• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.80-85
• /
• 2002

Train crashes involve complex interaction between deformable bodies in multiple collisions. The purpose of this study is to suggest the effective analytical procedure using hybrid model fur the crashworthiness of motorized trailer of high speed train. The hybrid approach, with very short modeling times and reduced computation times to extract the global behaviour and to perform a pre-optimization of the considered structure. Firstly, various types of crash events are investigated and the conditions for numerical simulation are defined. In this paper, the structural stiffness and crashworthiness of Korean High Speed Train trailer was examined through FE analysis. Crash analyses on energy absorbing part and safety zone were carried out to determine each section force.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.111-112
• /
• 2013

An experimental study of a dual swirl burner was conducted to analyze NOx emission in the lean conditions. The dual swirl burner is composed of a combination of swirling jet premixed(main section) and diffusion flames(pilot section). It was operated with a co-swirling configuration and overall equivalence ratios between 0.6 and 0.8. The purpose of this study is to analyze experimentally the characterization of flame temperature and NOx concentration in reacting zone and to supply the useful experimental data for numerical simulations. The measurements of temperature and NOx concentration were captured using a thin digitally-compensated thermocouple and a sampling quartz probe with quenching effect of sudden expansion, and were measured by the NOx analyzer of chemiluminescence method. We could analyse the NOx emission characteristics comparing the temperature distributions in the lean equivalence ratios.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.84.3-84.3
• /
• 2019

We investigate 3D radiation-hydrodynamics (RHD) for surface convection of the solar-type low-mass stars (M = 0.8, 0.9, and 1.0 Msun). The outer convection zone (CZ) of low-mass stars is an extremely turbulent region composed of partly ionized compressible gases at high temperature. Particularly, the super-adiabatic layer (SAL), the top of the CZ is the transition region where the transport of energy changes drastically from convection to radiation. In order to accurately describe physical processes, a realistic treatment of radiation should be considered as well as convection. As a starting model, the initial stratification in the outer envelope calculated using the solar calibrations in the context of the standard stellar theory. When the numerical fluid becomes thermally relaxed, the thermodynamic structure of the steady-state turbulent flow was explicitly collected. In this presentation, we compared thermodynamic properties of turbulent convection of the solar-type low-mass stars.

• Maritime Security
• /
• v.1 no.1
• /
• pp.273-310
• /
• 2020

This study aims at empirically analyzing the overall mechanism of the "Gray Zone Strategy", which has begun to be used as one of Chinese major maritime security strategies in maritime conflicts surrounding the South China Sea and East China Sea since early 2010, and comparing the resulting conflict patterns in those reg ions. To this end, I made the following two hypotheses about Chinese gray zone strategy. The hypotheses that I have argued in this study are the first, "The marine gray zone strategy used by China shows different structures of implementation in the South China Sea and the East China Sea, which are major conflict areas.", the second, "Therefore, the patterns of disputes in the South China Sea and the East China Sea also show a difference." In order to examine this, I will classify Chinese gray zone strategy mechanisms multi-dimensionally in large order, 1) conflict trends and frequency of strategy execution, 2) types and strengths of strategy, 3) actors of strategy execution, and 4) response methods of counterparts. So, I tried to collect data related to this based on quantitative modeling to test these. After that, about 10 years of data pertaining to this topic were processed, and a research model was designed with a new categorization and operational definition of gray zone strategies. Based on this, I was able to successfully test all the hypotheses by successfully comparing the comprehensive mechanisms of the gray zone strategy used by China and the conflict patterns between the South China Sea and the East China Sea. In the conclusion, the verified results were rementioned with emphasizing the need to overcome the security vulnerabilities in East Asia that could be caused by China's marine gray zone strategy. This study, which has never been attempted so far, is of great significance in that it clarified the intrinsic structure in which China's gray zone strategy was implemented using empirical case studies, and the correlation between this and maritime conflict patterns was investigated.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.29-35
• /
• 2011

In order to effectively control waves in a coastal zone, Multi-Cylinder Piles have been suggested as economic structures. A numerical analysis was conducted using the Delft-3D: WAVE module based on SWAN, which considered wave shoaling and refraction. Moreover, irregular waves were used to investigate the hydrodynamic characteristics of the wave interaction with the structure. In this paper, a numerical analysis was carried out to research the effect of wave control through a wave height analysis concerning an existing, concrete wave breaker and multi-cylinder piles placed at the same location. As a result, the effect of the wave control is shown using the wave breaker, multi-cylinder piles, and existing data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.488-493
• /
• 1994

