• 한국표면공학회지
• /
• 제49권3호
• /
• pp.316-321
• /
• 2016

To study emission characteristics for dual-emission tandem organic light emitting display (OLED), we fabricated blue fluorescent OLED according to thickness variation of $MoO_x$ as charge generation layer and Al as cathode. The bottom emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness showed threshold voltage of 9, 7, 9 V, maximum current emission efficiency of 19.32, 23.18, 15.44 cd/A and luminance of $1,000cd/m^2$ at applied voltage of 17.6, 13.2, 16.5 V, respectively. The top emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness indicated threshold voltage of 13, 10, 13 V, maximum current emission efficiency of 0.17, 0.23, 0.16 cd/A and luminance of $50cd/m^2$ at applied voltage of 22.6, 16.5, 20.1 V, respectively. In case of thicker or thinner than $MoO_x$ of 3 nm, the emission characteristics were decreased because of mismatching of electron and hole in emission layer. The bottom emission characteristics of OLED with Al 15, 20, 25 nm thickness showed threshold voltage of 8, 8, 7 V, maximum current emission efficiency of 18.42, 22.98, 23.18 cd/A and luminance of $1000cd/m^2$ at applied voltage of 16.2, 13.9, 13.2 V, respectively. The reduction of threshold voltage and increase of maximum current emission efficiency are caused by the increase of current injection according to increase of Al cathode thickness. The top emission characteristics of OLED with Al 15, 20, 25 nm thickness indicated threshold voltage of 7, 7, 8 V, maximum emission luminance of 371, 211, $170cd/m^2$, respectively. The top emission OLED of Al cathode with 15 nm thickness showed maximum luminance and it decreased at thickness of 20 nm. These phenomena are caused by the decrease of intensity of emitted light by reduction of optical transmittance according to increase of Al cathode thickness.

• 응용통계연구
• /
• 제24권2호
• /
• pp.347-357
• /
• 2011

본 논문은 M/$E_n$/1 큐에서 overshoot에 대한 근사식을 제안한다. overshoot은 큐의 작업부하량과정이 어떤 한계점을 처음으로 초과한 순간에 그 초과량을 의미하는데, overshoot의 분포 및 1차, 2차 적률은 큐의 최적화문제를 푸는데 중요한 역할을 한다. 본 논문에서는 그동안 이루어진 overshoot의 분포에 대한 이론적인 결과를 바탕으로 하여 overshoot의 분포를 고객의 서비스시간의 분포와 지수분포의 선형결합으로 표현하는 근사식을 제안한다. 그리고 제안된 근사식의 정확성을 확인하기 위하여 시뮬레이션을 통해 구한 overshoot의 분포와 비교한다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.156-161
• /
• 2015

In this paper, we present simulation results obtained using SILVACO TCAD tools for a 3-D silicon on insulator (SOI) n-FinFET structure with a gate length of 8 nm at 300K. The effects of variations of the device’s key electrical parameters, such as threshold voltage, subthreshold slope, transconductance, drain induced barrier lowering, oncurrent, leakage current and on/off current ratio are presented and analyzed. We will also describe some simulation results related to the influence of the gate work function variations on the considered structure. These variations have a direct impact on the electrical device characteristics. The results show that the threshold voltage decreases when we reduce the gate metal work function Φ_m. As a consequence, the behavior of the leakage current improves with increased Φ_m. Therefore, the short channel effects in real 3-D FinFET structures can reasonably be controlled and improved by proper adjustment of the gate metal work function.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.105-109
• /
• 2015

