• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.57-62
• /
• 2013

We investigated the thermal and electrical properties of the $B_2O_3-ZnO-Bi_2O_3$ glass system as a sealing material in sheath heater modules. A composition with over 90 wt% $Bi_2O_3$ in the $B_2O_3-ZnO-Bi_2O_3$ system was glassified by controlling the cooling rate. The glass transition temperature and thermal expansion coefficient in bismate glass could be controlled by the minor ingredients of ZnO, $SiO_2$, $BaO_2$, and $K_2O$. The $B_2O_3-ZnO-Bi_2O_3$ glass system bonded well to metal, and bismate glass insulating properties were comparable to those of bismate glass $B_2O_3-ZnO-PbO$ glass system in a sheath heater module.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1281-1292
• /
• 2014

Photovoltaic (PV) solar systems with series-connected module integrated converters (MICs) are receiving increased attention because of their ability to create high output voltage while performing local maximum power point tracking (MPPT) control for individual solar panels, which is a solution for partial shading effects in PV systems at panel level. To eliminate the partial shading effects in PV system more effectively, sub-MICs are utilized at the cell level or grouped cell level within a PV solar panel. This study presents the results of a series-output-connection MPPT (SOC-MPPT) controller for sub-MIC architecture using a single sensor at the output and a single digital MPPT controller (sub-MIC SOC-MPPT controller and architecture). The sub-MIC SOC-MPPT controller and architecture are investigated based on boost type sub-MICs. Experimental results under steady-state and transient conditions are presented to verify the performance of the controller and the effectiveness of the architecture.

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.1-7
• /
• 2020

뉴로모픽 소자 초기 단계인 저항 변화형 메모리 소자의 제작 공정으로, 진공 공정의 연속성을 유지하였고, 고집적, 고신뢰성을 보장하는 뉴로모픽 컴퓨팅을 위한 저항 변화 메모리 소자 제작 및 공정 기술에 적합한 플라즈마 모듈을 적용하였다. 플라즈마 모듈을 적용한 저항메모리(ReRAM) 소자의 제작과 연구는 ReRAM 소자 기반의 TiO₂/TiOx 산화물박막의 제작방법과 소재의 변화를 통한 다양한 실험을 통하여 완성되었다. XRD를 이용하여 rutile결정을 측정하였고, 반도체 파라미터 측정기로 저항 메모리의 HRS : LRS 비율이 2.99 × 10³ 이상이고, 구동 전압 측정이 0.3 V이하에서 구동이 가능한 저항 변화형 메모리 소자의 제작을 확인 하였다. 산소 플라즈마 모듈을 적용한 뉴로모픽 저항메모리 제작과 TiOx 박막을 증착하여 성능을 확인하였다.

• 한국통신학회논문지
• /
• 제40권8호
• /
• pp.1606-1612
• /
• 2015

본 논문에서는 스마트폰에 장착 가능하고 휴대가 가능한 고효율 NDIR $CO_2$ 센서 모듈을 개발하였다. 저전력 회로 설계를 위하여 텅스텐램프 대신에 적외선 LED를 사용하였으며, 센서 모듈에 최적화된 광도파로를 설계 및 제작하였다. 스마트폰과 인터페이스가 가능한 회로를 통하여 스마트폰의 전원으로 센서 모듈이 구동되도록 설계하였다. $CO_2$ 농도, 온도 및 습도 등 측정된 센서의 데이터는 스마트폰 앱을 통하여 화면에 표시하였다. 측정 결과, 개발된 센서 모듈은 온도$-10^{\circ}C{\sim}50^{\circ}C$ 구간에서 0 ~ 3,000ppm 범위의 $CO_2$ 농도를 측정할 수 있었으며 측정 오차는 ${\pm}60ppm$이내였다.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.628-634
• /
• 2005

We have simulated and proposed novel optical cavity, which has two elliptical mirrors, for NDIR gas sensor module and have tested it from 0 ppm to 2,000 ppm $CO_2$ concentration. The proposed sensor module shows the maximum peak voltage at 500 ms pulse modulation time, however, it shows a maximum voltage changes at 200 ms pulse duration with 18,000 times amplification gain. From 0 ppm to 2,000 ppm, the voltage difference of sensor module $({\Delta}V)$ shows 360 mV at 200 ms pulse duration and 3 sec turn-off time. The response time of designed sensor module is about 30 seconds.

