The purpose of this thesis is to study the method of the reasonable pattern design. The studying method is based on the original principle of the trousers' cutting and I have a hypothesis about the trousers pattern which should be proved. When I selected the practical method, I made use of the international measuring rule, graph paper and tracing paper, in order to prove the new pattern design. The reasonable pattern design should be the one of the suitable original principles to be suited in the design through any measurement. Therefore, I have discussed the above mentioned design. I find out the conclusion to prove the hypothesis of pattern design with the experimental measure after showing the above mentiond design. The characteristics is as follows. First : To be convinient when walking, because of little degree as folding of the front part of trousers with the under-angle. Second : To be suitable in proportion to the length of trousers and the under-angle. Third ; When folding the center line of the Sapok (a name of one of the trousers parts), the length of the Sapoks is same and harmonized with the Sapoks because of the same angle of both Sapoks in any case of the measurement. Fourth : No correction of the lines when dressing, for the same points of the large Sapok and the small one. Fifth : To be easiness of the pattern design through the concrete measurement. I could find out a little extent errors of pattern showings, an easiness of dressing, scientification of formation in Korean trousers and standard of the practical measurement in the program to be presented as the result of studying.
Journal of the Korean Society for Precision Engineering
/
v.20
no.2
/
pp.25-32
/
2003
Molding properties of etched surface pattern are presented. Injection molding has given attention on improving dimensional accuracy and productivity. However, the molding of etched surface pattern on plastic parts is not researched relatively for its additional values, which can meet design function and customer's attraction. Specimens, whose surface patterns are made by print-type etching, are investigated. The molding properties of surface pattern are estimated with roughness deviation of surface pattern on part and mold. The etching properties are related to physical properties of plastic materials and surface roughness of etched pattern. Also, flow mark and gate location can give influence on surface pattern molding. The experimental result can contribute to good molding of surface pattern in injection molding.
Mathematics is a science of pattern. Mathematics is a subject of inquiring which aims at discovering the models hidden behind the world. Pattern is abstraction and generalization of the model. Mathematical pattern is a higher level of mathematical model. Mathematics patterns are often hidden in pattern similarity. Creation of mathematics lies largely in discovering the pattern similarity among the various components of mathematics. Inquiring is the core and soul of mathematics teaching. It is very important for students to study mathematics like mathematicians' exploring and discovering mathematics based on pattern similarity. The author describes an example about how to guide students to carry out mathematics inquiring based on pattern similarity in classroom.
This study aims to understand the history of the Victorian age that attached importance to various designs and aesthetic aspects by art and craft movement, and to present that the Victorian pattern is a factor with unlimited possibility in application and development of the modern textile product designs. Therefore, through documents research home and abroad, I considered the periodical background of the Victorian style, a change course of textile, and the theoretical backing of the Victorian pattern, and I studied and analyzed the cases of being applied in the modern textile product designs by classifying apparel, home interior, and fashion accessories. First of all, in apparel, the Victorian pattern transformed into geometrical form had much relative importance, and secondly, in the home interior, the Victorian pattern was expressed realistically or it was represented more boldly and complexly with new materials or techniques introduced. Thirdly, in fashion accessories, decorative nature was shown in intense design with the real description of the Victorian flower pattern and brilliant colors. With these results, it was found out that when the Victorian pattern was applied in the modern textile product designs, it was the factor that could be expected to make a high value added suitable with the modern sense, and it was the pattern with developmental potential with its unlimited use range. Therefore, based on this study, it is considered that the development of textile product designs utilizing the Victorian pattern and academic research, reorganizing the Victorian pattern in accordance with the modern design should be continued.
In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.
This study aims to analyze the patterns made with knitted jacquard and intarsia techniques to provide essential data to help plan different knitwear designs using the techniques and patterns. Based on approximately 3,000 jacquard and intarsia knitwear published in the four significant womenswear collections over the past decade, eight main pattern types were classified, and each characteristic was analyzed. Firstly, it is a logo and symbol type pattern that appears mainly as a means of emphasizing a brand. Secondly, it is a traditional pattern with settled patterns from the past to the present. Third, it is a geometric pattern that appears both typically and atypically in various forms. Fourth, an abstract pattern type does not show a precise form or motif. Fifth, it is a colorful and diverse flower and plant pattern. Sixth, it is a landscape pattern that expresses nature and living space. Seventhly, it is an animal pattern type that expresses the appearance of an animal or the shape of the. Finally, it is a caricature pattern type using characters and various cartoonish motifs. Based on the analysis results of this study, creative and diverse design development of Jacquard and Intarsia knitwear and development of the knitwear market will take place.