We studied emission characteristics of blue fluorescent multi-tandem OLEDs using $Al/MoO_x$ as charge generation layer(CGL). Threshold voltage for 2, 3, 4, and 5 units tandem OLEDs was 8, 11, 14 and 18 V, respectively. The threshold voltage in multi-tandem OLEDs was lower than multiple of 4 V for the single OLED. Maximum current efficiency and maximum quantum efficiency of single OLED were 7.6 cd/A and 5.5%. Maximum current efficiency for 2, 3, 4, and 5 units tandem OLEDs was 22.6, 31.4, 41.2, and 46.6 cd/A, respectively. Maximum quantum efficiency for 2, 3, 4, and 5 units tandem OLEDs was 11.8, 15.8, 21.8, and 25.6%, respectively. The maximum current efficiency and maximum quantum efficiency in multi-tandem OLEDs were higher than multiple of those for the single OLED. The intensity for 508 nm peak was changed and the peak wavelength was red shift by increase of tandem unit in electroluminescent emission spectra. These phenomena can be caused by micro-cavity effect with increasing of organic layer thickness.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.292-294
• /
• 2016

이황화몰리브덴을 활용한 전계효과트랜지스터(Field Effect Transistor)는 채널 물질의 우수한 특성으로 차세대 저전력 고성능 스위치와 광전소자로 주목받고있다. Underlap 게이트 구조에서 게이트 길이(L_G), 절연체 두께(T), 절연체 상대유전율(${\varepsilon}_r$)에 따라 변화하는 소자특성을 분석하여 저전력 고성능 $MoS_2$ 전계효과트랜지스터를 위한 게이트 구조 최적화방법을 모색하였다. EDISON simulator 중 Tight-binding NEGF 기반 TMD FET 소자 성능 및 특성 해석용 S/W를 활용하여 게이트 구조에 따른 게이트 전압 - 드레인 전류 상관관계(transfer characteristic)를 얻고, Y-function method를 이용하여 채널 유효전하이동도(Effective Mobility), Sub-threshold Swing, on/off 전류비(on/off current ratio)를 추출하여 비교 분석하였다. 시뮬레이션으로 추출한 소자의 최대 채널 유효전하이동도는 $37cm^2V^{-1}s^{-1}$, on/off 전류비는 $10^4{\sim}10^5$, Sub-threshold Swing은 ~38mV/dec 수준을 보였다.

• 농업과학연구
• /
• 제48권4호
• /
• pp.843-853
• /
• 2021

The objectives of this paper were to simply estimate soil loss levels as caused by wind in reclaimed tidal flat land (RTFL) and the threshold wind velocity in the RTFL. For this experiment, RTFL located at Haenam Bay was selected and a total of 150 soil samples were collected at the Ap horizon from the five soil series. The particle distribution curves, including the limit of the non-erodible particle size (D > 0.84 mm) for each Ap horizon soil, show that the proportions of non-erodible particle sizes that exceeded 0.84 mm were 4.3% (Taehan, TH), 8.9% (Geangpo, GP), 0.5% (Bokchun, BC), 1.6% (Poseung, PS) and 1.4% (Junbook, JB), indicating that the amount of non-erodible soil particles increased with an increase in the sand content. The average monthly, daily and instantaneous wind velocities were higher than the threshold friction velocity (TFV) calculated according to the dynamic velocity (V_d) by Bagnold, while the average monthly wind velocity was lower than those of the TFV suggested by the revised wind erosion equation (RWEQ) and wind erosion prediction system (WEPS). The susceptible proportions of erodible soil particles from the Ap horizon soil samples from each soil series could be significantly influenced by the proportion of sand particles between 0.025 and 0.5 mm (or 0.84 mm) in diameter regardless of the threshold wind velocity. Thus, further investigations are needed to estimate more precisely soil erosion in RTFL, which shows various soil characteristics, as these estimations of soil loss in the five soil series were obtained only when considering wind velocities and soil textures.

