• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2001.12a
• /
• pp.52-60
• /
• 2001

Purpose: We performed a randomized, double-blind, placebo-controlled trial in mild to moderate myopia patients to evaluate the benefit of taking a nutrient supplement containing anthocyanoside oligomers for improving nocturnal visiual function and/or clinical symptoms. Methods: The subjects included have refractive error between -lD(Diopters) $\~$-8D in both eyes, symptoms of decreased night vision and asthenopia based on the scoring result of a pre-structured questionnaire, and abnormal results of mesopic contrast sensitivity(MCS) screening test showing abnormal curve of contrast sensitivity in the middle and high frequency level, between 6.0 and 30.0 CPD(Cycles per degree) at mesopic condition(-2$\~$0 log cd/$m^2$). Total 60 people who qualified the criteria above were enrolled and the subjects were instructed to take the investigational product (anthocyanoside or placebo) twice daily for a 4 week period. The enrolled subjects were investigated for nocturnal vision performance by MCS and clinical symptoms at their first visit and re-evaluated at post-intervention (4 weeks later). MCS was measured and improvement of contrast threshold level according to each CPD was calculated by subtracting initial values from final values. Age, refractive error, and MCS were compared between the placebo and anthocyanoside. Results: After 4 weeks of drug administration 22 of the anthocyanoside group showed symptom improvement compared to 1 of the placebo group (p=0.000). Contrast sensitivity levels according to each CPD before and after drug treatment showed significant improvement in the anthocyanoside group but not in the placebo group. Mean MCS change of anthocyanoside group is 2.41$\pm$1.91 which showed significant improvement compared to -0.40$\pm$2.47 of the placebo group(p=0.000). MCS changes of anthocyanoside group showed significant improvement compared to placebo group in all levels of CPD(p<0.05). During our investigation none of the subjects complained of specific side effects related to anthocyanoside use. Conclusion: Our results show that under careful selection of people with significant symptoms and definite MCS abnormalities, anthocyanoside oligomers may improve the subjective symptoms and objective MCS results.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.111-123
• /
• 2016

The purpose if this study was to find and investigate effective mediation factors influencing performance of servitization through servitization acceptance activities by means of empirical results. According to the previous researches, two main mediation factors which were related with servitization competencies such as ICT competency of servitization and competency of servitization process were distinguished from lots of competencies which are relying on servitization process. Using a 373 sample data investigated from CEOs, directors and managers of small and medium sized firms in Korea, the structured mediation model was proposed. The measurement for the each variable was accepted for this study when the respondents were revealed to understand the servitization concepts which explained especially company's business moving towards the service specific gravity from selling existing products. The measurement for the each variable reflected that respondents were participating in any sort of servitization type or had intension to be involved with any servitization categories. The mediation hypotheses were tested in the way of analytical measures with the result of strong reliability. According to analysis, two mediators showed positive mediation role and statistically adopted between servitization acceptance activities and servitization performance in the 99% significant level. We confirmed that ICT competency of servitization and competency of servitization process were in the role of positive mediation between servitization acceptance activities and performance of servitization. The total of indirect effects were 0.2546 to support each mediation hypotheses. Tested two mediators were not on the same level. The most affecting mediation element on servitization performance was appeared as competency of servitization process. With the result of this study, we expect that the small and medium sized companies might have servitization business strategies including proper service competencies and mediators through acceptance activities to obtain suitable performance. According to the analysis, Companies which consider product-servitization need to set strategies to reinforce above two competencies.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.415-422
• /
• 2004

Automation systems improve the productivity of works which relate to product design, facilities management, fault processing and quality evaluation. In these systems, the description language for monitoring and control process is called new control language. These are five flow control languages : IL, ST, FBD, SFC and LD. IL and ST are based on left form. FBD, SFC and LD are based on graphic form. Generally, a software which monitors and controls a system is allowed to use just one flow control language. It is impossible to use more than two languages for simulation in the same system environment. In this paper, we analyzed the characteristics of flow control languages and the process of programming in the legacy system. In addition, for the Integrated processing of languages, we propose Extended ST based on the high-level ST language. Based on this research, we implement a graphical language editor and EST-IL convertor. The graphical language editor makes sequence rules, and converts graphical language into EST. EST-IL convertor has a function to convert EST into IL which is similar to assembly language. As the result of this paper, we present a scheme which integrates all the flow control language processing based on IL.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.149-157
• /
• 2019

This study analyzed the impact of various factors on the use-diffusion of smart speakers. 300 survey responses of Chinese consumers were analyzed using structured models. The results show that both autonomy and adaptability had significant impacts on perceived usefulness and perceived easy of use. Multifunctionality and ability to cooperate affected perceived usefulness, while reactivity did not affected perceived usefulness or perceived easy of use. Anthropomorphism increased perceived enjoyment. Both perceived usefulness and perceived easy of use have been identified to improve the use-diffusion of smart speakers. Perceived enjoyment enhanced the variety of use. We expect these results help understand the factors that need to be considered for the design or marketing communication of smart products.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.170-185
• /
• 2019

This study is intended to look into the structural relationship between SCM activity, process innovation and quality performance in small and medium sized enterprisers(SMEs). To achieve this, a survey was empirically carried out to 354 SCM operating officers and managers who perform the SCM activities in small and medium sized manufacturing firms. The results are summarized as follows. Overall, the SCM activity and process innovation had a significant effect on the quality performance, having a structural relationship with the quality performance in SEMs. This implies that the strategic alliance of the SCM activities and competence concentration based on technology development in SEMs can organize the unity through organizational members' information sharing. In other words, when the information integration supports the compatibility and reliability of shared information system by raising technological competence through this, the process innovation can lead to non-financial cost reduction, product quality, delivery compliance and inventory cost reduction as quality performance of the structured process, management and distribution.

• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.353-366
• /
• 2021

In this study, photocatalytic degradation of ammonia in petrochemical wastewater is investigated by solar light photocatalysis. Two-dimensional ultra-thin atomic layer structured MoS₂ are synthesized via a simple hydrothermal method. We examine all prepared samples by means of physical techniques, such as SEM-EDX, HRTEM, FT-IR, BET, XRD, XPS, DRS and PL. And, we use fullerene modified MoS₂ nanosheets to enhance the activity of photochemically generated oxygen (PGO) species. Surface area and pore volumes of the MoS₂-fullerene samples significantly increase due to the existence of MoS₂. And, PGO oxidation of MB, TBA and TMST, causing its concentration in aqueous solution to decrease, is confirmed by the results of PL. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the PGO effect increase in the case with modified fullerene. The experimental results show that this heterogeneous catalyst has a degradation of 88.43% achieved through visible light irradiation. The product for the degradation of NH₃ is identified as N₂, but not NO^2- or NO^3-.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.24-33
• /
• 2022

Fiber-reinforced plastics(FRPs) have excellent specific stiffness and strength, so they are usually used as automotive parts that require high rigidity and lightweight instead of metal. However, it is difficult to predict the mechanical properties of injection molded parts due to the fiber orientation and breakage of FRPs. In this paper, the fiber orientation characteristics and mechanical properties of injection molded specimens were evaluated in order to fabricate automotive transmission side covers with FRPs and design a rib structure for improvement of their rigidity. The test molds were designed and manufactured to confirm the fiber orientation characteristics of each position of the injection molded standard plate-shaped specimens, and the tensile properties of the specimens were evaluated according to the injection molding conditions and directions of specimens. A gusset-rib structure was designed to improve the additional structural rigidity of the target products, and a proper rib structure was selected through the flexural tests of the rib-structured specimens. Based on the evaluation of fiber orientation and mechanical characteristics, the optimization analyses of gate location were performed to minimize the warpage of target products. Also, the deformation analyses against the internal pressure of target product were performed to confirm the rigidity improvement by gusset-rib structure. As a result, it could be confirmed that the deformation was reduced by 27~37% compared to the previous model, when the gusset-rib structure was applied to the joining part of the target products.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.177-187
• /
• 2005

This article examined how the amount of information presented in ad design affect consumer's evaluation on the ad Existing researches have mainly considered external information presented in the ad from the resource principle perspective. This study investigated how internal information processing such as imagery information processing caused by brand names moderates persuasion effects according to the amount of external information through two experiments. The experiments leave us the conclusion that brand names presented in the ads stimulate imagery information processing when surplus cognitive resources do exist and they lead ad recipients' evaluation to positive direction in prestige brand condition and to the contrary to negative direction in non-prestige brand condition. The results contribute to the direction of ad design in that ad needs not contain as muck product-related information as needed in order to increase persuasion effects in prestige brand condition. Rather, it's necessary to leave the room for internal information processing such as imagery information processing by well structured brand equity. On the contrary, non-prestige brand needs to contain explicit product-relevant information to exert a potent influence on a4 persuasion. We hope this study result is helpful for design direction of advertisement in order to heighten persuasion effects toward ad recipients.

• Archives of design research
• /
• v.17 no.3
• /
• pp.413-420
• /
• 2004

New design method has been required for web designers to grasp the proper emotion, impression, and feeling of a web site and reflect these elements in web design. It is certain that such a new methodology can be a useful design tool, although web designers have only relied on their intuition and experience to induce users to perceive specific emotion of web sites. In this study, Kansei Engineering Type Ⅰ (Nagamachi, 2002 and Park, 2000) method was applied to develop the methodology. One hundred thirty six web sites believed to convey emotions effectively were first selected by recommendation of professional web designers and twenty two web sites were finally chosen and evaluated using questionnaire. The web sites were then objectively and quantitatively assessed by measuring the degree of utilization of the design elements, balance, overall density, and homogeneity. We examined the cause-and-effect between the results of emotional and quantitative analysis by multiple regression and introduced the design methodology based on the examination. The research method and procedures applied to this study would be applicable to design studies related to the emotional inducement.

• Journal of KIISE:Software and Applications
• /
• v.37 no.12
• /
• pp.909-918
• /
• 2010

To analyze the national competitiveness of Korea leads to the conclusion that global high-tech enterprises have been playing leading and pulling roles in making Korea in line with advanced countries even though the country is lacking in various natural resources. The characteristics of these companies above are as follows; Firstly, these enterprises continue to accumulate core technologies and know-how with highly competent human resources and well-organized management. Secondly, they are well structured and equipped with information technology infrastructures which are, for example, ERP, SCM, CRM, and PLM. Among them PLM is considered to be the principal core information technology infra in manufacturing industry. The urgent task of manufacturing industry recently is to develop new products to accept various needs of consumers, and to launch the products in time to market, which requires the manufactures to be equipped with product development infra and system to upgrade product fulfillment and mass production system in a short period. The introduction of PLM System is a solution of core strategy as a manufacturer for collaboration, global development, reengineering of manufacturing system, the innovation and efficiency of manufacturing process, and product quality improvement. The purpose of this study is to analyze the success factors of introducing PLM System and its practicing effectiveness. And the results of empirical study are as follows; (1) Technical success factors positively impact system quality and user satisfaction, (2) Organizational success factors positively impact system quality, but does not impact user satisfaction, (3) Environmental success factors positively impact system quality and user satisfaction, (4) System quality positively impacts user satisfaction, (5) User satisfaction positively impacts the effectiveness of implementing PLM systems, but system quality does not impact it.