• Title/Summary/Keyword: structural relationship

Search Result 4,513, Processing Time 0.032 seconds

High quality topological insulator Bi2Se3 grown on h-BN using molecular beam epitaxy

  • Park, Joon Young;Lee, Gil-Ho;Jo, Janghyun;Cheng, Austin K.;Yoon, Hosang;Watanabe, Kenji;Taniguchi, Takashi;Kim, Miyoung;Kim, Philip;Yi, Gyu-Chul
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.284-284
    • /
    • 2016
  • Topological insulator (TI) is a bulk-insulating material with topologically protected Dirac surface states in the band gap. In particular, $Bi_2Se_3$ attracted great attention as a model three-dimensional TI due to its simple electronic structure of the surface states in a relatively large band gap (~0.3 eV). However, experimental efforts using $Bi_2Se_3$ have been difficult due to the abundance of structural defects, which frequently results in the bulk conduction being dominant over the surface conduction in transport due to the bulk doping effects of the defect sites. One promising approach in avoiding this problem is to reduce the structural defects by heteroepitaxially grow $Bi_2Se_3$ on a substrate with a compatible lattice structure, while also preventing surface degradation by encapsulating the pristine interface between $Bi_2Se_3$ and the substrate in a clean growth environment. A particularly promising choice of substrate for the heteroepitaxial growth is hexagonal boron nitride (h-BN), which has the same two-dimensional (2D) van der Waals (vdW) layered structure and hexagonal lattice symmetry as $Bi_2Se_3$. Moreover, since h-BN is a dielectric insulator with a large bandgap energy of 5.97 eV and chemically inert surfaces, it is well suited as a substrate for high mobility electronic transport studies of vdW material systems. Here we report the heteroepitaxial growth and characterization of high quality topological insulator $Bi_2Se_3$ thin films prepared on h-BN layers. Especially, we used molecular beam epitaxy to achieve high quality TI thin films with extremely low defect concentrations and an ideal interface between the films and substrates. To optimize the morphology and microstructural quality of the films, a two-step growth was performed on h-BN layers transferred on transmission electron microscopy (TEM) compatible substrates. The resulting $Bi_2Se_3$ thin films were highly crystalline with atomically smooth terraces over a large area, and the $Bi_2Se_3$ and h-BN exhibited a clear heteroepitaxial relationship with an atomically abrupt and clean interface, as examined by high-resolution TEM. Magnetotransport characterizations revealed that this interface supports a high quality topological surface state devoid of bulk contribution, as evidenced by Hall, Shubnikov-de Haas, and weak anti-localization measurements. We believe that the experimental scheme demonstrated in this talk can serve as a promising method for the preparation of high quality TI thin films as well as many other heterostructures based on 2D vdW layered materials.

  • PDF

A Study of Pulmonary Function and HRCT Findings in Asthma Patients According to the Response after Treatment (기관지 천식 환자에서 치료 반응의 차이에 따른 폐 기능 및 고해상 CT 소견의 고찰)

  • NamKung, Eun-Kyung;Kim, Kyung-Ho;Kim, Ki-Up;Uh, Soo-Taek;Kim, Yong-Hoon;Park, Choon-Sik;Park, Jae-Sung
    • Tuberculosis and Respiratory Diseases
    • /
    • v.44 no.5
    • /
    • pp.1051-1062
    • /
    • 1997
  • Background : In asthma, airway obstruction is usually reversible, either spontaneously or with treatment. However, the responses to treatment are variable and some patients show an irreversible component of airflow obstruction. This may be associated with structural changes in the airway. To assess the relationship between the difference in airway reversibility and structural changes, we evaluated the HRCT findings and pulmonary function test. Methods : We studied 40 asthmatic subjects who had had acute exacerbation of symptoms and had showed normal chest X-ray findings. They had monitered PEFR daily, and had performed PFT and HRCT within three days after initiation of treatment. According to serial PEFR, they were grouped into 3 categories (Group 0 ; initial PEFR was within normal limit, Group 1 ; revealed increment of 30% in PEFR within 3 days after initiation of treatment, Group 2 ; revealed within 2 weeks) and then grouped again into 4 (Group 0, Group 3 ; reached to normal value of PEFR within 3 days after initiation of treatment, Group 4 ; within 2 weeks, Group 5 ; not within 2 weeks). Results : (1) Age in Group 0 was significantly lower than other groups(p<0.05), but there was no significance in other groups. (2) Duration of asthma in Group 2 was significantly longer than Group 0, 1(p<0.05). (3) FVC(%) and FEV1(%) were significantly decreased with delayed response to the treatment (p<0.05). (4) $FEV_1$/FVC(%) in Group 1, 2 were significantly lower than Group 0(p<0.05). $FEV_1$/FVC(%) in Group 5 was significantly lower than Group 0,3,4 (p<0.05). (5) Air trapping was increased significantly with delayed response to the treatment (p<0.05). (6) Mucus impaction in Group 0 was significantly larger than Group 1,2 (p<0.05). $FEV_1$/FVC(%) in Group 0,4,5 were significantly larger than Group 3 (p<0.05). Conclusion : Difference in reversibility of airway obstruction was associated with age, duration of asthma and severity of initial airflow obstruction There was no definite difference in HRCT findings in asthma.

