• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.347-354
• /
• 1999

This experiment was carried out to determine the effect of maturity at harvest and inoculants on the quality of round baled rye(Secale cereale L.) silage at the experimental field of Grassland and Forage Crops Division, National Livestock Research Institute, RDA, Suwon in 1998. The experiment was consist of split-plot design with 3 replications. The main plots were 3 harvesting stages such as boot(20 April), heading(29 April), and flowering stages(14 May). The subplots wered inoculant treatments : control (untreated), inoculant A, and inoculant B. Acid detergent fiber(ADF), neutral detergent fiber(NDF), and in vitro dry matter digestibility (IVDMD) of rye silage were significantly increased with delayed harvesting date, but there was not significant difference between inoculants. Mean silage pH at flowering stage was the lowest(4.35), but the highest at early harvest(4.91). Inoculants significantly reduced acidity of silage compared with control. Dry matter(DM) content of the control was higher than that of inoculants. Ammonia-N as proportion of total N was below 10% which was maximum level of high quality silage. The addition of inoculants reduced ammonia-N. There were significant difference in organic acid contents between harvesting stages and inoculants. Lactic acid was increased with inoculants, but acetic and butyric acids were decreased. Various treatments increased colony forming unit(CFU) of lactic acid bacteria by 2 or 3 times compared with the control and the highest at flowering stage with inoculant B treatment. Results of this study indicate that use of microbial inoculant and harvesting after heading stage will improve the silage fermentation and quality of round baled rye silage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.339-346
• /
• 1999

This experiment was carried out to determine harvest date and cultivar effects on the agronomic characteristics, forage yield, and quality of fall sown oat (Avena sativa L.) at the forage experimental field, College of Agriculture and Life Sciences, Seoul National University, Suweon from August to November 1993. The experiment was arranged in a split plot design with three replications. The main plots were consisted of the harvesting dates, suchas early (11 October), mid(21 October), and late(1 November), the subplots were consisted of different maturities of oat cultivars, such as 'West', 'Cayuse' and 'Magnum'. The first heading date of an early maturing culivar, West, was observed on 10 October, and the heading increased up to 30% at the late harvesting date. The average dry matter (DM) content of oat cultivars increased significantly from 12.8 to 15.9% as the growing stage progressed(p<0.01). The average dry matter percentage of West, Cayuse, and Magnum was 15.4, 13.4, and 13.5%, respectively. The crude protein (CP) content of oat cultivars decreased significantly from 20.1 to 13.3% as the harvesting date was delayed(p<0.01), and the CP contents of midseason and late maturing cultivars, Cayuse and Magnum, respectively, were significantly higher than that of an early maturing cultivar West (p<0.01). The mid harvesting date showed the highest acid detergent fiber(ADF) and neutral detergent fiber (NDF) contents than the other harvesting dates, and an early maturing cultivar West had higher ADF and NDF contents than the midseason and late maturing cultivars, Cayuse and Magnum, respectively. The in vitro dry matter digestibility(IVDMD) of oat cultivar West decreased as the harvesting date was delayed, but that of Cayuse and Magnum decreased only by the mid harvesting date. Cayuse and Magnum showed 3~4% higher digestibility than West. The correlation coefficient between IVDMD and ADF content was -0.86. The average dry matter yield of oat cultivars increased from 2,901 to 5,901kg/ha as the harvesting date was delayed(p<0.01), but no significant difference was found among oat cultivars. The corrdelation coefficient between DM yield and gorwing degree days(GDD) was +0.86. The results of this study indicate that a delay in harvesting date would be recommendable for the increase of dry matter yield when fall-sown oat is grown. Especially, the DM yield of the midseason and late maturing cultivars, Cayuse and Magnum, respectively, can be increased without much change of forage quality although the harvesting date are delayed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2008

There has been a recent trend in Korea that treatments for combustible wastes among municipal solid waste (MSW) by those methods, such as incineration and landfill are restricted as much as possible and Mechanical Biological Treatment (MBT) are encouraged actively in order to promote resource recovery. To build and operate properly these facilities, the physicochemical characteristics of MSW should be analyzed precisely beforehand. In particular, designing a crusher or separator properly which is the main process in MBT facilities of MSW. require the information on the size distribution characteristics of MSW, but they are nor sufficient in the qualities and quantities yet as of now. Accordingly, this study aims to evaluate size distribution characteristics of MSW and its physicochemical characteristics by size. The samples of MSW were collected from detached dwelling area, apartment area, business area, and commercial area of A city in Korea. According to the result of analysis, paper records 29.78~60.02% by wet weight basis, so it was the most regardless of the regions where the wastes were generated. And in terms of element analysis, Carbon(C) was 34.77~44.39%, the largest friction, and Oxygen(O) was the next occupying 19.46~33.71%. As indices of RDFs, Chlorine(Cl) was 0.39~0.83%, so it was less than the standard, 2.0%(by dry weight basis); moreover, Sulfur(S) did not exceed the standard, 0.6%, either. In the size distribution of MSW, waste fraction ranging 50~80mm in diameter was the most in combustible waste while 30~50mm was in incombustible waste.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.249-255
• /
• 2009

