• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.431-439
• /
• 2014

The two-phase interleaved bidirectional DC-DC converter (TIBDC) is a very attractive solution to problems related to battery energy storage systems. However, the hard-switching TIBDC increases the switching loss and electromagnetic interference noise when the switching frequency increases. Hence, a soft-switching technique is required to overcome these disadvantages. In this study, a novel TIBDC with zero-voltage transition (TIBDC-ZVT) is proposed. Soft switching in the boost and buck main switches is achieved through a resonant cell that consists of a single resonant inductor and four auxiliary switches. Given its single resonant inductor, the proposed TIBDC-ZVT has a reduced size and can easily be implemented. The validity of the proposed TIBDC-ZVT is verified through experimental results.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.517-526
• /
• 2015

Among the various image fusion or pan-sharpening methods, those wavelet-based methods provide superior radiometric quality. However, the fusion processing is not only simple but also flexible, since many low- and high-frequency sub-bands are often produced in the wavelet domain. To address this issue, a novel DT-CWT (Dual-Tree Complex Wavelet Transform) proportional to the fusion method by a WZP (Wavelet Zero-Padding) is proposed. The proposed method produces a single high-frequency image in the spatial domain that is injected into the LRM (Low-Resolution Multispectral) image. Thus, a wavelet domain fusion can be simplified to spatial domain fusion. In addition, in the proposed DT-CWTP (DT-CWT Proportional) fusion method, it is unnecessary to decompose the LRM image by adopting WZP. The comparison indicates that the proposed fusion method is nearly five times faster than the DT-CWT with SW (Substitute-Wavelet) fusion method, meanwhile simultaneously maintaining the radiometric quality. The conducted experiments with WorldView-2 satellite images demonstrated promising results with the computation efficiency and fused image quality.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.64-70
• /
• 2011

본 논문에서는 LED조명의 휘도조절을 위해 PWM 휘도조절시 발생하는 LED전류의 과도 상태제거를 위한 전류제어 기법을 제안한다. 제안된 LED전류 제어 기법은 과도상태가 존재하지 않으므로 휘도조절 신호의 동작 시비율이 매우 작은 영역에서도 전류 제어를 통해 낮은 휘도를 정밀하게 표현할 수 있다. 또한 전류의 Overshoot이 발생하지 않으므로 휘도를 일정하게 유지할 수 있는 장점을 가진다. 본 논문에서는 제안된 LED전류 제어 기법의 동작원리를 설명하고, PSIM을 이용한 모의실험 및 실제 46인치 LCD TV의 시작품 제작을 통해 제안된 기법의 타당성 및 우수성을 검증한다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.8-8
• /
• 2003

Electron-phonon interaction plays a significant role in forming of colossal magnetoresistance effect (CMR). Polaron formation was observed by neutron diffraction and by extended X-ray absorption fine structure (EXAFS) analysis. Local probe as given by the EXAFS is a useful method to study the polaronic charge and its dependence on temperature and ions size. Here we present the EXAFS study of polaronic charge in La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ compositions. The single phase La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ manganites (x=0; 0.03; 0.06, ..., 0.3) were prepared by ceramic technology [1]. The Curie temperature was determined by extrapolation of the temperature dependence of the magnetization (down to zero magnetization). EXAFS experiments were carried out at the 7C EC beam line of the Pohang Light Source (PLS) in Korea. The atomic pair distribution functions (PDF) were obtained by re-regularization method [2] from filtered spectra. The PDF for the x=0.3 sample showed a single peak function and for x=0.0, 0.03, 0.06, 0.09, 0.12 compositions were asymmetric in agreement with a small Jahn-Teller elongation of two (short and long) bonds of the MnO/sub 6/ octahedron. Dispersion, σ/sub Min-O//sup 2/, and asymmetry, σ/sub Min-O//sup 3/, of the Mn-O bond distances varied significantly with x and showed a maximums at x=0.09. The maximum of σ/sub Min-O//sup 2/ is caused by increase of dynamic rms displacements of the Mn-O distances near the T/sub C/. The observed x dependence of σ/sub Min-O//sup 3/ reflects the reduction of charge carriers mobility at approaching to T/sub C/ from low as well as high temperatures.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.207-210
• /
• 2012

