• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.295-304
• /
• 2000

Vertical measurement of CTDT at about 30 min intervals and spatial surface temperature, salinity, and concentration of suspended particulate matters were conducted to elucidate the character of water column and the dispersal pattern in a floating ice-dominated fjord, Marian Cove, West Antarctica. Marian Cove showed two distinct water layers in terms of turbidity; 1) cold, fresh, and turbid surface plume in the upper 2 m,2) warm, saline, and relatively clean Maxwell Bay inflow between 15-45 m in water depth. Thermal melting of Maxwell Bay inflow and tidewater glacier/floating ices developed the surface mixed layer and the activity of floating ices cause Maxwell Bay inflow to be unstable. Due to the unstable water column, the development of Maxwell Bay inflow and subsequent surface plume are not influenced by tidal frequency. Coastal current generated by strong northwesterly wind may extend warm, saline, and turbid surface plume into the central part of the cove along the northern coast via the western coast of Weaver Peninsula. Terrigenous sediments of meltwaters from the glaciated ice cliffs near the corner of tidewater glacier and some coasts enter into the cove and their dispersion depends upon the hydrographic regimes (tide, wind, wave etc.). At the period of spring tide, the strong wind stress with the northwesterly wind direction reserve suspended sediment-fed surface plume and so allow the possibility of deposition of terrigenous sediments within the basin of cove.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.488-495
• /
• 2012

The real-time indoor location technology using radio waves has been studied in a variety of environments. One of them, a ship which consists of steel structure has high reception rate but causes significant ranging error due to the reflection of radio waves. In order to reduce location measurement errors that occurs in such a environment, this paper, based on CSS of IEEE 802.15.4a, presents compensation algorithm for localization using modified bilateration and pyroelectric sensor in a ship. The proposed system reduces the number of fixed nodes by estimating the appropriate reception distance between mobile node and fixed node through the analysis of CSS characteristic in a narrow passage such as ship corridors. Also, in the corner section which the ranging errors are significantly fluctuated due to the reflection and diffraction of radio waves, we recognize the location by tracking the a moving section using modified bilateration technique and pyroelectric sensor. The experimental results show that the location accuracy and efficiency of the proposed algorithm are improved 86.2 % compared to general method.

• 한국해양학회지
• /
• v.30 no.3
• /
• pp.170-183
• /
• 1995

Eddies and surface current field in the southwestern part of the East Sea were investigated using satellite-tracked drifters, CTD, and ADCP from November 1992 to September 1993. Trajectories of surface drifters provided information for the first time on the meandering motion of the East Korean Warm Current in the Ullung Basin (referred as UB) and clearly indicated the existence of cyclonic and anticyclonic eddies of various scales. Anticyclonic eddies persisting for a relatively long period were observed in UB and the southwestern corner of the Northern (Japan) Basin (SNB), while a cyclonic eddy was found in the coastal area between Sokcho and Donghae during the summer. Analysis shows that the eddy in UB behaved as a stationary eddy at least during the observation period and the cyclonic eddy was closely related to the existence of a cold water mass. The anticyclonic eddy in SNB was larger than that in UB, but much elongated in shape. The eddy in UB is characteristic of major and minor axes of about 120 and 70 km, revolution period of 13.6 days, mean swirl velocity of about 24 cm/s, and mean eddy kinetic energy of 392 cm$\^$2//s$\^$2/. The eddy in SNB is described as follows; major and minor axes of 168 and 86 km, period of 14.9 days, mean swirl velocity of 29 cm/s and mean eddy kinetic energy of 629 cm$\^$2//s$\^$2/. The mean translational speed is about 3 cm/s for both eddies. The agreement of the surface current pattern in UB observed by ADCP with the geostrophic flow pattern may suggest that the eddy in UB was nearly in geostrophic balance. The eddy was found to be strongly bottom-controlled.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.52-57
• /
• 2014

The present study suggests the fundamental method for the prediction time of the fire origin by analyzing the combustion phenomenon of inflammable material in the building structure. The heat release rate (HRR) with time variant is evaluated for the interphone as a inflammable material, which is opted from the fire incidents in the stairwell. the fire dynamics simulator (FDS ver. 6.1) is applied in order to analyze the difference of the smoke inflow time to the downstair from the fire event area with various fire pattern. The results show that the maximum inflow time difference for the case of the interphone made from ABS materials is about 4.93 times with the input conditions of heat flux values and the environment in the FDS for the fixed stairwell which composed of total volume $291.3m^3$, floorage $23.3m^2$ and the height of each floor 2.5 m. This research can be practical information for the application method of simulation scheme with experimental data to the fire Identification.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.359-370
• /
• 2006

