• 한국안전학회지
• /
• 제38권3호
• /
• pp.61-68
• /
• 2023

This study performed a structural performance evaluation of a system scaffolding for elevator installation work developed in previous studies. The structural performance was evaluated via a structural test conducted to apply the working load specified in the design standard. The deflection of the horizontal member and the stress of each member constituting the system scaffolding were measured. Consequently, the structural safety evaluation including structural behavior and required performance was performed using the deflection and stresses measured from the structural test. The structural test and safety evaluation results based on the heavy working load corresponding to the design load indicated that the deflection, which is the performance criterion of the horizontal member, did not exceed the allowable value. Further, each member's stress, which is a safety evaluation indicator, did not exceed the allowable strength for both horizontal and vertical members with bending behavior and fordable bracing with tensile behavior, while also satisfying the required safety factor. In addition, the results confirmed the safety against deformation, partial damage, and destruction owing to excessive and maximum load. Therefore, the system scaffolding developed in this study satisfies both the structural performance and safety required by the design standards; thus, it can be applied to elevator installation work sites.

• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.69-80
• /
• 2003

This study researched problems of safety inspection method and current legislative system for the structure safety evaluation of Rahmen structure affected by remodeling. The elements of weight increase were examined in terms of differences of load moment, shear force, compressive stress and amount of steel before and after remodeling by structure analysis. The thorough examination for impacts of weight increase is indispensable to change of use or extension.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.109-119
• /
• 2023

A structural safety evaluation was conducted for the stabbing system for the pre-piling jacket substructure currently being developed in South Korea, considering pile construction errors due to its lateral movement that may occur during construction in the ocean. Based on (1) the maximum stress generated by the stabbing system, (2) the maximum rotational displacement of the guide cone, and (3) the maximum stress generated by the horizontal hydraulic pressure cylinder, the structural safety of the stabbing system was examined under the initial loading condition and three possible load combinations during its construction. In order to evaluate the structural safety of the stabbing system, a concept of stress safety factor (= Yield stress / Max. Von-Mises stress) was used. It was found that the stabbing system considered in this study has a sufficient margin of safety.

• Structural Monitoring and Maintenance
• /
• 제5권1호
• /
• pp.129-150
• /
• 2018

This paper presents the structural performance monitoring of an urban footbridge located in Hangzhou, China. The structural health monitoring (SHM) system is designed and implemented for the footbridge to monitor the structural responses of the footbridge and to ensure the structural safety during the period of operation. The monitoring data of stress and displacement measured by the fiber Bragg grating (FBG)-based sensors installed at the critical locations are used to analyze and assess the operation performance of the footbridge. A linear regression method is applied to separate the temperature effect from the stress monitoring data measured by the FBG-based strain sensors. In addition, the static vertical displacement of the footbridge measured by the FBG-based hydrostatic level gauges are presented and compared with the dynamic displacement remotely measured by a machine vision-based measurement system. Based on the examination of the monitored stress and displacement data, the structural safety evaluation is executed in combination with the defined condition index.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.15-23
• /
• 2009

압축력에 강한 석조 홍예아치교의 경우 재료적 음력한계보다는 구조적 형상의 불안정성에 의해서 구조물이 붕괴된다. 이러한 특성을 고려하면, 석조 홍예아치교의 구조적 안정성 평가에는 구조물의 붕괴기구 형상에 초점을 둔 한계상태 해석이 보다 적합하다. 이 연구에서는 한계상태 해석법을 이용하여 건식법(dry construction)으로 축조된 우리나라 석조 홍예아치교의 구조적 거동을 살펴보고, 이 결과를 구조적 안정성 평가시스템 개발에 이용하고자 한다. 이 연구결과는 우리나라 석조 홍예아치교의 구조적 거동을 이해하는데 도움이 되며, 향후 문화재 유지관리 측면에서 공학적 판단기준을 주리라 기대한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.240-247
• /
• 1993

The precise prediction of reserved carrying capacity of bridge as a system is extremely difficult especially when the bridges are highly redundant and significantly deteriorated or damaged. This paper is intended to propose a new approach for the evaluation of reserved system carrying capacity of bridges in terms of equivalent system-strength, which may be defined as a bridge system-strength corresponding to the system reliability of the bridge. This can be derived from an inverse process based on the concept of FOSM form of system reliability index. It may be emphasized that this approach is very useful for the evaluation of the deterministic system redundancy and reserve strength which are measured in terms of either probabilistic system redundancy factor and reserve factor or deterministic system redundancy factor and reserve factor. The system reliability of bridges is formulated as a parallel-series model obtained from the FAM(Failure Mode Approach) based on the major failure mechanisms. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed approach and method for the system redundancy and reserve safety/strength are applied to the safety assessment of actual RC and steel box-girder bridges. The results of the evaluation of reserved system safety or bridge system-strength in terms of the system redundancy and the system safety/strength are significantly different from those of element reliability-based or conventional methods.