  • PDF

Chromosome Analysis from Papillary Carcinoma and Nodular Hyperplasia of the Thyroid Gland (결절성 갑상선종과 유두성 갑상선암의 염색체 분석)

  • Hwhang Dae-Won;Chung Ki-Yong;Kang Joong-Shin;Kim Hong-Tae;Chang Sung-Ik
    • Korean Journal of Head & Neck Oncology
    • /
    • v.9 no.1
    • /
    • pp.25-32
    • /
    • 1993
  • The nodular hyperplasia of the thyroid is a common thyriod disease. Nodular hyperplasia does rarely progress to thyroid cancer. The differentiation of a nodular hyperplasia from a neoplasm may be simple or difficult, both clinically and anatomically. The papillary carcinoma of the thyroid is the most common type of thyroid malignancies. There were few studies about cytogenetic observation in thyroid cancer. But only one case of banding observation in nodular hyperplasia have been reported. In order to compare the chromosomal changes in the thyroid cancer and the noncancerous thyroid disease, we performed cytogenetic analysis in two papillary carcinoma and two nodular hyperplasia after cell culture. The chromosomal pattern of the nodular hyperplasia found was very heterogenous but no clonal abnormaly in both cases was observed. Case I : A modal chromosomal number was in 42-46 range. Chromosome 8, 19, 21. 22 were commonly lost. 9 structural anomalities among 51 analysed cells were observed but they were not clonal. Case II: A modal chromosomal number was 43. Chromosome 17 and 19 were commonly lossed. Common cytogenetic characters of this two nodular hyperplasia are hypodiploidity and very heterogenous chromosomal pattern. The result about the papillary carcinoma are as follow. In one case some numerical and structural chromosomal changes were observed. But they were not clonal abnormality. In another case the chromosomal pattern found was very heterogenous with a clonal abnormality of del(11)(q23). The modal number was 46. The del(11)(q23) a chromosomal change in papillary carcinoma of the thyroid have previously been reported(Eva Olah et al. 1989). We suggest that 11q deletion may be important role to pathogenesis of papillary carcinoma of the thyroid. According to this results, we could not find out specific differences about chromosomal changes and any relationship between the papillary carcinoma and the nodular hyperplasia.

  • PDF

Current Status of Korean Ginseng Research (한국인삼론(韓國人蔘論))

