• KSBB Journal
• /
• 제19권6호
• /
• pp.421-426
• /
• 2004

토종콩으로부터 비배당체 이소플라본을 추출하기 위한 다양한 기계적 및 화학적 방법을 적용하였다. 용매추출법의 침적과 교반, 초음파에너지와 아임계/초임계 수 추출이 포함되었다. 용매의 조성에 의한 추출효율의 증가, 교반에 의한 특정성분의 추출효과의 증대, 초음파에너지에 의한 추출성능의 개선, 용매보다 용해력이 좋은 초임계유체의 적용에 관한 실험을 수행한 결과에 의하면 비배당체 이소플라본의 추출은 초음파에너지에 의한 것이 가장 우수하였다.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.21-27
• /
• 2019

Lifetime of Si photovoltaics modules are about 25 years and a large amount of waste modules are expected to be discharged in the near future. Therefore, the extraction and collection of valuable metals out of discharged Si modules will be one of the important technologies. In this study, we demonstrated that supercritical $CO_2$ extraction method can be effectively used to remove Cu, one of the abundant elements in the module, as well as its oxide form, $Cu_2O$. Especially, we proved that the addition of hexane as co-solvent is effective for the removal of both materials. The optimal ratio of $CO_2$ and hexane was 4:1 at a fixed temperature and pressure of $250^{\circ}C$ and 250 bar, respectively. In addition, it was proven that the removal of $Cu_2O$ was preceded via reduction of $Cu_2O$ to Cu.

• Nuclear Engineering and Technology
• /
• 제40권2호
• /
• pp.155-162
• /
• 2008

Heat transfer experiments in an annulus passage were performed using SPHINX(Supercritical Pressure Heat Transfer Investigation for NeXt Generation), which was constructed at KAERI(Korea Atomic Energy Research Institute), to investigate the heat transfer behaviors of supercritical $CO_{2}$. $CO_{2}$ was selected as the working fluid to utilize its low critical pressure and temperature when compared with water. The mass flux was in the range of 400 to 1200 $kg/m^{2}s$ and the heat flux was chosen at rates up to 150 $kW/m^{2}$. The selected pressures were 7.75 and 8.12 MPa. At lower mass fluxes, heat transfer deterioration occurs if the heat flux increases beyond a certain value. Comparison with the tube test results showed that the degree of heat transfer deterioration in the heat flux was smaller than that in the tube. In addition, the Nusselt number correlation for a normal heat transfer mode is presented.

• 한방안이비인후피부과학회지
• /
• 제33권4호
• /
• pp.32-43
• /
• 2020

Objectives : The aim of this study was to investigate the anti-oxidant and anti-aging effect of the seed of Camellia japonica L. extracted by supercritical CO₂. Methods : The cell viability was performed by MTT assay. Nitric oxide (NO) production was performed by NO assay. The anti-oxidant effect was performed by beta-carotene bleaching assay and the intracellular proteome was analyzed expression of each 15 proteins by 2-D electrophoresis. Results : Fatty acid analysis of extract from Camellia japonica L. has shown oleic acid was 84%. And the antioxidant effect was about 186% compared with alpha-tocoperol(0.1%) by beta carotene bleaching assay. In 2D PAGE analysis, fifteen protein changes in five mechanisms which was collagen synthesis pathway, MMPs, ECM-cell interaction, cytokine, antioxidant enzymes were analyzed. Conclusions : On this study extract from seed of Camellia japonica L. by supercritical extraction could be used as a antioxidant and antiaging substance for the skin.