This study examined the time allocation pattern of husbands and wives. This study investigated i)the pattern of time allocation in the light of the extent of time spent in housework child care and leisure among husbands and wives living in urban area ii) the differences in extent of time spent in such activities between wives and husbands and iii) the determinants of time spent in such activities. A system of time allocation equations based on household production theory and several hypotheses explaining the distribution of domestic work among couples were employed. According to the results the pattern of time allocation was different between wives and husbands. Regardless of women's employment status wives were more likely to have dual responsibilities than were husbands. The time equation employed in this study had more explanatory power in the pattern of time allocation of wives than of husbands and of employed wives than of non-employed wives. The sex-role ideology hypothesis was supported for non-employed wives but not for employed wives. The time availability hypothesis was supported for the time allocation of employed wives and husbands. The economic efficiency hypothesis was supported for employed wives' time allocation.
The purpose of this study is to analyze the patterns of commercial Cheollik dresses by size analysis and wearing evaluation. Six kinds of commercial Cheollik dress patterns distributed on the market were selected and classified into two types group, A type group(A-1, A-2, A-3) consisting of flat type sleeve pattern and B type group(B-1, B-2, B-3) consisting of three-dimensional type sleeve pattern depending on the sleeve type. The size of the Cheollik dress pattern was analyzed, and wearing evaluations of the appearance, movability were carried out. Cheollik dress pattern was made in various size and many patterns were produced in the form of omission of components such as seop. It should be based on the understanding of the form and composition of the traditional Cheollik for pattern development. As a result of the wearing evaluation, A-2 showed the highest evaluation in the appearance and movability evaluations in type A. B-2 was the highest evaluation in appearance evaluation in type B. But in the evaluation of the movability, B-2 received the lowest evaluation because of little allowance. Therefore, the allowance in clothes should be considered enough for the movability. The result of this study can be provided as a basic data for the development of Cheollik dress pattern reflecting modern trend and the traditional beauty.
Journal of Physiology & Pathology in Korean Medicine
/
v.27
no.3
/
pp.289-298
/
2013
The purposes of this article are understanding the meaning of yin deficiency interpreted with a perspective of Traditional Korean Medicine and a modern perspective a study and assigning modern diseases to yin deficiency pattern types. Clinical papers were searched in China National Knowledge Infrastructure(CNKI) from 1995 to 2013. Results are as follows. First, yin deficiency written in the "Neijing" has been understood in many ways. It is translated such as deficiency of yin qi, inner qi, essence, cubit pulse, yin meridians qi, viscera yin and kidney. Second, yin deficiency pattern are related with disorders of the endocrine system, immunity, energy metabolism, blood circulation, cytokine, microelements, lipid metabolism and capability of getting rid of oxygen free radicals. Third, from pattern types, diverse diseases classified in types involving the heat from yin deficiency, which reflects pathologic conditions of deficiency heat which is distinct characteristics of yin deficiency pattern. Various diseases classified in types related with liver or kidney are reported, which reflects two viscera are more related with yin deficiency than other viscera. Fourth, levels of pattern types surveyed are more specific than Korean Standard Classification of Diseases(KCD) and specific enough to be applied clinically. This article surveyed the categories of modern diseases yin deficiency pattern types is assigned to but the detailed relation between them will be necessary to be studied in the future.
With the growing interest in pet dogs and pet dog's wear I used this study to compare and analyze the pattern used by each supplier and developed a new pattern for pet dogs' wear which is appropriate for pet dogs' body lines and movement. Test subjects were 91 pet dogs in Busan and after comparing 3 patterns from different suppliers, I developed the pattern reflecting pet dogs' body shapes and movement. Results are as follows; 1) As a result of analyzing measurements, it was found that pet dogs motion in walking on four feet, is different from that of people on two feet. For center measurements, their waist to bust length is longer than their waist to back length. The result of analysis shows that bust circumference impacts most other measurement results and it seems that better results are achieved if the bust line is taken into consideration when measuring bust back length, bust front length, neck base circumference, front leg arc, the length between lateral shoulder etc. 2) As a result of comparing suppliers' patterns, it was discovered that each supplier has different sizes for the same patterns and those sizes are not standardized across the board. Even if the same size of pattern was actually used in the production of pet dogs' wear by the individual companies, there were many variations in size for each item. 3) To develop a more standard pattern of pet dogs' wear, I collected and analyzed 3 patterns from each supplier and designed a new pattern, revising it three times. After test-wearing of the experimental pattern and the studied patterns, and comparing and analyzing the results, the studied pattern had similarly better estimation than the experimental one.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.