The preparation of $Sm_2O_3$ doped $CeO_2$ in Igepal CO-520/cyclohexane reverse micelle solutions has been studied. In the present work, we synthesized nanosized $Sm_2O_3$ doped $CeO_2$ powders by reverse micelle process using aqueous ammonia as the precipitant; hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase, and poly (xoyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by Thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), and Transmission electron microscopy (TEM). The crystallite size was found to increase with increase in water to surfactant (R) molar ratio. Average particle size and distribution of the synthesized $Sm_2O_3$ doped $CeO_2$ were below 10 nm and narrow, respectively. TG-DTA analysis shows that phase of $Sm_2O_3$ doped $CeO_2$ nanoparticles changed from monoclinic to tetragonal at approximately $560^{\circ}C$. The phase of the synthesized $Sm_2O_3$ doped $CeO_2$ with heating to $600^{\circ}C$ for 30 min was tetragonal $CeO_2$. This study revealed that the particle formation process in reverse micelles is based on a two step model. The rapid first step is the complete reduction of the metal to the zero valence state. The second step is growth, via reagent exchanges between micelles through the inter-micellar exchange.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.645-654
• /
• 1994

광촉매 산화반응의 기본 운영조건-재순환을 속도 275 mL/min, 산소 공급량 2LPM, $UV+TiO_2+H_2O_2$(500 mg/l)을 새로운 광촉매 산화반응에 의한 유기물질 분해 수처리 공정으로 적용하였다. 탁도와 부유물질의 농도가 증가함에 따라 탁도 10 NTU-부유물질 농도 29 mg/l까지는 페놀분해가 감소하지 않고 약간 증가하는 추세를 보였고, 탁도 50 NTU-부유물질 농도 170 mg/l까지는 어느정도 페놀분해가 감소하고 있으나 탁도와 부유물질이 없는 경우와 비슷한 정도로 페놀 분해가 이루어졌다. 페놀 분해율은 유입페놀 농도가 증가할수록 감소하였다. 본 연구에서 이용한 $UV+TiO_2+H_2O_2$ 광촉매 산화반응은 정수처리공정의 고도산화법, 생물학적 폐-하수 처리의 후처리 공정으로 이용 가능할 것으로 판단된다.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.25-29
• /
• 2003

자외선과 전자파를 동시에 차단하는 선글라스렌즈를 제작하기 위하여 유리가판 위에 자성재료인 페라이트에 Ni를 여러 가지 조성비로 첨가한 니켈페라이트 박막 $Ni_xFe_{3-x}O_4$을 페라이트 도금법으로 제작하였다. 이들은 모두 스피넬 구조의 단일상임을 확인할 수 있었으며 육안으로 관찰할 때 거울면과 같은 광택을 가졌으며, 손톱으로 긁었을 때 흠집이 생기지 않는 강도를 보였다. 니켈페라이트는 400nm 부근에서부터 급격히 투과율이 떨어져 자외선을 차단하는데 효과적인 양상을 보이고 있으며 그 중에서 x = 0.09의 Ni 조성비가 자외선 차단효과가 가장 좋은 깃으로 나타났다. 이는 타사제품과 비교하여 자외선 차단효과는 크게 떨어지지 않으므로, 전자파 차단효과가 있는 $Ni_xFe_{3-x}O_4$ 페라이트를 코팅한 선글라스를 착용함으로서 유해전자파와 자외선을 동시에 차단하는 효과를 얻을 수 있을 것이다.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.357-362
• /
• 2017

