• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.423-431
• /
• 2022

The purpose of this study is to present objective information in applying 3D printing technology for PET/CT (Positron Emission Tomography/Computed Tomography) performance evaluation and use it as a basic research that can be applied to various purposes in the future. Phantoms were manufactured with step wedge of ABS(Acrylonitrile Butadiene Styrene) and ACR(Acrylic acid) material. The counts for each ROI(Region of Interest) were analyzed through image acquisition in PET/CT. And the variation rate of counts and CNR(Contrast Noise Ratio) was evaluated. In the counts analysis, the effect of thickness occurred. In addition, in the variation rate analysis, the thickness setting of steps wedge 4 to 5 levels should be considered first. These results minimize quantitative and qualitative changes in the phantom manufactured based on 3D printing, and enable more stable PET/CT performance evaluation. Based on 3D printing in PET/CT, various phantoms are expected to be produced in the future. If the characteristics of each material are considered and applied through the basic research such as this research, the result of the phantom manufactured through 3D printing can be more meaningful and will be used in a wide range.

• 공업화학
• /
• 제4권2호
• /
• pp.284-290
• /
• 1993

AN을 친수성 공단량체로 하고, KPS를 개시제로 하여 St/BD의 무유화제 유화중합을 해 본 결과, 전환율 50% 이하에서 Rp의 $[AN]^n$ 및 $[KPS]^n$에 대한 의존성은 각각 n=1.617-1.050 및 n=0.83-0.96을 보였으며, 입자수 밀도 (Np)의 $[AN]^n$ 및 $[KPS]^n$ 의존성은 n=1.533 및 n=0.733이었다. 그리고 pH=5, 총단량체 (g)/물(g)=0.5일 때 전환율이 가장 높았으며, 얻어진 SBR은 상용 SBR에 비해 가류속도가 훨씬 빠르고, tensile strength, 300% modulus, elongation 등 기본 물성에서 열세였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.132-136
• /
• 2002

$Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)\;(OTf=CF_3SO_3^-)$ readily reacts with various amines to afford cationic amine complexes $[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(amine)](OTf)\;(amine=NH_3,\;NHMe_2,\;NHC_4H_8,\;NH_2Ph,\;NH_2(Tol-p))$ in high yields. These complexes have been fully characterized by IR, $^1H-,\;^{19}F{^1H}-,\;and\;^{31}P{^1H}-NMR$ spectroscopy, and elemental analyses. Reaction of $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ with acrylonitrile quantitatively produced the ${\pi}$-olefinic complex $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(CH_2=CHCN)](OTf)$ which is only stable in solution in the presence of acrylonitrile. Attempt at isolating this complex in the pure solid state was failed due to partial decomposition into $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ The equilibrium constants $(K_{eq}=[Pt(PCP)-(NH_2R)^+][CH_2=CHCN]/[Pt(PCP)(CH_2=CHCN)^+][NH_2R]:\;[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(CH_2=CHCN)]^++NH_2R{\rightleftarrows}[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(NH_2R)]^++CH_2=CHCN=Ph,\;p-tolyl)$ were calculated to be 0.28 (for R = Ph) and 3.1 (R = p-tolyl) at $21^{\circ}C$. The relative stability of the ${\sigma}$-donor amine versus the ${\pi}$-olefinic acrylonitrile complex has been found largely dependent upon the amine-basicity $(pK_b)$, implicating that acrylonitrile practically competes with amine in the platinum coordination sphere. On the contrary to the formation of the acrylonitrile complex, no reaction of $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ with other olefins such as ethylene, styrene and methyl acrylate was observed.

• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.23-28
• /
• 2000

The influence of the polarity of the spreading solvent on the properties of the monolayer of poly(styrene-co-acrylonitrile)'s with various acrylonitrile contents was studied. The surface pressure - area isotherm and the apparent dipole moment - area isotherm were obtained and analyzed when the mixtures of methylene chloride and N-N-dimethylformamide used as spreading solvent. The isotherms were strongly influenced by the polarity of the solvent.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.585-590
• /
• 1997

Conventional foaming process has defects such as lower mechanical properties than ur~foaming material due to non-uniform cell distribution and environmental pollution problem caused by chemical blowing agency. So, a new foaming process such as Microcelluar plastics has been introduced to use inactive gases as a foaming agency. In order to apply Microcellular plastics for mass production process system such as extrusion, injection molding and blow molding, it needs to predict the change in material properties of polymer according to the amount of meltingas. In Polymer molding applying Microcelluar plastics, the change of viscosity among several material properties is the most important factor. Therefore, this paper is aimed to establish the method which not only finds out but also predicts the change of viscosity of ABS(Acrylonitri1e Butadiene Styrene) resin according to inert gas amount in extrusion molding.

