• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.986-1003
• /
• 2021

This study was conducted to develop a basic pants pattern reflecting the average body shape of Chinese women in their 20s by using a virtual fitting method. A formula for the research pattern was derived by applying the measured value based on the drafting method of existing patterns. The final pattern was presented through two actual fitting processes. The suitability of the final pattern was then verified through a functional evaluation and an appearance evaluation based on an actual fitting and a virtual fitting. As a result of the evaluations, the final pattern reflected the body shape of Chinese women in their 20s and was evaluated as a higher quality pattern compared to existing patterns. The final pattern was based on the omphalion waist circumference. Ease amounts were set to be the omphalion waist circumference + 1.0 cm, hip circumference + 2.0 cm, and the pants length was set to 94 cm.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• Journal of the Korean Society of Costume
• /
• v.61 no.8
• /
• pp.32-44
• /
• 2011

This study will explore the application of the Korean alphabet 'Hangul' and its calligraphy on fashion design. Hangul is well known for its great formative characteristics. Its calligraphy has unique features that express the implicative meaning of the Korean language while simultaneously displays beautiful shapes that draw the viewer's eye. When Hangul calligraphy is applied on the pattern design, it can be an excellent opportunity to demonstrate the visual beauty of Hangul. The purpose of this study is to develop the pattern designs that utilize the Hangul calligraphy and apply them in various fields of fashion. The detailed concepts of this study are as follows. First, the theoretical concepts and characteristics of both Hangul calligraphy and pattern design will be understood. Second, the aesthetic characteristics of calligraphy will be drawn by case analysis on the artworks of famous calligraphers such as Kim Jong-geon, Kang Byeong-in, Lee Sang-hyeon, Lee Gyu-bok and other representative calligraphers who design the beauty of Korean calligraphy by handwriting and brush-writing. The obtained results will be used to explore the desirable direction of fashion design. Third, eight pattern motif fashion works that utilize Hangul calligraphy in accordance with the arrangement of different characteristics of fashion design will be presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.751-763
• /
• 2014

The paper is written to determine the optimal search pattern through search effects assessment on underwater targets. 5 types of search patterns are introduced such as, M-type pattern, W-type pattern, rectangular pattern, 4-type pattern and square pattern, In addition, Operational effectiveness analysis model is developed to obtain the optimum search pattern. The algorithms and mathematical models are also suggested to analyze the required search times, AUV's movement patterns, moving distances, overlapping areas and so on.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.410-421
• /
• 2018

The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.81-85
• /
• 2006

In this study, we have been examined nano Injection Molding process which can improve transcription of 100nm-level pattern. We changed the various parameter (temperature of injection mold, clamp force, temperature of nozzle) which can be influence for improving transcription. And we measured and analyzed shapes of 100nm-level pattern by Automic Force Microscope for proving transcription. We made the Blu-ray Disc sample for proving transcription. And we measured HF-Signal and jitter. As a result, when the temperature of mold is more than $120^{\circ}C$ and the clamp force is more than 10 ton, We reached over 95 percent of transcription compared with stamper pattern. And we reached in-spec. value for HF-Signal and Jitter. Then we reached over 95 percent of transcription compared with stamper pattern.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.9-17
• /
• 2006

The purpose of this study was to evaluate the titanium castability with a spin type casting machine(TiCast, Super R, Selec, Osaka. Japan). We tested phosphate bonded investment "Rematitan$^{(R)}$Plus(Dentaurum, Inc., Pforzheim, Germany)"of mesh grid pattern and plate pattern. Four different mold temperatures(room temperature, 200$^{\circ}C$, 400$^{\circ}C$ and 600$^{\circ}C$) were prepared for the present study. In mesh grid pattern with spruing of $\varphi$0.88㎜ dimeter, when the mold temperature increased, high percentage of castability was gained. Mold temperature showed a highly significant(p<0.05) correlation on the castability, In plate pattern, the higher the mold temperature during casting, the greater the adhesive phenomenon between Ti surface and the investment.

• The Research Journal of the Costume Culture
• /
• v.16 no.4
• /
• pp.609-618
• /
• 2008

The purpose of this study is to examine the inconvenience when putting on stretch pants and to compare and analyze the pattern making method of pants made of the stretch and non-stretch fabric to develop functional and good looking stretch pants. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study are as follows. First, the survey result for the woman consumers showed that pants were estimated as the most uncomfortable item among the stretch clothes and when they put the stretch pants on, the most uncomfortable parts of out-shell were the hip girth and rise. Secondly, the result of pattern making method of the pants was as follows. The ease of the stretch pants pattern was 0cm in the waist girth and -1 to -1.5cm in the hip girth more than non-stretch pants. The ease in crotch, inseam and outseam length was 0cm for both.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1322-1325
• /
• 1987

In this study, the excitation pattern, which can be sensated by a man having hearing loss due to the damage of inner ear, is extracted, and the procedure of the auditory speech signal processing is simulated with the computer. Therefore, the excitation pattern is extracted by the neural tuning model satisfying the physiological characteristic of the inner ear and by the infor.ation extracted from speech signal. The firing pattern is also extracted by inputting this excitation pattern to the auditory neural model. With this extracted firing pattern, the possibility that the patient can sensate the speech signal is studied by the computer simulation.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.47-51
• /
• 2018

As the IT industry rapidly progresses, the functions of electronic devices and display devices are integrated with high density, and the model is changed in a short period of time. To implement the integration technology, a uniform micro-pattern implementation technique to drive and control the product is required. The most important technology for the micro pattern generation is the exposure processing technology. Failure to implement the basic pattern in this process cannot satisfy the demands in the manufacturing field. In addition, the conventional exposure method of the mask method cannot cope with the small-scale production of various types of products, and it is not possible to implement a micro-pattern, so an alternative technology must be secured. In this study, the technology to implement the required micro-pattern in semiconductor processing is presented through the photolithography process and plasma etching.