• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.47-52
• /
• 2016

This paper presents a control method for the performance improvement of a proportional solenoid actuator using a Pulse Width Modulation (PWM) signal. It is very difficult to obtain excellent response performance from a proportional solenoid actuator using a simple proportional controller with no PWM signal or dither because the mass and structure of a proportional solenoid actuator changes according to the application target, friction force in the proportional solenoid tube, operating force and displacement range. To solve the above problems, first, a controller with a PWM function for experimenting with attraction force characteristics was designed and manufactured. Secondly, an experimental setup for solenoid performance measurement with a force sensor and a displacement sensor was also manufactured. The attraction force characteristics according to the frequency and duty ratio variations of a PWM signal were tested and the relationships among the frequency, duty ratio, plunger mass and friction characteristics were analyzed. Finally, response characteristics improvements for proportional solenoid actuators are discussed.

• Journal of Distribution Science
• /
• v.17 no.9
• /
• pp.35-45
• /
• 2019

Purpose - This study analyzes the relationship between inter-function coordination variables, competitor, customer and innovation orientation that has been developed by Narver & Slater (1990), also known as Market Orientation Strategy on SME Sutera's marketing performance, through direct and indirect effect relationships. Research design, data, and methodology - This study uses a sample of 168 respondents who are silk SME entrepreneurs in eleven Silk Craftsman sub-districts in Wajo Regency - South Sulawesi Province, Indonesia. Data collection using a questionnaire with a period between January - June 2019. Data analysis use PLS. The stages of testing the results of analysis go through several stages: the first stage, analysis of variable descriptions, the goodness of fit model (AVE, CR, Cronbach Alpha, R²) and hypothesis test. Results and Findings - From the fifteen hypothesis by direct and indirect effect state six hypothesis are rejected and eleven hypothesis are accepted. Overall, the concepts of Resource Based View theory (RBV) and Structure-Conduct- Performance theory (SCP) also provide a strategic picture for businessmen related to product innovation and service innovation and the urgency of regeneration in order to maintain the continuity of superior products in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.355-360
• /
• 2002

To calibrate a non-redundantly actuated parallel mechanism, one can find actual kinematic parameters by means of geometrical constraint of the mechanism's kinematic structure and measurement values. However, the calibration algorithm for a non-redundant case does not apply fur a redundantly actuated parallel mechanism, because the angle error of the actuating joint varies with position and the geometrical constraint fails to be consistent. Such change of joint angle error comes from constraint torque variation with each kinematic pose (meaning position and orientation). To calibrate a redundant parallel mechanism, one therefore has to consider constraint torque equilibrium and the relationship of constraint torque to torsional deflection, in addition to geometric constraint. In this paper, we develop the calibration algorithm fir a redundantly actuated parallel mechanism using these three relationships, and formulate cost functions for an optimization algorithm. As a case study, we executed the calibration of a 2-DOF parallel mechanism using the developed algorithm. Coordinate values of tool plate were measured using a laser ball bar and the actual kinematic parameters were identified with a new cost function of the optimization algorithm. Experimental results showed that the accuracy of the tool plate improved by 82% after kinematic calibration in a redundant actuation case.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.746-756
• /
• 1995

This paper describes the intractive visual programming environment using multi-view which shows the tools of visualization for called and the visualizations for called member-function flow in C＋＋ language. This research defines new visual symbols for class and constructs interactive visual programming environment of various views by using visual symbols. Our proposed interactive multi-view visual programming environment can represent visualization for representation of class and execution relationships between objects in the object-oriented language, which is easy to understand the structure of object-oriented program, therefore our proposed interactive visual programming environment enables easy program development, and can use of education and trainning for beginner in useful.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.27-39
• /
• 1996

A finite element analysis of a trunnion pipe anchor is presented. The structure is analyzed for the case of internal pressure and moment loadings. The stress results are categorized as average and linearly varying(through the thickness) stresses. The resulting stresses are interpreted per Section 111 of the ASME Boiler and Pressure Vessel Code from which the Primary(B$_1$) and Secondary(C$_1$) stress indices for pressure, the Primary(B$_2$) and Secondary(C$_2$) stress indices for moment are developed. Several analysis were peformed on various structural geometries in order to determine empirical relationships for the stress indices as a function of dimensionless ratios.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.235-242
• /
• 2016

In general, ship hull form design is carried out in two stages. In the first stage, the longitudinal variation of the sectional area curves is adapted from a similar mother ship to determine the volume distribution in ships. At this design stage, the initial design conditions of displacement, longitudinal center of buoyancy, etc. are satisfied and the global hydrodynamic properties of the structure are optimized. The second stage includes the local designing of the sectional forms. Sectional forms are related to the local pressure resistance in the fore- and aft-body shapes, cargo boundaries, interaction between the hull and propeller, etc. These relationships indicate that the hull sections need to be optimized in order to minimize the local resistance. The volumetric balanced (VOB) variation of ship hull forms has been suggested by Kim (2013) as a generalized, systematic variation method for determining the sectional area curves in hull form design. This method is characterized by form parameters and is based on an optimization technique. This paper emphasizes on an extensional function of the VOB considering a geometrical wave profile. We select a container ship and an LNG carrier to demonstrate the applicability of the proposed technique. Through analysis, we confirm that the VOB method, considering the geometrical wave profile, can be used as an efficient tool in the hull form design for ships.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.155-155
• /
• 2022