The performance of microbial fuel cell (MFC) can be affected by many factors including the rate of organic matter oxidation, the electron transfer to electrode by electrochemical bacteria, proton diffusion, the concentration of electron acceptor, the rate of electron acceptor reduction and internal resistance. the performance of MFC using oxygen as electron acceptor can be influenced by oxygen concentration as limit factors in cathode compartment. Many studies have been performed to enhance electricity production from MFC. The series or parallel stacked MFC connected several MFC units can use to increase voltages and currents produced from MFCs. In this study, a single MFC (S-MFC) and a stacked MFC (ST-MFC) using acetate as electron donor and oxygen as electron acceptor were used to investigate the influence of dissolved oxygen (DO) concentrations in cathode compartment on MFC performance. The power density (W/$m^3$) of S-MFC was in order DO 5 > 3 > 7 > 9 mg/L, the maximum power density (W/$m^3$) of S-MFC was 42 W/$m^3$ at DO 5 mg/L. The power density (W/$m^3$) of ST-MFC was in order DO 5 > 7 > 9 > 3 mg/L and the maximum power density (W/$m^3$) of STMFC was 20 W/$m^3$ at DO 5 mg/L. These results suggest that the DO concentration of cathode chamber should be considered as important limit factor of MFC operation and design for stacked MFC as well as single MFC. The results of ST-MFC operation showed the voltage decrease of some MFC units by salt formation on the surface of anode, resulting in decrease total voltage of ST-MFC. Therefore, connecting MFC units in parallel might be more appropriate way than series connections to enhance power production of stacked MFC.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.24-34
• /
• 2008

To mitigate the climate change and global warming, various technologies have been internationally proposed for reducing greenhouse gas emissions. Especially, in recent, carbon dioxide capture and storage (CCS) technology is regarded as one of the most promising emission reduction options that $CO_2$ be captured from major point sources (eg., power plant) and transported for storage into the marine geological structure such as deep sea saline aquifer. The purpose of this paper is to review the latest progress on the development of technologies for $CO_2$ storage in marine geological structure and its perspective in republic of Korea. To develop the technologies for $CO_2$ storage in marine geological structure, we carried out relevant R&D project, which cover the initial survey of potentially suitable marine geological structure fur $CO_2$ storage site and monitoring of the stored $CO_2$ behavior, basic design for $CO_2$ transport and storage process including onshore/offshore plant and assessment of potential environmental risk related to $CO_2$ storage in geological structure in republic of Korea. By using the results of the present researches, we can contribute to understanding not only how commercial scale (about 1 $MtCO_2$) deployment of $CO_2$ storage in the marine geological structure of East Sea, Korea, is realized but also how more reliable and safe CCS is achieved. The present study also suggests that it is possible to reduce environmental cost (about 2 trillion Won per year) with developed technology for $CO_2$ storage in marine geological structure until 2050.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.1
• /
• pp.55-71
• /
• 1990