• 항공우주기술
• /
• 제6권2호
• /
• pp.8-13
• /
• 2007

반디호 전기계통 설계 시 성능외에 추가로 고려한 사항은 정비성 향상이다. 기존의 소형항공기들의 경우 전기계통의 정비성은 엔진이나 다른 계통에 비해 현저히 떨어진다. 그 결과 전기계통 문제 해결을 위한 정비 시간과 인력이 많이 소모되고 있다. 반디호의 경우 설계 단계에서부터 모듈화 개념을 도입하여 전기계통의 세부 모듈들의 분리를 가능하게 하여 각 모듈별로 정비가 가능하게 함으로써 정비가 편리하도록 하였다. 본 논문에서는 반디호 전기계통의 설계 및 제작에 대하여 기술하였다.

• 호남수학학술지
• /
• 제42권3호
• /
• pp.591-600
• /
• 2020

A module M is called ss-semilocal if every submodule U of M has a weak supplement V in M such that U∩V is semisimple. In this paper, we provide the basic properties of ss-semilocal modules. In particular, it is proved that, for a ring R, _RR is ss-semilocal if and only if every left R-module is ss-semilocal if and only if R is semilocal and Rad(R) ⊆ Soc(RR). We define projective ss-covers and prove the rings with the property that every (simple) module has a projective ss-cover are ss-semilocal.

• Kyungpook Mathematical Journal
• /
• 제63권3호
• /
• pp.333-344
• /
• 2023

In this paper, we generalize the notions uniformly S-flat, briefly u-S-flat, modules and dimensions. We introduce and study the notions of weak u-S-flat modules. An R-module M is said to be weak u-S-flat if Tor^R₁ (R/I, M) is u-S-torsion for any ideal I of R. This new class of modules will be used to characterize u-S-von Neumann regular rings. Hence, we introduce the weak u-S-flat dimensions of modules and rings. The relations between the introduced dimensions and other (classical) homological dimensions are discussed.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.95-103
• /
• 1996

This paper describes a computer aided design system for spur and helical gears. To establish the appropriate program, an integrate approach based on a rule-base system was adopted. This system is implemented on the personal computer and its environment is a commercial CAD package called AutoCAD. This system includes a main program and five sub-modules such as data input module, tooth profile drawing module, strength calculation module, and drawing edit module. In the main program, all the sub-modules are loaded and the type of gear and tooth profile are selected. In the data input module, the variables which are necessary to the design of gear are selected from the database. In the drawing module, from the calculated results, the required gear tooth is produced on the screen. The developed system that aids gear designer provides powerful capabilities for gear design.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.878-885
• /
• 2012

In this study we aims to examine the co-doping effects of 1/3 mol% $Mn_3O_4+Co_3O_4$ (1:1) on the reaction, microstructure, and electrical properties such as the bulk defects and grain boundary properties of $ZnO-Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi=0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Mn,Co-doped ZBS, ZBS(MCo) varistors were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed and promoted densification at lower temperature on heating in Sb/Bi=1.0 by Mn rather than Co. Pyrochlore on cooling was reproduced in all systems however, spinel (${\alpha}$- or ${\beta}$-polymorph) did not formed in Sb/Bi=0.5. More homogeneous microstructure was obtained in $Sb/Bi{\geq}1.0$ In ZBS(MCo), the varistor characteristics were improved drastically (non-linear coefficient, ${\alpha}$=30~49), and seemed to form $Zn_i^{..}$(0.17 eV) and $V_o^{\bullet}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy (IS & MS), the grain boundaries have divided into two types, i.e. the one is tentatively assign to $ZnO/Bi_2O_3(Mn,Co)/ZnO$ (0.47 eV) and the other ZnO/ZnO (0.80~0.89 eV) homojunctions.