Among the lithium metal oxides for asymmetric hybrid supercapacitor, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. The pulverized LTO powder was observed to show the enhanced capacity from 120 mAh/g to 156 mAh/g at C-rate (10, 100 C). Hybrid supercapacitor module(48V, 416F) was fabricated using an asymmetric hybrid capacitor with a capacitance of 7500F. As a result of the measurement of C-rate characteristics, the module shows that the discharge time is drastically reduced at more than 50C, and the ESR and voltage drop characteristics are increased. The energy density and power density were reduced under high C-rate conditions. When designing asymmetric hybrid supercapacitor module, the C-rate and ESR should be considered As a result of measuring the 5 kw UPS, it was discharged at the current of 116A~170A during the discharge in the voltage range of 48V~30V, and the compensation time at discharge was measured to be about 33.2s. Experimental results show that it can be applied to applications related to stabilization of power quality by applying hybrid supercapacitor module.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.549-563
• /
• 2022

Continuous global warming is causing ecosystem destruction and direct damage to human life. The main cause of global warming is greenhouse gases, which account for more than 90 % of carbon dioxide. The leaders of each country signed the Paris Agreement at the United Nations Convention on Climate Change (UNFCCC) to reduce greenhouse gas emissions. Currently, the total amount of CO₂ emitted from South Korea is 664.7 million tons as of 2018, ranking eighth in the world. 37 % of South Korea's total CO₂ emissions come from the construction & building field, especially the cement production, which is a construction material. Carbon reduction technologies can be largely divided into four types: carbon reduction (CC), carbon reduction and storage technology (CCS), carbon reduction and utilization technology (CCU), and carbon reduction, storage and utilization technology (CCUS). Overseas, CCUS technology is mainly applied to reduce and store CO₂ emitted from construction and construction field. A technology for permanently storing CO₂ through mineralization by capturing CO₂ and utilizing CO₂ into a cement production process was developed, and this technology is applied to the entire cement industry. However, the development of CCUS technology applicable to the cement industry is still insignificant in South Korea. In this study, carbon dioxide reduction technology and methods for reducing carbon dioxide emitted during the cement manufacturing process, which is the main component of concrete mainly used in civil engineering construction, were investigated. Overseas, it has reached the commercialization stage beyond the demonstration stage as a way to reduce carbon dioxide by vomiting carbonation reactions. Accordingly, if carbon dioxide reduction plan technology generated during cement manufacturing is developed based on domestic technology differentiated from foreign technology, it is expected to contribute one more step to the carbon neutrality policy.

• 천문학회보
• /
• 제46권2호
• /
• pp.49.1-49.1
• /
• 2021

We carried out simultaneous monitoring observations of five maser lines, H₂O (22 GHz), SiO 𝝊 =1, 2, J =1-0 (43.1, 42.8 GHz), and SiO 𝝊 =1, J=2-1, J =3-2 (86.2, 129.3 GHz), toward the Mira variable star WX Serpentis with the 21-m antennas of the Korean VLBI Network (KVN) in 2009-2021 (~12 years). Most spectra of the H₂O maser are well separated into two parts of two blue- and one redshifted features within ± 10 km s-1 of the stellar velocity. All detected SiO masers are generally concentrated within ± 5 km s-1 of the stellar velocity, and sometimes appear split into two components. Overall, the profiles of SiO and H₂O masers detected in WX Serpentis illustrate typical characteristics of the Mira variable. In addition, flux variations of both SiO and H₂O masers are well correlated with the optical light curve of the central star, showing a phase lag of ~ 0.1 for SiO masers and ~ 0.2 for H₂O maser. This phenomenon is considered to be the direct effect of propagating shock waves generated by the stellar pulsation, because SiO and H₂O masers are sequentially distributed at different positions with respect to the central star. In addition, we analyzed long-term trends and characteristics of maser velocities, maser ratio, and the velocity extents (the full width at zero power; FWZP). We also investigated a spectral energy distribution (SED) ranging from 1.2 to 240 ㎛ obtained using several infrared data: 2MASS, WISE, IRAS, ISO, COBE DIBRE, RAFGL, and AKARI (IRC and FIS). From the IRAS LRS and ISO SWS spectra of this star, we identified 9.7 and 12 ㎛ silicate emission features consistent with the SE6 spectrum model, corresponding to the typical AGB phase.