• Computational Structural Engineering
• /
• v.28 no.3
• /
• pp.28-37
• /
• 2015

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.753-760
• /
• 2020

In this study, the structural safety of the bearing support was analysed by applying the vertical load (bearing design load) and horizontal load (horizontal force generated during an earthquake) using a precise three-dimensional numerical model. The results of stress and displacement of newly-poured concrete and welded rebars were confirmed numerically. Numerical results show that the increase in the horizontal force and the height of the beam causes the concrete cracking and the stress increase of the rebar connections due to the increase of the stress at the new concrete interface. Therefore, it was analyzed that the increase in the height of bearing support is directly related to the horizontal force and it is necessary to apply the bearing support height appropriate for the bearing support capacity. It was proposed that a method of setting the height of the bearing support suitable for the bearing capacity and determining the reinforcement by presenting the guideline with the correlation between the horizontal force acting on the bearing support and its height.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.169-173
• /
• 2020

The structural analysis was performed at this study when the axle was loaded by using a total of three automotive support beam models, models A, B and C. Comparing with three models A, B, and C, the equivalent stress is considered to be good for its durability because model C is less than the yield stress of the material. The maximum equivalent stresses happening at models A and B are 1.8 times and 2.5 times higher than the yield stress, respectively, indicating that the material is fractured. So, it does not seem to be efficient as a support beam. Model C can be applied efficiently to the improvement design of axle support beams in terms of durability compared to models A and B. The strength of automotive support beam can be evaluated by applying this research result to the automotive part. And it is seen that this study is adequate at the efficient design and aesthetic convergence practically.

• Women's Health Nursing
• /
• v.27 no.4
• /
• pp.307-317
• /
• 2021

Purpose: The purpose of this study was to develop and test the validity and reliability of the Korean version of the Perinatal Infant Care Social Support (K-PICSS) for postpartum mothers. Methods: This study used a cross-sectional design. The K-PICSS was developed through forward-backward translation. Online survey data were collected from 284 Korean mothers with infants 1-2 months of age. The 19-item K-PICSS consists of functional and structural domains. The functional domain of social support measures infant care practices of postpartum mothers. Exploratory factor analysis (EFA) and known-group comparison were used to verify the construct validity of the K-PICSS. Social support and postpartum depression were also measured to test criterion validity. Psychometric testing was not applicable to the structural social support domain. Results: The average age of mothers was 32.76±3.34 years, and they had been married for 38.45±29.48 months. Construct validity was supported by the results of EFA, which confirmed a three-factor structure of the scale (informational support, supporting presence, and practical support). Significant correlations of the K-PICSS with social support (r=.71, p<.001) and depression (r=-.40, p<.001) were found. The K-PICSS showed reliable internal consistency, with Cronbach's α values of .90 overall and .82-.83 in the three subscales. The vast majority of respondents reported that their husband or their parents were their main sources of support for infant care. Conclusion: This study demonstrates that the K-PICSS has satisfactory construct validity and reliability to measure infant care social support in Korea.

• Structural Engineering and Mechanics
• /
• v.17 no.2
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• Journal of Agricultural Extension & Community Development
• /
• v.22 no.4
• /
• pp.455-464
• /
• 2015

The purposes of this study are to explain and identify the frame of structural relations of learning orientation, self-efficacy, learning transfer and job performance of farmers who participated in the strong and small farms education. This is an experimental research with the data collected from 495 farmers who have taken the farm education. Based on the collected data, the study conducted a structural equation modeling(SEM) to confirm the validity and analyze the structural relations of the suggested model. Using measured and latent variables drew from the analyses, the study set a structural equation model and tested the model by analysis of the structural equation modeling with AMOS 18.0. The results found from the empirical analysis can be summarized as follows. 1) Learning orientation and self-efficacy positively influenced job performance through learning transfer. 2) The hypothesis that learning orientation would have direct impact on job performance was not supported. 3) The strong and small farms education is useful to expand learning transfer and to enhance job performance. So, government policy support has to reinforce learning support on farmers in order to achieve high performance of learning and job management through farm educations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.138-145
• /
• 2020

This study was conducted to identify the structural performance of the opening in a location close to the support point in the perforated beam system of steel beams. In addition, structural performance was determined through experiments on reinforced openings using vertical and horizontal steel plates. In the steel simple beam, it was found that the opening was in a position closer to the support point, half the height of the steel beam (D/2), which was more appropriate than the height of the steel beam (D). In addition, the reinforcement effect of horizontal steel plate was greater than that of vertical steel plate reinforcement. Structural performance was improved when there was no gap between openings and steel plates.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.124-131
• /
• 2010

Rock Bolt generally utilizes deformed reinforcing bar welded from structural steel of which strength is higher than required for making advantageous use of the support function of ground. In the condition with highly corrosive underground water, however, problem frequently occurs on tunnel and slope stabilization in terms of repair, rehabilitation and maintenance issues due to the destruction of Rock Bolt by corrosion of steel. A structural performance evaluation for GFRP Rock Bolt was conducted for the purpose of resolving the foregoing problem and at the same time developing a permanently-usable support material. This study intended to evaluate the safety factor of GFRP Rock Bolt by implementing the slope stability interpretation via structural analysis on the basis of its structural characteristics derived from both tensile force function test and shear force function test. It is judged based on the results that GFRP Rock Bolt would secure sufficient ground stability as an alternative material for existing Steel Rock Bolt.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.159-165
• /
• 2006

In this study, structural analysis is executed about cone structure of KSL V-1 2nd stage KMS(kick motor support structure) which is designed for support the load developed from 2nd stage kick motor. KMS is consisted of cone structure and truss structure which is designed for supporting load developed from 2nd stage payload. Applied loads to cone structure are tension load by inertia developed from kick motor and compression load developed from kick motor. Also, shear and bending load are developed according to flight condition. In this study, structural analysis of cone structure is executed under several load condition which may be applied to cone structure. Also, structural analysis with two finite element model is performed according to pressure vent scheme. In result of structural analysis, critical load condition is equivalent tension load with cut-out.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.10a
• /
• pp.197-204
• /
• 1997

The development of computer-integrated design systems that fully support structural design process needs the computerization of structural design at the preliminary design stage. The objective of this paper is to develop a prototype system for preliminary design of reinforced concrete structures. This study focuses on the development of a natural design process oriented GUI(Graphic User Interface) and a representation of an experienced knowledge. The prototype system has been currently implemented using the objected-oriented programming concepts, the program language(i.e.,Visual C++) and the expert shell(i.e., Intelligent Rules Element).