• 융합정보논문지
• /
• 제11권12호
• /
• pp.236-243
• /
• 2021

본 연구는 자색당근(black carrot, BC) 소재로 초임계추출물에 대해 DPPH radical 소거능, ABTS radical 소거능, 총 폴리페놀 함량 측정을 통해 항산화 활성, 인간의 정상 섬유아세포에서 콜라겐 생성과 MMP-1 발현을 조사하여 항주름 효능을 평가하고자 하였다. 그 결과 자색당근 초임계추출물 내 총 폴리페놀 함량 (9.037±1.123 mg GAE/g), DPPH, ABTS 분석 결과로 높은 항산화 효과를 확인하였다. NHDF 세포에서 초임계추출물 농도에 의한 세포독성은 거의 없었으며, 이때 추출물은 농도 의존적으로 MMP-1 단백질 및 MMP-1 mRNA 발현을 억제하고, 콜라겐 type I 유전자 mRNA 수준 증가에 의한 type I procollagen의 합성을 촉진하였다. 이상의 결과를 종합해 볼 때, 자색당근 초임계추출물은 우수한 항산화 효능과 친환경(solvent free)물질, 항노화 원료로서 화장품, 식품, 미용식품 등 다양한 산업분야에 있어 활용 가능성이 매우 높을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.41-50
• /
• 2000

Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.254-263
• /
• 2015

In this study, numerical simulations are carried out to investigate the dynamic SGS model effects in a Kerosene-LOx coaxial swirl injector under high pressure conditions. The turbulent model is based on large-eddy simulation (LES) with real-fluid transport and thermodynamics. To assess the effect of the dynamic subgrid-scale (SGS) model, the dynamic SGS model is compared with that of the algebraic SGS model. In a swirl injector under supercritical pressure, the characteristics of temporal pressure fluctuation and power spectral density (PSD) present comparable discrepancies dependant on the SGS models, which affect the mixing characteristics. Mixing efficiency and the probability density (PDF) function are conducted for a statistical description of the turbulent flow fields according to the SGS models. The back-scattering of turbulent kinetic energy is estimated in terms of the film thickness of the swirl injector.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.31-39
• /
• 2021

In this study, the dyeing properties of supercritical fluid dyed nylon fabrics were investigated which use two types of dyes for dyeing nylon. For other dyeing conditions were referred to related literature, and dyeing was performed with different dyeing concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, the color intensity increased as the concentration increased, but the increase was insignificant at high concentration. This tendency was more obvious in C.I. Disperse Orange 155 than in C.I. Disperse Yellow 42. The dye absorption rate also decreases as the concentration increases, but at 0.85% o.w.f concentration, C.I. Disperse Yellow 42 was 97.29% and C.I. Disperse Orange 155 was 93.77%. For both dyes, the wash fastness dropped by 0.5 to 1 class from the sample that was dyed at a concentration of 0.5% o.w.f in the wash fastness test.

• 한국항공우주학회지
• /
• 제50권5호
• /
• pp.333-338
• /
• 2022

쉐도우그래프(Shadowgraph) 기법을 통해 케로신의 대체 물질인 데칸/메틸사이클로헥산 혼합연료를 사용하는 단일 제트(jet)를 초임계 환경으로 분사하여 제트의 거동을 가시화하였다. T_r = 0.484인 연료 제트의 분사 차압 ∆P는 0.5 MPa로 일정하게 유지하였고 혼합연료의 임계점 이상에서 실험을 진행하였으며 챔버 내부 환산온도 T_r(=T/T_c)를 1.00~1.23, 환산압력 P_r(=P/P_c)을 1.00, 1.38로 변화하여 실험결과를 분석하였다. 초임계 환경으로 분사되는 제트의 밀도감소 지표로써 후처리 된 제트 이미지의 밝기 강도를 챔버 내부 온도와 압력을 변화시켜 관찰하였다. 챔버 내부 온도가 상승할 때 제트의 밝기 강도 감소 폭이 커지는 것을 확인하였으며, 동일 온도일 때 챔버 내부 압력이 높을 경우 제트의 밝기 강도 감소가 지연되는 것을 확인하였다. 챔버 내부 압력이 높을 경우 연료의 유사 임계온도(pseudocritical temperature)가 증가하고 연료 제트의 밀도감소에 필요한 온도가 상승하여 밝기 강도 변화가 지연되는 근거로 판단하였다.