Low head, ogee spillways is popularly used to defense against floods as well as to provide water for irrigation. Spillway is also used to assess compliance with water quality regulations by controlling amount of discharge to the downstream of a channel. For the purpose of water resource management and/or environmental aspects as explained above, the flow discharge through spillways need to be correctly rated as a function of geometry and hydraulic variables. Typically, four flow conditions are encountered during the operation of spillway: (a) uncontrolled free flow (UF); (b) uncontrolled submerged flow (US); controlled free flow (CF); and controlled submerged flow (CS), and each condition has a unique rating equation. However, one of the tricky part of the spillway operation is finding correct flow type over the spillway because structures can operate under both submerged and free flow conditions, and the types are continuously changing over time depending on the amount of discharge, head water and tail water elevation. Quite obviously, if the wrong rating curve relationship is applied because of misjudgment of the flow type due to a transition, a serious error can occur. Thus, an hydraulic model study of one of spillway structure located in South Florida was conducted for the purpose of developing transition relationships. In this presentation, US to UF transition is highlighted.

• Journal of Korean Home Economics Education Association
• /
• v.24 no.2
• /
• pp.29-49
• /
• 2012

The purpose of this study is to look at families as presented on the technology-home economics subject of middle school. To do this, I analyzed the 2007 revised curriculum of the technology-home economics subject, 'Changing Families,' in 11 technology-home economics textbooks (8th grade). The findings are as follows. First, family-related chapters are expanded compared with the previous curriculum in the 2007 revised curriculum. In addition, the new version emphasizes understanding and acceptance of change in families to improve the family life of adolescents. Second, in the 11 types of technology-home economics textbooks, the focusing was on the meaning of the family, the family structure, the function of the family, family roles and family values. There were also no major differences in the aspect of development. Third, in the technology-home economics textbooks, the family was defined as the 'basic group of society', 'a group composed by blood relationships, marriage and adoption', 'an affective group' and 'cohabiting group'. At the same time, there were many cases in which the description of the family was overly romanticized. Such a description of the family does not match the individual family experience of an adolescent. Fourth, all of textbooks dealt with the diversity of the family structure, such as single-parent families, remarriages families, and multi-cultural families. However, the structural characteristics and problems with these types of families are excessively emphasized, which can result in students having stereotypical images of specific family types. Fifth, the explanation of the function of the family was similar among textbooks. The importance of intergenerational cooperation and gender equality was also emphasized. However, such a concept is not considered as proper in a modern society. Thus, the description of a family based on the nuclear family should be sublated. In addition, the explanation of families overall should be developed in such a way that adolescents can interpret their own family experience rather than as an enlightening declaration of the family which disregards the dynamic relationships individual families actually experience.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.61-76
• /
• 2015

In general, we have utilized the hierarchical concept tree as a crucial data structure for indexing huge amount of textual data. This paper proposes a generality rank-based method that can automatically develop hierarchical concept structures with the Wikipedia data. The goal of the method is to regard each of Wikipedia articles as a concept and to generate hierarchical relationships among concepts. In order to estimate the generality of concepts, we have devised a special ranking function that mainly uses the number of hyperlinks among Wikipedia articles. The ranking function is effectively used for computing the probabilistic subsumption among concepts, which allows to generate relatively more stable hierarchical structures. Eventually, a set of concept pairs with hierarchical relationship is visualized as a DAG (directed acyclic graph). Through the empirical analysis using the concept hierarchy of Open Directory Project, we proved that the proposed method outperforms a representative baseline method and it can automatically extract concept hierarchies with high accuracy.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.194-202
• /
• 2003

In this paper, we introduce a category of Multi-FNN (Fuzzy-Neural Networks) models, analyze the underlying architectures and propose a comprehensive identification framework. The proposed Multi-FNNs dwell on a concept of fuzzy rule-based FNNs based on HCM clustering and evolutionary fuzzy granulation, and exploit linear inference being treated as a generic inference mechanism. By this nature, this FNN model is geared toward capturing relationships between information granules known as fuzzy sets. The form of the information granules themselves (in particular their distribution and a type of membership function) becomes an important design feature of the FNN model contributing to its structural as well as parametric optimization. The identification environment uses clustering techniques (Hard C - Means, HCM) and exploits genetic optimization as a vehicle of global optimization. The global optimization is augmented by more refined gradient-based learning mechanisms such as standard back-propagation. The HCM algorithm, whose role is to carry out preprocessing of the process data for system modeling, is utilized to determine the structure of Multi-FNNs. The detailed parameters of the Multi-FNN (such as apexes of membership functions, learning rates and momentum coefficients) are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between approximation and generalization (predictive) abilities of the model. To evaluate the performance of the proposed model, two numeric data sets are experimented with. One is the numerical data coming from a description of a certain nonlinear function and the other is NOx emission process data from a gas turbine power plant.