  • Han, Byung-Hoon
    • Korean Journal of Pharmacognosy
    • /
    • v.3 no.3
    • /
    • pp.151-160
    • /
    • 1972
  • Recent achievements of scientific research on the pharmacologic activities and the chemical problems of dammalene glycosides, which are considered to be effective principles of Korean ginseng, are reviewed and analyzed in view of structure-activity relationship. 1) S. Shibata and his co-workers detected 12 glycoside spots of dammalene series on the two dimensional T.L.C. of total glycoside fraction from Japanese ginseng, and designated them Ginsenoside Rx(x=a, b, c, g, h, etc.) in the order of increasing Rf-value. The aglycones of those glycosides were characterized to be protopanaxadiol for the Ginsenoside $Rx(x=a,\;b_{1},\;b_{2},\;c,\;d,\;e,\;f)$ and protopanaxatriol for the Ginsenoside $Rx(x=g_{1},\;g_{2},\;g_{3},\;h_{1}\;'h_{2})$. Using Korean ginseng as the material for our study, the author and his coworkers isolated a new dammalene glycoside(Panax Saponin C), which comes under the category of protopanaxadiol glycosides based on the classification of S. Shibata et al., and characterized this saponin to be the glycoside of protopanaxatriol series. Furthermore, Panax Saponin C dissociated into $two\;components(C_{1}\;and\;C_{2}-acetate)$ by acetylation, both of which returned to original Panax Saponin C by deacetylation. Based on this result, more than 13 glycoside components of dammalene series will be expected in the Korean ginseng. 2) The structures of protopanaxadiol and protopanaxatriol, the genuine aglycones of dammalene glycosides, are fully established to be structural analogues by S. Shibata and his co-workers, therefore antagonistic and/or analogical activities will be expected for the pharmacologic activities of these glycoside series of structural analogues. K. Takaki and his co-workers found central nervous system (CNS) stimmulant activity from the glycosides of protopanaxatriol series and CNS-depressant activity from the glycosides of protopanaxadiol series. On the other hand, the author and his co-workers found stimmulating activity on the protein synthesis from both the series of dammalene glycosides with delayed and long-lasting characteristics. This delayed and long-lasting characteristics were also observed in the anti-inflammatory activity of glycosides of protopanaxatriol series on their time course tendency. For the convenience's sake of argument, pluralistic pharmacologic activities of dammalene glycosides, which were observed by many workers at various pharmacologic site, may be classified into two main categories; one is pan-cellular activity and the other is organ specific activity to the certain tissue which is a mass of cells differentiated to a certain direction for their special functions in the body. Based on the data of K. Takaki and those of the authors, following assumption will be probable; Pharmacologic activities of both series of glycosides of protopanaxadiol and protopanaxatriol aglycones may be antagonistic on their tissue-specific activities and analogic on their pan-cellular activities. Therefore, the mixture of these two series of glycosides in an appropriate ratio, as the case of total extract of Korean ginseng, will be probably beneficial to the host by increasing the synthesis of some functional proteins, due to the additive action of pan-cellular activity, and with the disappearance of any significant behavioral symptoms due to the antagonism of tissue specific activity. This fact will probably be the main reason why classical trials of pharmacologists failed in re-discovering the efficacy of Korean ginseng with their behavioral test. 3) The author and his co-workers achieved the synthesis of $C^{14}-labelled\;Panax\;Saponin\;A\;on\;C_{25}-C_{27}\;position\;of\;aglycone$ in the interest of tracer studies in vivo. The method will be applicable to other dammalene glycosides regardless of their chemical structure. 4) The author and his co-workers converted chemically betulafolienetriol, a triterpene component of Betula platyphylla, to the protopanaxadiol, one of genuine aglycone of dammalene glycosides.

  • PDF

A Study on the Structural Characteristics and Estimation of Refrigerating. Load for the Fruit Storage (청과물저장고의 구조특성 및 냉각부하량 산정에 관한 연구)

  • 이석건;고재군
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.18 no.1
    • /
    • pp.4038-4051
    • /
    • 1976
  • This study was intended to provide the basic design creteria for the refrigerated storage, and to estimate the required optimum capacity of refrigerator for the different sizes and kinds of the existing fruit storage. The structural characteristics of the existing fruit storages in Pyungtaek-khun of Kyungki-do were surveyed. The average out-door air temperature during the expected storage life after harvesting, was obtained by analyzing the weather information. The heat transfer rates through the different models of storage walls were estimated. The refrigerating load required for different models of fruit storage was analyzed in the basis of out-door air temperature. The results obtained in this study are summarized as follows: 1. The fruit storages surveyed were constructed on-ground, under-ground and sub-ground type buildings. The majority of them being the on-ground buildings are mostly made of earth bricks with double walls. Rice hull was mostly used as the insulating materials for their walls and ceilings. About 42% of the buildings were with the horizontal ceiling, 22% with sloped ceiling, and about 36% without ceiling. About 60% of the storage buildings had floor without using insulated material. They were made of compacted earth. 2. There is no difference in heat transfer among six different types of double walls. The double wall, however, gives much less heat transfer than the single wall. Therefore, the double wall is recommended as the walls of the fruit storage on the point of heat transfer. Especially, in case of the single wall using concrete, the heat transfer is about five time of the double walls. It is evident that concrete is not proper wall material for the fruit storage without using special insulating material. 3. The heat transfer through the storage walls is in inverse proportion to the thickness of rice hull which is mostly used as the insulating material in the surveyed area. It is recommended that the thickness of rice hull used as the insulating material far storage wall is about 20cm in consideration of the decreasing rate of heat transfer and the available storage area. 4. The design refrigerating load for the on-ground storages having 20 pyung area is estimated in 4.07 to 4.16 ton refrigeration for double walls, and 5.23 to 6.97 ton refrigeration for single walls. During the long storage life, however, the average daily refrigerating load is ranged from 0.93 to 0.95 ton refrigeration for double walls, and from 1.15 to 1.47 ton refrigeration for single walls, respectively. 5. In case of single walls, 50.8 to 61.4 percent to total refrigerating load during the long storage life is caused by the heat transferred into the room space through walls, ceiling and floor. On the other hand, 39.1 to 40.7 percent is for the double walls. 6. The design and average daily refrigerating load increases in linear proportion to the size of storage area. As the size increases, the increasing rate of the refrigerating load is raised in proportion to the heat transfer rate of the wall. 7. The refrigerating load during the long storage life has close relationship to the out-door air temperature. The maximum refrigeration load is shown in later May, which is amounted to about 50 percent to the design refrigerating load. 8. It is noted that when the wall material having high heat transfer rate, such as the single wall made of concrete, is used, heating facilities are required for the period of later December to early February.