The purpose of this study is to find out the basic data for irrigation plans of red pepper and radish during the growing period, such as total amount of evapotranspiration, coefficent of evapotranspiration at each growth stage, the peak stage of evapotranspiration, the maximum ten day evapotranspiration , optimum irrigation point, total readily available moisture and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soil texture for split plot, and three levels ; irrigation point with pH1.7-2.0, pF2.1-2.4 and pF2.5-2.8, at soil texture of sandy soil, sandy loam and silty clay for both red pepper and radish, with two replications. The results obtained are summarized as follows. 1.1/10 exceedance probability values of maximum total pan evaporation during growing period for red peppr and radish were shown as 663.6 mm and 251.8 mm. respectively, and those of maximum ten day pan evaporation for red pepper and radish, 67.1 mm and 46.9 mm, respectively. 2.The time that annual maximum of ten day pan evaporation can he occurred, exists at any stage between the middle of May and the late of August for red pepper, and at any stage between the late of August and the late September for radish. 3.The magnitude of evapotranspiration and its coefficient for red pepper was occurred large in order of pF1.7-2.0 pF2.1-2.4 and pF2.5~2.8 in aspect of irrigation point and the difference in the magnitude of evapotranspiration and of its coefficient between levels of irrigation point was difficult to be found out due to the relative increase in water consumption resulted from large flourishing growth at the irrigation point in lower water content for radish. In aspect of soil texture they were appeared large in order of sandy loam, silty clay and sandy soil for both red pepper and radish. 4.The magnitude of leaf area index was shown large in order of pF2.1-2.4, pF2.5-2.8, and pFl.7-2.0, for red pepper and of pF2.5-2.8, pF2.1-2.4, pFl.7-2.0 for radish in aspect of irrigation point, and large in order of sandy loam, silty clay, sandy soil for both red pepper and radish in aspect of soil texture 5.1/10 exceedance probability value of evapotranspiration and its coefficient during the growing period for red pepper were shown as 683.5 mm and 1.03, respectively, while those of radish, 250.3 mm and 0, 99. respectively. 6.The time that the maximum evapotranspiration of red pepper can be occurred is in the middle of August around the date of ninetieth to hundredth after transplanting, and the time for radish is presumed to be in the late of September, around the date of thirtieth to fourtieth after sowing. At that time, 1/10 exceedance probability value of ten day evapotranspiration and its coefficient for red pepper is assumed to be 81.8 mm and 1.22, respectively, while those of radish, 49, 7 mm and 1, 06, respectively. 7.Optimum irrigation point for red pepper on the basis of the yield of raw matter is assumed to be pFl.7-2.0 for sandy soil, pF2.5-2.8 for sandy loam, and pF2.1-2.4 for silty clay. while that for radish is appeared to be pF2.5-2.8 in any soil texture used. 8.The soil moisture extraction patterns of red pepper and radish have shown that maximum extraction rates exist at 7 cm deep layer at the beginning stage of growth in any soil texture and that extraction rates of 21 cm to 35 cm deep layer are increased as getting closer to the late stage of growth. And especially the extraction rates have shown tendency to be greatest at 21cm deep layer from the most flourishing stage of growth for red pepper and at the last stage of growth for radish. 9.The total readily available moisture on the basic of the optimum irrigation point become 3.77-8.66 mm for sandy soil, 28.39-34.67 mm for sandy loam and 18.40-25.70 mm for silty clay for red pepper of each soil texture used but that of radish that has shown the optimum irrigation point of pF2.5-2.8 in any soil texture used. 12.49-15.27 mm for sandy soil, 23.03-28.13 mm for sandy loam, and 22.56~27.57 mm for silty clay. 10.On the basis of each optimum irrigation point. the intervals of irrigation date at the growth stage of maximum consumptive use of red pepper become l.4 days for sandy soil, 3.8 days for sandy loam and 2.6 days for silty clay, while those of radish, about 7.2 days.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.3
• /
• pp.41-56
• /
• 1989

The purpose of this study is to find out the basic data for irrigation plans of garlic and cucumber during the growing period, such as total amount of evapotranspiration, coefficients of evapotranspiration at each growth stage, the peak stage of evapotranspiration and the maximum evapotranspiraton, optimum irrigation point, total readily available moisture, and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soil texture for split plot, and three levels ; irrigation points with pP 1.7-2.1, pP 2.2-2.5, pP 2.6-2.8, for garlic and those with pP 1.9, pF 2.3, pP 2.7, for cucumber, soil textures of silty clay, sandy loam and sandy soil for both garlic and cucumber, with two replications. The results obtained are summarized as follows 1.There was the highest significant correlation between the avapotranspiration of garlic and cucumber and the pan evaporation, beyond all other meteorological factors considered, as mentioned in the previous paper. Therefore, the pan evaporation is enough to be used as a meteorological index measuring the quantity of evapotranspiration. 2.1/10 probability values of maximum total pan evaporation during growing period for garlic and cucumber were shown as 495.8mm and 406.8mm, respectively, and those of maximum ten day pan evaporation for garlic and cucumber, 63.8mm and 69.7mm, respectively. 3.The time that annual maximum of ten day pan evaporation can be occurred, exists at any stage between the middle of May and the late of June(harvest period) for garlic, and at any stage of growing period for cucumber. 4.The magnitude of evapotranspiration and of its coefficient for garlic and cucumber was occurred in the order of pF 1.7-2.1>pF 2.2-2.5>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF2.7 respectively in aspect of irrigation point and of sandy loam>silty clay>sandy soil in aspect of soil texture for both garlic and cucumber. 5.The magnitude of leaf area index was shown in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 for garlic and of pF 1.9>pF 2.3>pF 2.7 for cucumber in aspect of irrigation point, and of sandy loam>sandy soil>silty clay in aspect of soil texture for both garlic and cucumber. 6.1/10 probability value of evapotranspiration and its coefficient during the growing period for garlic were shown as 391.7mm and 0.79 respectively, while those of cucumber, 423.lmm and 1.04 respectively. 7.The time the maximum evapotranspiration of garlic can be occurred is at the date of thirtieth before harvest period and the time for cucumber is presumed to be at the date of sixtieth to seventieth after transplanting, At that time, 1/10 probability value of ten day evapotranspiration and its coefficient for garlic is presumed to be 65.lmm and 1.02 respectively, while those of cucumber, 94.8mm and 1.36 respectively. 8.In aspect of irrigation point, the weight of raw garlic and cucumber were increased in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF 2.7 respectively. Therefore, optimum irrigation point for garlic and cucumber is presumed to be pF 2.2-2.5 and pF 1.9 respectively, when the significance of yield between the different irrigation treatments is considered. 9.Except the mulching period of garlic that soil moisture extraction patterns were about the same, those of garlic and cucumber have shown that maximum extraction rate exists at 7cm deep layer at the beginning stage after removing mulching for garlic and at the beginning stage of growth for cucumber and that extraction rates of 21cm to 35cm deep layer are increased as getting closer to the late stage of growth. 10.Total readily available moisture of garlic in silty clay, sandy loam, sandy soil become to be 18.71-24.96mm, 19.08-25.43mm, 10.35- 13.80mm respctively on the basis of the optimum irrigation point with pF 2.2-2.5, while that of cucumber, 11.8lmm, 12.03mm, 6.39mm respectively on the basis of the optimum irrigation point with pF 1.9. 11.The intervals of irrigation date of garlic and cucumber at the growth stage of maximum consumptive use become to be about three and a half days and one and a half days respectively, on the basis of each optimum irrgation point.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.541-548
• /
• 2002