• 항공우주시스템공학회지
• /
• 제17권5호
• /
• pp.58-62
• /
• 2023

본 연구에서 항공기 엔진 내부 구성품의 구조 설계 결과에 대한 구조 안전성 평가 연구를 수행하였다. 엔진 내부 구성품에 라디에이터와 인터쿨러가 장착된다. 따라서 비행중에 라디에이터와 인터쿨러의 안전성을 검토하였다. 구조 해석을 통해 구조 안전성을 평가하였다. 구조 해석 기법은 유한 요소 해석 기법을 활용하였다. 구조 설계 및 해석을 위하여 가속도 하중을 고려하였다. 구조 안전성 평가 결과 구조 설계 결과는 타당한 것으로 확인되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.105-112
• /
• 1996

A practical approach for the assessment of system reliability-based safety and load carring capacity under vehicle traffics is proposed for the realistic evaluation of safety and rating of cable-stayed bridges. A partial event tree analysis model incorporating major critical failure paths is suggested as a practical tool for the system reliability analysis and system reliability-based capacity rating. The proposed approach for the system reliability analysis and system reliability-based rating is applied to the safety assessment of the Jindo Bridge which is one of two existing cable-stayed bridges in Korea. The results of analyses at the system level based on the system reliability are compared with those at the element level.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.324-328
• /
• 2019

스포츠를 위해 제공되고 사용되는 몇 가지 전용 챔버가 공급되어 사용되고 있지만 스포츠 멀티 환경을 동시에 제공할 수 있는 다기능 올인원 챔버는 개발되지 않았다. 본 연구에서는 스포츠 다중 인공 환경 시스템에 사용할 수 있는 다중압력 (양 / 대기 / 음압) 일체형 챔버를 설계하였다. 키가 큰 사용자를 위해 공간을 넓힌 새로운 챔버 디자인을 제시 한 다음 최대 응력과 구조적 안전성검토를 통하여 챔버의 구조해석을 수행하였다. 목표로 하는 허용 압력 조건하에서 쉘과 출입구의 접합부에서 최대 응력이 발생했으며, 챔버 재료의 허용응력을 기준으로 하여 구조안전성 평가를 수행하였다. 다중 압력 일체형 챔버에 대하여 구조해석을 수행한 결과 양압과 음압 조건에 대한 최대 응력이 챔버 재료의 허용응력 보다 훨씬 작은 값이 발생되었으며, 구조안전성 평가 결과 안전율 2 이상을 만족하여 챔버의 최종 시제품의 설계가 구조적으로 안전하다는 것을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.160-168
• /
• 2011

성수대교 삼풍백화점 붕괴사고 등을 계기로 유지관리 분야의 중요성이 대두되면서 1995년 시설물의안전관리에관한특별법이 제정되어 점검 진단이 실시되는 등 본격적인 유지관리체제가 시작됐다. 그러나 점검 진단의 역사가 일천한 관계로 점검 진단에 대한 기술수준이 낮았고 연구 성과 또한 미흡하여 부실 점검 진단에 대한 우려가 상존해 있었다. 이에 2002년 평가제도가 도입되면서 부실 점검 진단 비율이 지속적으로 낮아져 왔다. 그러나 최근 점검 진단 실시결과 평가실적에 따르면 향후 부실 점검 진단비율이 더 이상 낮아지기 힘든 경향을 보이고 있다. 이를 계기로 부실 점검 진단과 관련하여 관련기관의 설문조사와 메커니즘 측면에서 고찰하므로서, 부실 점검 진단이 초래되는 근원적인 문제점을 나열하였고, 이를 바탕으로 현행 평가제도의 개선방향을 제시 하고자 하였다.