• Elastomers and Composites
• /
• 제30권2호
• /
• pp.105-111
• /
• 1995

The thermal decomposition of the paper sludge with poly (acrylonitrile-butadiene-styrene) was using a thermal analysis techniques in the stream of nitrogen gas of 30ml/min at various heating rates from 4 to $20^{\circ}C/min$. The mathmatical, derivative and integral method were used to obtain values of activation energy of decomposition reaction. 1. The values of activation energy evaluated by derivative and Intergral method were consistent with each other very well. 2. The maximum value of heat of decomposition evaluated by DSC method was 10.120cal/g at weight ratio of paper sludge/ABS=20/80. 3. The thermogravimetric trace curve agreed with the theoretical equation.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.243-245
• /
• 2002

ABS(Acrylonitrile Butadiene Styrene) 수지는 낮은 비중과 전기전도도, 가공성 등 우수한 물리적 성질을 갖는다. ABS 수지 제조방법인 Conventional process와 이를 개선한 MmSH(Momentary mold Surface Heating) injection process로 제조하여 나타나는 도금의 최적 조건을 연구하였다. 탈지, 에칭, Neutralization, Catalyzing, Accelerating의 전처리 과정을 거쳐 pH 변화에 따른 무전해 Ni 도금을 실시한 결과 각 수지 모두 pH7 이상에서 도금속도와 밀착력이 증가하였으나 MmSH injection process로 제작된 ABS 수지보다 Coventional process에서 제작된 ABS 수지의 밀착력이 우수한 경향이 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.788-791
• /
• 1996

A mathematical model is developed for thermal solution copolymerization of styrene and acrylonitrile in a continuous stirred tank reactor(CSTR). Computational studies are carried out with the continuous copolymerization system model developed in this work to give the monomer conversion, copolymer composition and the average molecular weights of the copolymer. By performing the dynamic analysis of the reaction system, the polymer properties against the changes in the operating conditions are determined quantitatively. The cascade PID and fuzzy controller show satisfactory performances for both set point tracking and disturbance rejection. Especially, the fuzzy controller is superior to the PID controller.

• 공업화학
• /
• 제20권3호
• /
• pp.339-345
• /
• 2009

Acrylonitrile과 EPDM 고무 및 styrene을 원료로 AES 수지의 공중합을 개시제 함량, EPDM의 디엔 함량 및 점도가 다른 고무, 용매의 농도 및 종류를 달리하여 조사하였다. 개시제의 함량이 높을수록 전환율이 증가하였고, 분자량 및 평균 고무입자크기(RPS, Rubber Particle Size)는 감소하였다. 그라프트 비(GR, Graft Ratio)는 낮은 개시제 농도에서는 개시제 농도가 증가함에 따라 증가하여 최대값을 보이고 개시제 농도가 계속 증가하면 감소하는 경향을 보였다. 용매의 양이 감소할수록 전환율과 GR은 증가하였으나, 고무입자크기는 감소하였다. 단일 용매 중에는 톨루엔이 가장 좋은 반응 활성을 보였고, 에틸벤젠과 톨루엔을 섞으면 톨루엔만 사용하는 것보다 더 좋은 활성을 보였다. EPDM의 점도가 증가하면 고무입자크기가 커졌으며, 디엔 함량이 증가하면 GR과 SAN이 내포된 고무입자가 증가하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.133-138
• /
• 2013

Acrylonitrile-butadiene-styrene (ABS) plastic is a polymer material extensively used in electrical and electronic applications. Nickel (Ni) thin film was deposited on ABS by electroless plating, after its surface was treated and modified with atmospheric plasma generated by means of dielectric barrier discharges (DBDs) in air. The method in this study was developed as a pre-treatment for electroless plating using DBDs, and is a dry process featuring fewer processing steps and more environmentally friendliness than the chemical method. After ABS surfaces were modified, surface morphologies were observed using a scanning electron microscope (SEM) to check for any physical changes of the surfaces. Cross-sectional SEM images were taken to observe the binding characteristics between metallic films and ABS after metal plating. According to the SEM images, the depths of ABS by plasma are shallow compared to those modified by chemically treatment. The static contact angles were measured with deionized (DI) water droplets on the modified surfaces in order to observe for any changes in chemical activities and wettability. The surfaces modified by plasma showed smaller contact angles, and their modified states lasted longer than those modified by chemical etching. Adhesion strengths were measured using 3M tape (3M 810D standard) and by 90° peel-off tests. The peel-off test revealed the stronger adhesion of the Ni films on the plasma-modified surfaces than on the chemically modified surfaces. Thermal shock test was performed by changing the temperature drastically to see if any detachment of Ni film from ABS would occur due to the differences in thermal expansion coefficients between them. Only for the plasma-treated samples showed no separation of the Ni films from the ABS surfaces in tests. The adhesion strengths of metallic films on the ABS processed by the method developed in this study are better than those of the chemically processed films.