• ETRI Journal
• /
• 제31권2호
• /
• pp.121-128
• /
• 2009

In this paper, we describe a fixed-threshold sequential minimal optimization (FSMO) for structured SVM problems. FSMO is conceptually simple, easy to implement, and faster than the standard support vector machine (SVM) training algorithms for structured SVM problems. Because FSMO uses the fact that the formulation of structured SVM has no bias (that is, the threshold b is fixed at zero), FSMO breaks down the quadratic programming (QP) problems of structured SVM into a series of smallest QP problems, each involving only one variable. By involving only one variable, FSMO is advantageous in that each QP sub-problem does not need subset selection. For the various test sets, FSMO is as accurate as an existing structured SVM implementation (SVM-Struct) but is much faster on large data sets. The training time of FSMO empirically scales between O(n) and O($n^{1.2}$), while SVM-Struct scales between O($n^{1.5}$) and O($n^{1.8}$).

• 한국세라믹학회지
• /
• 제49권2호
• /
• pp.173-178
• /
• 2012

The $Y_2O_3$ ceramics have been widely used as plasma resistant materials in the semiconductor industry. In this study, composites made of plasma resistant $Y_2O_3$ and electrically conductive carbon have been produced. The electrical properties of this composite were measured with respect to the size, volume fraction of the conductive carbon phase, and sintering temperature. When micro-sized carbon was used, the composites were insulating up to 5 wt% addition of the carbon. However, when nano-sized carbon of around 60 ~100 nm was used, the composites became conductive over threshold volume fraction of carbon, which increased with increasing sintering temperature. This behavior of electrical conductivity of the composites was discussed in terms of the percolation theory. The percolation threshold of the conductivity seemed to be affected by the grain growth and coalescences of dispersed conductive carbon phases with grain growth of matrix $Y_2O_3$.

• 운동영양학회지
• /
• 제23권3호
• /
• pp.22-28
• /
• 2019

[Purpose] The purpose of this study was to investigate the effect of diet plus exercise training and detraining for 12 weeks on body composition, aerobic performance, and stress-related variables in obese women. [Methods] Twenty-five women in their 20s-40s with 30% body fat and body mass indices above 25 kg/m² were divided into HR_LT (heart rate at lactate threshold) and HR_LT + 5% groups. Dietary intervention of 70% recommended dietary allowance (RDA) and exercise treatment composed of aerobic exercises on a bicycle (30 min) and treadmill (30 min) were then performed. These interventions were performed three times a week for 12 weeks. [Results] Dietary intake was significantly decreased, while daily activity significantly increased within the 12-week intervention period, and this effect was sustained after 12 weeks of detraining. Exercise training based on dietary intake and daily activity presented a significantly decreased weight and % body fat, improvement of aerobic performance, and a significant increase in heart rate variability (HRV) (e.g., average of all RR intervals and the square root mean squared differences of successive RR intervals) as stress-related variables. It was also confirmed that the improvement of body composition and stress-related variables were maintained even after detraining. [Conclusion] Our results suggest that 70% RDA of dietary intervention and exercise training corresponding to HR_LT and HR_LT + 5% for 12 weeks were effective in improving body composition and aerobic performance, and relieving stress. In particular, enhanced HRV persisted for up to 12 weeks after the end of exercise training in obese women.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1070-1077
• /
• 2010

The creep rates of polycrystalline $L1_2$-ordered $Co_3Ti$ and B2-ordered NiAl-Hf intermetallics decrease appreciably with the fine precipitation of the coherent disordered fcc Co-rich phase and $Ni_2AlHf$ phase. With B2-ordered NiAl containing $L2_1-Ni_2AlHf$ precipitates, transmission electron microscope observations of the interaction between dislocations and spherical precipitates revealed that the dislocations tend to be strongly attracted to the particle interfaces during the creep deformation. On the other hand, with $L1_2$-ordered $Co_3Ti$, the significance of the threshold stress is discussed based upon the transmission electron microscope observations of the interaction between dislocations and precipitates. The superdislocations produced during deformation tend to be strongly attracted and dissociated as they meet the coherent disordered precipitates because the anti-phase boundary energy in the disordered phase was zero. An extra force required to pull the dislocations out of the disordered particles during the creep deformation establishes the threshold stress which is beneficial for improving creep strength under lower stresses.