다. 두 시험방법에 따른 상관성은 토사의 경우에는 서로 상관성이 높은 것으로 나타났지만, 강성이 상대적으로 큰 입상재료의 경우 두 시험간의 상관성이 적은 것으로 나타났다. 또한, 시험방법 별로 탄성계수를 구하여 응력상태를 보정한 후 회귀 분석한 결과 응력 보정하지 않는 조건보다 상관성이 더 높게 나타났다.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.51-62
• /
• 2006

Differential transform method (DTM) for free vibration analysis of both ends simply supported beam resting on elastic foundation is suggested. The fourth order partial differential equation for free vibration of the beam resting on elastic foundation subjected to bending moment, shear and axial compressive load is obtained by using Winkler hypothesis and small displacement theory. It is assumed that the material is linear-elastic, and that axial load and modulus of subgrade reaction to be constant. In the analysis, shear and axial load effects are considered. The frequency factors of the beam are calculated by using DTM due to the values of relative stiffness; the results are presented in graphs and tables.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.7-12
• /
• 1992

The variable node plate bending element, ie, the element with one or two additional mid-side nodes is used in the analysis of mat foundation to generate the nearly ideal grid model in which more nodes are defined near the column location. The plate bending element used in this study is the one based on Mindlin/Reissner plate theory with substitute shear strain field and the nodal stresses of that element are obtained by the local smoothing technique. The interaction of the soil material with the mat foundation is modeled with Winkler springs connected to the nodal points in the mat model. The vertical stiffness of the soil material are represented in terms of a modulus of subgrade reaction and are computed in the same way as to the computation of consistent nodal force of uniform surface loading. Several mesh schemes were proposed and tested to find the most suitable scheme for mat foundation analysis.