The global stability of model reference adaptive control system (MRACS) in the ideal case was resolved in the 1980's. Hoever the improvement of the transient, behaviour of MRACS has not been discussed sufficiently even in the ideal case. Only a few attempts have so far been made at the application of MRACS to the practical systems in contrast to the theoretical systematization. Therefore, when we consider the practical usage of MRACS it is necessary to develop an improved design scheme with respect to transient behaviour. In this paper, we propose two design schemes improving transient behaviour of MRACS by mollifying the input synthesis in the conventional design scheme of MRACS. We present a design scheme of MRACS in which we utilize the design approach of variable structure system(VSS). After describing the above design scheme, we also propose the improved design scheme in which we introduce the dead-zone decided by the magnitude of the output-error between the plant and the reference model. The effectiveness of the proposed two design schemes are shown through computer simulations. As the results, by using these methods, the convergence of the transient response is greatly improved in comparison with the conventional one.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.101-110
• /
• 2004

This paper presents an analysis of heating energy for apartment houses in a Korean-style apartment building, paying special attention on the effect of their location. Six representative locations encompass three floors and two placements on each floor. Two different roof types are also considered. In order to incorporate actual tenant's refit, a five-zone model composed of one conditioned and four unconditioned spaces is developed. TRNSYS 15 is adopted to estimate heating energy. The predicted results show fairly good agreements with the available measured data, validating the present model. Heating energy needed for an apartment located at the uppermost and lowermost floors is far greater compared with the case of intermediate floors. In addition, an appreciable difference is found between apartment with and without side end wall. Insulation thickness of walls, floors and underground structure appears to be a dominant factor affecting heating energy, which leads to needs of revision of the related regulation. Ridged-roofs instead of flat-roofs are highly recommended in apartment buildings for effective energy saving. It is finally concluded that the location-dependent, severe imbalance in heating energy should be improved and/or reflected in the policy making process and design standards.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.265-270
• /
• 1989

The present study considers the thermal structure variation in a porous medium caused by changing the most important radiative property of porous medium, absorption coefficient, as well as altering the physical dimension of porous medium and the equivalence ratio of premixed gas mixture. The radiation model was introduced as an unsteady differential form using the two-flux gray radiation model. The role of the conductive heat transfer through both gas phase and porous medium was found to be almost insignificant compared with that of the radiative heat transfer. The reaction zone shifted upstream and the flame thickness decreased as either the geometrical length of porous medium increased or the absorption coefficient decreased.

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.71-78
• /
• 1989

In this paper a computer program for displacement control method was developed, in which a certain displacement of the structure is increased and the applied loads and another displacements are obtained. To simplify the nonlinear structural analysis, the relationships of moment-curvature were linearized as elasto-softening model for over-reinforced concrete beam and as elasto-plastic-softening model for under-reinforced concrete beam. Since the result of the analysis of reinforced concrete beam depended on the element size beyond elastic zone, the relationship of moment-curvature was modified for each element by using the concept of fracture energy approach. Overall, analytical results accurately predicted the load-displacement behavior of reinforced concrete beams.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.1
• /
• pp.120-130
• /
• 1994

The purpose of this study is to propose the analytical model for the hysteretic behavior of Reinforced Concrete bearn-column joints under various loading history. Discrete line elernents , YVith inelastic rotational spring was adopted to consider the movement of plastic hinging zone influenced by the details of longitudinal reinforcements. Also hysteretic model was constructed by excluding such variables which can not be utilized in dynamic analysis of Reinforced Concrete. structure that it will be adoptable in two-dimensional inelastic frame ardysis with 6-DOF. From the analysis of previous test results, it was found that stiffness deterioration caused by inelastic hysteretic loadings can be predicted by the functron of basic pinching coefficients, ductility ratio.and yield strength ratio of members. Strength degradation coefficients were newly proposed to explain the difference of inelastic behavior of members caused by spacing ratio of transverse steel and sectlon aspect ratio. The energy dissipation capacities calculated using the analytical model proposed in thls paper show a good agreements w~lh test results by an error of 10~20%.