• Elastomers and Composites
• /
• v.59 no.1
• /
• pp.8-16
• /
• 2024

As regulations on greenhouse gas emission have strengthened globally, the demand for improved fuel efficiency in automobiles continues to rise. In response, the tire industry is actively conducting research to improve fuel efficiency by enhancing tire performance. In this study, silica-filled epoxidized natural rubber (ENR)/butadiene rubber (BR) blend compounds were manufactured according to ENR types and silica contents, and their physical properties and vulcanizate structure were evaluated. ENR-50, which has a higher epoxide content than ENR-25, exhibited stronger filler-rubber interaction, resulting in superior abrasion resistance. In addition, because of its high glass transition temperature (T_g), the wet grip performance of ENR-50 improved, even though the rolling resistance increased. Increasing the amount of silica had little effect on the abrasion resistance due to the increase in filler-rubber interaction and decrease in toughness. In addition, ENR-50 exhibited better wet grip performance; however, the rolling resistance increased. The results indicated that truck bus radial (TBR) tire tread compounds can be designed by applying ENR-50 to improve wear resistance and wet grip performance. In addition, by applying ENR-25 and reducing the silica contents improve fuel efficiency.

• Elastomers and Composites
• /
• v.59 no.1
• /
• pp.34-41
• /
• 2024

In this study, the effects of the type and content of silica on the mechanical and tear properties of chloroprene rubber (CR), which is mainly used as a jacket material for mining cables, were studied. The crosslinking density (ΔM) and reinforcing factor (α_f) defined using cure characteristics increased with increasing silica content, whereas the cure rate decreased. The hardness, tensile strength, and modulus of the CR compounds increased depending on the silica content and structural development. The reinforcing behavior of the silica-filled CR compounds according to the silica type and content showed the best fit with the Thomas equation of the predictive model. Tear strength was evaluated using two standard test methods, ASTM D470 and DIN VDE 0472-613, and the results were compared. The tear strength increased as the silica content increased, regardless of the test method, and the different tear strengths obtained by the two standard test methods showed a linear relationship with each other, indicating a high correlation.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.342-352
• /
• 2023

Ultra-violet (UV) light is one of abiotic stress factors and causes oxidative stress in plants, but a suitable level of UV radiation can be used to enhance the phytochemical content of plants. The accumulation of antioxidant phenolic compounds in UV-exposed plants may vary depending on the conditions of plant (species, cultivar, age, etc.) and UV (wavelength, energy, irradiation period, etc.). To date, however, little research has been conducted on how leaf thickness affects the pattern of phytochemical accumulation. In this study, we conducted an experiment to find out how the antioxidant phenolic content of kale (Brassica oleracea var. acephala) leaves with different thicknesses react to UV-A light. Kale seedlings were grown in a controlled growth chamber for four weeks under the following conditions: 20℃ temperature, 60% relative humidity, 12-hour photoperiod, light source (fluorescent lamp), and photosynthetic photon flux density of 121±10 µmol m^-2 s^-1. The kale plants were then transferred to two chambers with different CO₂ concentrations (382±3.2 and 1,027±11.7 µmol mol^-1), and grown for 10 days. After then, each group of kale plants were subjected to UV-A LED (275+285 nm at peak wavelength) light of 25.4 W m^-2 for 5 days. As a result, when kale plants with thickened leaves from treatment with high CO₂ were exposed to UV-A, they had lower UV sensitivity than thinner leaves. The Fv/Fm (maximum quantum yield on photosystem II) in the leaves of kale exposed to UV-A in a low-concentration CO₂ environment decreased abruptly and significantly immediately after UV treatment, but not in kale leaves exposed to UV-A in a high-concentration CO₂ environment. The accumulation pattern of total phenolic content, antioxidant capacity and individual phenolic compounds varied according to leaf thickness. In conclusion, this experiment suggests that the UV intensity should vary based on the leaf thickness (age etc.) during UV treatment for phytochemical enhancement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.933-938
• /
• 2002

(Ba,Sr)TiO$_{4}$ (BST) thin films on Pt/Ti/SiO$_{2}$/Si substrates were deposited by a sol-gel method and the etch characteristics of BST thin films have been investigated as a function of gas mixing ratio. The maximum etch rate of the BST films was 440 $AA$/min under such conditions as: CF$_{4}$(CF$_{4}$＋Ar) of 0.2, RF-power of 700 W, DC-bias voltage of -200 V, pressure of 15 mTorr and substrate temperature of 30 $^{circ}C$. The selectivities of BST to Pt, SiO$_{2}$ and PR were 0.38, 0.25 and 0.09, respectively. In the XPS (X-ray photoelectron spectroscopy) analysis, Barium (Ba) and Strontium (Sr) component in BST thin films formed low volatile compounds such as BaFx, SrFx, which are forms by the chemical reaction with F atoms and is removed by Ar ion bombardment. Titanium (Ti) is removed by chemical reaction such as TiF with ease. The result of secondary ion mass spectrometry (SIMS) analysis confirmed the existence of the BaFx, SrFK, TiFx.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.67-72
• /
• 2014

Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties, including high strength, high hardness, excellent ductility and toughness. In this study, nanopowders of $Al_2O_3$, MgO and $TiO_2$ were prepared as starting materials by high energy ball milling for the simultaneous synthesis and sintering of the nanostructured compound $Mg_4Al_2Ti_9O_{25}$ by high-frequency induction heating process. The highly dense nanostructured $Mg_4Al_2Ti_9O_{25}$ compound was produced within one minute by the simultaneous application of 80MPa pressure and induced current. The sintering behavior, grain size and mechanical properties of the $Mg_4Al_2Ti_9O_{25}$ compound were evaluated.

• Natural Product Sciences
• /
• v.13 no.3
• /
• pp.268-271
• /
• 2007

Glutamate-induced oxidative injury contributes to neuronal degeneration in many central nervous system (CNS) diseases, such as epilepsy and ischemia. Bioassay-guided fractionation of the MeOH extract of the seeds of Alpinia katsumadai Hayata (Zingiberaceae) furnished three phenolic compounds, alpinetin (1), pinocembrin (2), and (+)-catechin (3). Compounds 2 and 3 showed the potent neuroprotective effects on glutamate-induced neurotoxicity and reactive oxygen species (ROS) generation in the mouse hippocampal HT22 cells. In addition, Compounds 2 and 3 showed significant DPPH free radical scavenging effect. These results suggest that compounds 2 and 3 could be the effective candidates for the treatment of ROS-related neurological diseases.

• The Korean Journal of Ecology
• /
• v.20 no.3
• /
• pp.181-189
• /
• 1997

Phenolic compounds from 7 species of naturalized invader species and Korean wild plants were analyzed by high performance liquid chromatography. Eleven phenolic compounds including benzoic acid were identified. The extract of naturalized plants was significantly more inhibitory to seed germination and seedling growth of the both naturalized and Korean wild plants. The content of total phenolic compounds in each extract were 43.5 mg/l in Ailanthus altissima as the maximum amount and 25.5 mg/l in Phytolacca americana as the minimum. Phytotoxic substances of ethanol extracts was investigated for antifungal activity against 23 selected fungus species. The antifungal activity of Phytolacca americana showed the greatest clear zone of 23 mm in Aspergillus awamori and its activity had an effect against 6 fungus species. Ailanthus altissima formed the greatest clear zone of 26 mm in Erwinia carotovora sub. sp. carotovora and had an effect agsinst 2 fungus species.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.234-241
• /
• 2009

In this study, CNT/$TiO_2$ composites derived from various titanium alkoxides and multiwalled carbon nanotubes (MWCNTs) were synthesized and characterized. Surface areas and pore volumes of the CNT/$TiO_2$ samples showed catastrophic decrease due to deposition of titanium compounds. Scanning electron microscopy (SEM) results indicated that the MWCNTs were homogenously decorated and well-dispersed onto/into the composites without apparent agglomeration of $TiO_2$ particles. In the X-ray diffraction (XRD) patterns, peaks of anatase and rutile phase were observed. The energy dispersive X-ray spectroscopy (EDX) spectra revealed the presence of major elements such as C and O with strong Ti peaks. According to the photocatalytic results, MB removal by a treatment with CNT/$TiO_2$ composites seems to have an excellent removal effect as order of CTIP, CTNB and CTPP composites due to a photolysis of the supported $TiO_2$, the radical reaction and the adsorptivity and absorptivity of the MWCNTs.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1703-1708
• /
• 2011

ZSM-5-$SO_3H$ efficiently catalyzed the one-pot three-component Mannich reaction of aldehydes, anilines, and ketones. ${\beta}$-Aminocarbonyl compounds were obtained in reasonable yields and excellent stereoselectivities when the reaction was carried out at room temperature under solvent-free conditions. Simple experimental conditions and product isolation procedure makes this protocol potential for the development of clean and environment-friendly strategy for the synthesis of ${\beta}$-amino-ketones. The catalyst was recovered and reused for subsequent runs.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.206.1-206.1
• /
• 2003

From methanol extract of Acanthopnanax senticosus, six platelet anti-aggregating compounds, chiisanogenin (1), chiisanoside (2), ursolic acid (3), oleanolic acid (4), b-sitosterol (5) and daucosterol (6) were isolated. All of the isolated compounds showed dose-dependent inhibitory activities to rat platelet aggregation induced by all the agonist employed. Compound 1 showed about 50 folds higher potency than acetylsalicylic acid (ASA) on U46619 induced platelet aggregation (IC$\sub$50/ : 6.21 ${\mu}$M) and 10 ∼ 20 folds higher effect than ASA on epinephrine and arachidonic acid (AA) induced aggregation (IC$\sub$50/ ; 2.50 and 4.81 ${\mu}$M, respectively). (omitted)