This study, consisting of two experiments, was conducted to determine the effects of feeding heat treated protein and mineral complex (HPM) on milk production and composition, and ruminal fermentation of Holstein dairy cows. In in vitro experiment, HPM levels were 0, 0.2, 1 and 2%, and Timothy hay, which was substrate, was milled as 1 mm size, and the effects of HPM on pH, ammonia and VFA were analyzed after incubation times of 0, 6, 12, 24 and 48 h, respectively. The pH and ammonia production were not significantly different between treatments during the incubation. In addition, generally, total VFA and individual VFA were not affected by HPM on 0, 6 and 24 h. While, total VFA and individual VFA were increased in 0.2% and 1% of HPM supplemented treatments, but decreased in 2% of HPM treatment compared with control on 12 h. On 48 h, total VFA and individual VFA were increased in HPM treatments compared to control (P<0.05). However, A/P ratio was not affected by HPM supplementation. Gas production was higher in HPM treatment compared to control on 24 h (P<0.05) and 48 h (P<0.05). In lactating experiment, fourteen lactating Holstein cows were used for 4 months in a cross over experimental design. There were two treatments; no added HPM as a control and 0.2% of HPM added as a test treatment. Daily milk yield (P<0.001), 4% FCM (P<0.001), milk protein (P<0.05) and SNF (solid not fat; P<0.05) were increased in HPM treatment compared to control. While, milk fat, MUN (milk urea nitrogen) and SCC (somatic cell count) were not significantly different between treatments.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.549-560
• /
• 2002

This study, including two in vitro experiments and an in vivo experiment were conducted to evaluate effects of Passtein$^{(R)}$ on crude protein degradability, ruminal fermentation characteristics and nutrient digestibility. In in vitro experiment protein degradability was examined using borate-phosphate buffer and neutral detergent, and using protease from Stroptomyces griseus at 39$^{\circ}C$ for 0, 2, 4, 8, 12, and 48 h. In addition, an in vivo experiment was conducted in a switch back design and ruminal fermentation and nutrient digestibility were determined. Four ruminal-fistulated Holstein cows weighing 300kg in mean body weight randomly allotted to 2 treatments (control and Passtein$^{(R)}$ supplementation). Although there was no significant difference on protein fraction between treatments, it appears that Passtein$^{(R)}$ supplementation decreased buffer soluble protein fraction compared to control. Protein degradability was not affected by Passtein$^{(R)}$ from 0 h to 4 h, but decreased at 12 h and 48 h compared to control. Degradation of immediately degradable fraction was higher in Passtein$^{(R)}$ treatment, but degradation of fermentable fraction was lower in Passtein$^{(R)}$ treatment compared to control. The pH and $NH_3$-N concentration tended to increase in Passtein$^{(R)}$ treatment, but VFA production, microbial counts and enzyme activity tended to decrease in Passtein$^{(R)}$ treatment compared to control. In addition, nutrient digestibility in the total tract tended to increase in Passtein$^{(R)}$ treatment compared to control.