• 제목/요약/키워드: structure of stand

검색결과 418건 처리시간 0.028초

A Study on Photovoltaic/Wind/Diesel Hybrid Power System

  • Jeong, Byung-Hwan;Cho, Jun-Seok;Gho, Jae-Seok;Choe, Gyu-Ha;Kim, Eung-Sang;Lee, Chang-Sung
    • Journal of Power Electronics
    • /
    • 제3권1호
    • /
    • pp.40-48
    • /
    • 2003
  • In this paper, a hybrid power system with photovoltaic/wind/diesel generators is proposed to solve the defect of stand-alone type power system in a remote area. A hybrid power system has a power-balanced controller to equilibrate generation power with a given load demand and which is composed of common DC power system. To execute a power-balanced control, a hybrid power system is assumed that all of power generators have the characteristics of an equivalent current-source and load sharing control technique must be needed at the same time. So this paper discusses the structure of power-balance control for hybrid power system. And through the results of simulation, the proposed scheme was verified.

코스닥기업의 소유구조와 대리비용 (The Agency Costs and Ownership Structure of the companies listed on the KOSDAQ)

  • 황동섭
    • 산업경영시스템학회지
    • /
    • 제28권1호
    • /
    • pp.105-113
    • /
    • 2005
  • I investigate whether the efficient ratios used as the proxies of the agency costs maintained by Ang et al.(2000) is significant. Utilizing a sample of 77 manufacturing companies listed on the KOSDAQ from the TS2000 of the KSDA, The results are as follows. Agency costs are found to be decreasing with the ownership share of controlling shareholders and accounting performance becomes higher. But firm value measured by Tobin's Q ratio becomes lower according as the ownership of the controlling shareholders increases. If agency costs decrease in proportion to controlling shareholder's share, firm value should be higher according to the agency theory by Jensen and Meckling(I976). But the results of the empirical test of this study are inconsistent with Jensen and Meckling's(1976). Therefore the following study on the more useful proxies stand for agency costs should be needed.

Front-to-Back Ratio Improvement of a Microstrip Patch Antenna Loaded with Soft Surface Structure in a Partially Removed Ground Plane

  • Lee, Hong-Min
    • Journal of electromagnetic engineering and science
    • /
    • 제12권4호
    • /
    • pp.247-253
    • /
    • 2012
  • This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna. The back radiation of the microstrip patch antenna is reduced by removing some metallic parts around the ground plane and placing a new soft-surface configuration, consisting of an array of stand-up split-ring resonators on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional microstrip patch antenna with a full ground plane of the same size, our proposed microstrip patch antenna experimentally achieves an improved F/B ratio of 9.6 dB.

Bath cryostat의 제작특성에 관한 연구 (A study on the construction characteristic of bath cryostat)

  • Kim, G.Y.
    • 한국정밀공학회지
    • /
    • 제10권2호
    • /
    • pp.138-145
    • /
    • 1993
  • The bath cryostat of cryogenic apparatuses which are generally used to study physical phenomena under low temperature and ultra low temperature has been desigened and constructed. The practical use of the cryostat is verified by the measurement of the storage life of liquid heloum and liquid nitrogen vessels. The cryostat consists of triple structure of high vacuum environment in order to minimize the evaporation rate of liquid helium and liquid nitrogen by thermal conductivity and radiant heat. The minimum thickness which can stand against inner and outer pressures is calculated from considering the strength of the material.

  • PDF

열연중 판 및 롤 프로파일 예측 시뮬레이터 개발 (AN INTEGRATED FINITE ELEMENT COMPUTER SIMULATOR FOR THE PREDICTION OF ROLL AND STRIP PROFILE IN HOT STRIP ROLLING)

  • 류성룡;김태효;황상무
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
    • /
    • pp.301-307
    • /
    • 1999
  • A three dimensional finite element-based computer simulator is presented for the analysis of the thermomechanical behaviors of rolls and strip during hot strip rolling. The simulator is capable of predicting the strip profiles in a 4 high mill stand, and in particular, can account for the effect of bender forces and pair cross angles. The structure of the simulator as well as various numerical schemes employed are described. The capability of the simulator is demonstrated through applications to some selected set of process conditions.