The objective of this study was to investigate the effect of excessive occlusal loading on stress distribution on four type of cervical lesion, using a three dimensional finite element analysis (3D FEA). The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. Four different lesion configurations representative of the various types observed clinically for teeth were studied. A static point load of 500N was applied to the buccal and lingual cusp (Load A and B). The principal stresses in lesion apex, and vertical sectioned margin of cervical wall were analyzed. The results were as follows 1. The patterns of stress distribution were similar but the magnitude was different in four types of lesion 2. The peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 3. The compressive stress under load A and the tensile stress under load B were dominant stress. 4. Under the load, lesion can be increased and harmful to tooth structure unless restored.

• Journal of architectural history
• /
• v.16 no.2
• /
• pp.137-152
• /
• 2007

The purpose of this article is making investigation of the principal composition of the twin-pagodas in Buddhist temple through ornaments of a case preserving relics of Buddha in the east and west pagodas of Gameunsa temple. This research has an important meaning in clarifying that the concept of placement two Buddhas together with lotus sutra, which was only applied to Bulkuksa temple, has been extended to Gameunsa temple. And this observation gave us a clear explanation for the principal composition at the twin-pagodas in Buddhist temple plans. The author obtained the following conclusion from this article : The cases preserving relics of the Buddha for the west and east pagodas are globally in similar form as the type of a royal palace. But the different points between eastern and western can be seen on the existence of Buddhist statues on the base floor, set-up of the gate at railings, and 4 lion statues at a coner of the base floor. In the western pagoda, there are Buddha statues above the base-floor of the cases preserving relics. These Buddha statues are composed of a boy monks and angels with playing music for the praise of the Sakyamuni Buddha lecturing the Lotus sutra at YoungChui Mountain. On the other hand, in the eastern pagoda, Buddha statues on the cases preserving relics are composed of a the Four Devas and monks as a defending God of the nation of Buddha. In the eastern pagoda, one can see something that does not exist in the western pagoda, which is a gate located in railing of a case preserving the relics. This gate described the scene of the Sakyamuni Buddha entering into the pagoda of 7 treasures. In a corner of the case preserving relics in the eastern pagoda, there is another thing which does not exist in the western pagoda. This is a sculpture of a lion which symbols the seat of Lion supporting the Buddha in the Dabotap(the pagoda of 7 treasures). When we observe the form and structure, the descriptions at the railings, the gate, the shrine, the statue of a lion, and the accessories in jewelries, at the cases preserving the relics in the eastern pagoda, one can realize that they have the same combination structures between the ones at Dabotaps in Bulguksa temple and those in China as well as in Japan, all of which represent the Gyun-Bo-Tap-Pum of Lotus Sutra. Among the distribution rules in the twin-pagodas in Buddhist temple, the application of the ideal of lotus was known to be effected only to Bulguksa temple. But from the result of the present article, it is more clearly proved by applying the Gameunsa temple that the distribution theory in the twin-pagodas in Buddhist temple was in fact based on the ideal of lotus.

• Journal of architectural history
• /
• v.29 no.2
• /
• pp.75-88
• /
• 2020

There are stone sculptures diversely shaped in several parts of Gyeongbokgung. Geunjeongjeon is a place where the stone sculptures are intensively placed among the various palace buildings of Gyeongbokgung, and it is more important because it contains the phases of the age of the dynasty and the symbolism of governing philosophy. What can be seen in the structure of auspicious animal sculptures is based on the form of instinctive thought that the heavenly and human order systems are in an organic correspondence with each other, especially with regard to astronomical events such as Samwon Sasin 12jisin 28su. The parts that have been interpreted only in Sasin and 12jisin in the interpretations such as wild dogs, Gyoryong, camels, wolves, and apes were able to clarify the contents by revealing the form of 28su. In particular, as Beopsu Ssangbeopsu at the corner may be related to the guardian deity who governs water, called Yimun, Chimi, and Chimun, it is one of Bibo's ways to protect the palace that was vulnerable to fire. In addition, the shape of the existing 28su placed Dambi, but Ha Woldae at the Geunjeongjeon was assumed to have a camel statue and a planned arrangement of double meaning with the Bibo form of Pungsu Sasinsa, and it is also a feature of the arrangement of Woldae at the Geunjeongjeon. The actual composition of auspicious animals at the Nambogye of Geunjeongjeon was in the order of Haechi, wild dogs, horses and Jujak, and the contents of "Gyeongbokgung Construction Daily Record" were in the order of Haechi, horses, wild dogs, and Jujak. As to different composition layouts, based on the contents of the "Gyeongbok palace Construction Daily Record", the composition of Samjae Cheonjiin (天地人) was interpreted differently from the conventional interpretation of the arrangement of Woldae. All of these forms are associated with defense systems in the four directions and have become animal representations of each direction. The auspicious animal statues placed on the railing of Geunjeongjeon Woldae can be seen as reflected in a single building with the three dimensional personality that includes Pungsu's Bibo personality with the symbolic meaning that reveals the centrality as Jeong Jeon, the nation's best politics let alone the ideological system of the ancient astronomical of the East called Men Heaven Unity.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.7
• /
• pp.5-14
• /
• 2020

Kansai International Airport (KIX) was opened in September 1994. Although 26 years have passed since the completion of the first island, long-term settlement is still in progress. This settlement occurs in the Pleistocene layer. For it is not easy to determine the permeability of the Pleistocene sand layer because the thickness and the degree of fine content in the horizontal direction are constantly changing. In addition, it is also a difficult to predict the interactive behavior of the ground due to the construction of the second phase island adjacent to it. In order to solve this problem, a two-dimensional finite element analysis considering elasto-viscoplastic was performed to evaluate the long-term deformation, including the interactive behavior of the alternating Pleistocene foundation due to the construction of two adjacent reclaimed islands. In general, two-dimensional analysis can be used when a section can represent the entire sections. However, Kansai Airport is an artificial reclaimed island so two-dimensional analysis cannot solve the problem such as the stress deformation in the corners of the island. Additionally, the structure of the actual sub-ground through physical exploration is non-homogeneity and its thickness is also not constant. Therefore, there are limitations for the two-dimensional analysis to explain the phenomena. That is, three-dimensional analysis is strongly required. Due to these demands, the author extended the existing two-dimensional program capable of elasto-viscoplastic analysis to three-dimensional and completed the verification of the three-dimensional program developed through one-dimensional consolidation analysis. In order to demonstrate the validity of the developed 3D program that has been verified, an analysis is performed under the same analysis conditions as the existing research using a two-dimensional program. The effectiveness of the developed 3D numerical analysis program was demonstrated by comparing the analysis results with the 2D results and actual measurement data.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.93-107
• /
• 2019

The purpose of this paper is to explore the application of Chinese traditional garden space construction principle studied by predecessors in modern park landscape, and to find more methods of traditional garden space construction inheritance and innovation through research. Tian Chaoyang's book "Fifteen Lectures on Chinese Classical Gardens and Modern Translation" mentions that Chinese traditional gardens are combining time and space, so he draws a brief pattern diagram containing the principle of the space construction. According to this principle of space construction, the researchers chose Qujiang Pool Heritage Park, which combines modern and traditional, then analyzed its spatial structure and and space elements. The results are as follows. The complex spatial structure of the park is composed of spatial boundary lines and spatial routes. The complex boundary space is composed of bridges, squares, plants, rows of buildings and other elements. The water space in the center of the park is designed in accordance with the traces of the historical water system, and its natural zigzag shoreline expands the water space. The central water space is divided into the big pool and the small pool, the Yanbo island and Bird island are created respectively. The building at the park boundary connects the park's interior and exterior. Most of the buildings in the park are located in the convex corner of the route or space. Through this research, it can be concluded that Qujiang park also applies the space construction principle combining time and space. And then, the garden elements of Qujiang park are recreating the history and culture of Qin, Han, Sui and Tang dynasties with modern methods, thus creating a park with Chinese regional characteristics. Since the Tang dynasty was the most prosperous period in Qujiang, the park was dominated by Tang culture. Through the research of this paper, we can see that the space construction principle of Qujiang Pool Heritage Park is the inheritance of the space construction principle of Chinese traditional garden. And the landscape element of Qujiang park is the landscape created by combining traditional history and culture, which is the innovative part of modern garden. Through this study, the creation of modern landscape with Chinese characteristics can provide some hints on the direction of inheritance and innovation.