  • PDF

6kW 풍력발전기 타워-케이블계의 고유진동수 해석 (Natural Frequency Analysis of the Tower-Cable System of a 6kW Wind Turbine)

  • 김석현;박무열
    • 산업기술연구
    • /
    • 제29권A호
    • /
    • pp.3-8
    • /
    • 2009
  • Vibration characteristics of a 6kW stand alone W/T(wind turbine) system are experimentally and theoretically investigated. Vibration resonance of the tower-cable system is monitored and the data are analysed and compared with the analytical results. To predict the resonance speed of the cable supported W/T, Rayleigh-Ritz method is applied to the tower-guy cable coupled system. Parametric study on the relation of the cable tension, cable elasticity and resonance frequency is carried out. Results of the study are utilized to design the stable structure of small size wind turbines which consist of a pivoted tower and guy cables.

  • PDF

단조 반복하중이 작용하는 합성슬래브의 거동에 대한 실험적 연구 (An Experimental Study of the Composite Slab under a Repeated Loading)

  • 엄철환;김희철;박진영;서상훈
    • KIEAE Journal
    • /
    • 제7권5호
    • /
    • pp.143-148
    • /
    • 2007
  • The application of metal deck floor system is increasing gradually and especially for office buildings. In the cases of large parking structures and storage structures, the construction period and the cost can be reduced. Also the steel deck system can prevent the crack of a floor and reduce the retrofit expenses. However, the floor should stand for the repeated truck load which is relatively heavier repeated loading. The mechanical behavior of a slab under repeated load is also different from the static loading state. An evaluation of a structural capacity was performed in this study through the dynamic capacity evaluation experiment for an application of a composite deck floor system as a parking structure slab. The period of repeated loadings were set up as 25years and 960,000 times monotone cyclic loads were applied at the center of the specimens. The tension crack propagation and patterns at the center of specimens were examined.

전압보상 기능을 갖는 능동 전력 필터 (Active Power Filter with Voltage Compensating Function)

  • 강성곤;이광주;최기원;소정환;최규하
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.334-336
    • /
    • 1994
  • The conventional APF(Active Power Filter) system performs only function which is compensated for source harmonic by injecting harmonic compensation current as well as reactive power component by PWM. This paper presents a new APF which provides the combined functions of VC(Voltage Compensator) and conventional APF, because the structure of APF is similar to stand- alone UPS in parallel type. Single-chip microprocessor plays an important role in controlling each function. Simulation obtained from ACSL are shown to verify multi-functions of new APP.

  • PDF

Gap 모델을 이용한 광릉삼림군락의 천이에 대한 모의 실험 (Simulation of Forest Succession in Kwangnung Experimental Forest with Gap Model)

  • Han, You-Young;Park, Seung-Tai;Kim, Joon-Ho;Lee, Chang-Seok
    • The Korean Journal of Ecology
    • /
    • 제19권6호
    • /
    • pp.499-506
    • /
    • 1996
  • Forest stand development in Kwangnung Experimental Forest, Korea, was simulated with a forest succession gap model of the JABOWA/FORET type, in order to predict climax species and characterime the trend of community structure along the succession. The model runs for a period or 1, 000 yr and is based on the averaged successional characteristics of 50 forest plote with an individual size or 1/12 ha gap consisted of the 15 major tree species. The total bimass and leafarea index have arrived at a steady state since about 200 yr and these values are smaller than that or field survey. Carpinus cordata, C. laxiflora, Quercus mongolica and Q. serrata were epected to be climax species that represent about 86% or total biomass in later stage and these results coincided with the previous succession studies from field survey in the area.

  • PDF

공간 재구성을 위한 Digital Synectics에 관한 연구 (A Study on Digital Synectics for The Recomposition of Architectural space)

  • 이철재
    • 한국실내디자인학회논문집
    • /
    • 제41호
    • /
    • pp.266-274
    • /
    • 2003
  • Synectics is one of several techniques used to enhance brainstorming by taking a more active role and introducing metaphor and structure into the process. It is unclear at what level of specificity this should be formulated as a pattern. This thesis reviews recent computational as well as experimental work on analogical reasoning based on synectics. New results regarding information processing of analogical reasoning stages, major computational models and recent attempts to compare these models are reviewed. Computational models are also discussed in the computational as well as cognitive psychology perspectives. Future directions in analogical reasoning research are proposed. The following import is the need to accommodate the typology and normal assessment in the concrete circumstances where actual reasoning and problem solving take place. In order to get to this end, we used computational models by Thagard who take the stand of ‘Computational Philosophy of Science’, which assumes ‘Weak AI’ to explicate what constitute the very pecularity of Analogical Reasoning.