  • PDF

Geological Structures and Geochemical Uranium Anormal Zone Around the Shinbo Mine, Korea (신보광산 주변지역의 지질구조와 우라늄 지화학 이상대)

  • Kang, Ji-Hoon;Lee, Deok-Seon
    • Economic and Environmental Geology
    • /
    • v.45 no.1
    • /
    • pp.31-40
    • /
    • 2012
  • This paper examined the characteristics of ductile and brittle structural elements with detailed mapping by lithofacies classification to clarify the relationship between the geological structure and the geochemical high-grade uranium anormal zone and to provide the basic information on the flow of groundwater in the eastern area of Shinbo mine, Jinan-gun, Jeollabuk-do, Korea. It indicates that this area is mainly composed of Precambrian quartzite, metapelite, metapsammite, which show a zonal distribution of mainly ENE-WSW trend, and age unknown pegmatite and Cretaceous porphyry which intrude them. But the Cretaceous Jinan Group which unconformably covers them, contrary to assumption, could not be observed. The main ductile deformation structures of Precambrian metasedimentary rocks were formed at least through three phases of deformation [ENE striking regional foliation (D1) -> ENE or EW striking crenulation foliation (D2) -> WNW or EW trending open, tight, kink folds (D3)]. The predominant orientation of S1 regional foliation strikes ENE and dips south, being similar to the zonal distribution of Precambrian metasedimentary rocks. Most predominant orientation of high-angled brittle fracture (dip angle ${\geq}45^{\circ}$) [ENE (frequency: 24.3%) > NS (23.9%) > (N)NW (18.8%) > WNW (16.9%) > NE (16.1%) fracture sets in descending frequency order], which is closely related to the flow of groundwater, strikes ENE and dips south. It also agrees with the zonal distribution of metasedimentary rocks and the predominant orientation of S1 regional foliation. The next one strikes NS and dips east or west. Considering the controlling factor of the geochemical uranium anormal zone in the Shinbo mine and its eastern areas from the above structural data. the uranium source rock in these areas might be pegmatite and the geochemical uranium anormal zone in the Sinbo mine area could be formed by an secondary enrichment through the flow of pegmatite aquifer's groundwater into the Sinbo mine area like the previous research's result.

The Value of Entrepreneurial Orientation and Social Capital for Enhancing Collective Performance in R&D Collaborations of Korean Ventures (벤처기업의 R&D협력에서 사회적 자본과 기업가적 지향성이 협력성과에 미치는 영향)

  • Seo, Ribin
    • Journal of Korea Technology Innovation Society
    • /
    • v.20 no.1
    • /
    • pp.1-33
    • /
    • 2017
  • In the last decades, technology-oriented small firms, i.e. venture businesses, have been increasingly engaged in R&D collaborations with external parties as strategic means for technological innovation. Despite ample evidence on the benefit of such collaborations for the firms, there has been less attention to examining whether and how the firms' social interactions with cooperating partners and their managerial characteristics contribute to that benefit. Drawing on the theories of social capital and entrepreneurial orientation, this study is to remedy this gap. The theory of social capital, referring to a sum of the value and potential resources embedded in social relationships of collectives, provides an integrated view of social factors among cooperating partners, e.g. strong ties, network stability, trust, reciprocity, shared vision and value. It categorizes these factors into structural, relational, and cognitive dimensions of social capital. Entrepreneurial orientation theory captures firms' managerial characteristics as a combination of innovativeness, proactiveness, and risk-taking. This addresses firms' managerial process to utilize and combine internal and external resources for wealth creation and opportunity realization. Against this background, this study investigates what roles social capital among cooperating R&D partners and entrepreneurial orientation of the collaborating firms play for collective performance improvement in R&D collaborations. In terms of the collective performance, this study adopts two indicators: technological competitiveness and business performance. Technological competitiveness refers to the contribution of a technology developed by a cooperative R&D project to competitive advantage of a firm while business performance is defined as the financial and economic outcome of a collaboration. Using a sample of 218 Korean ventures engaging in R&D collaboration with external parties, the author finds the significant effects of social capital (i.e. structural, relational, and cognitive dimensions) and entrepreneurial orientation (i.e. innovativeness, proactiveness, and risk-taking) on both of the technological competitiveness and the business performance. Further, the higher the social capital among R&D partners, the more likely it is to foster the entrepreneurial orientation at firm-level. Most importantly, the entrepreneurial orientation at firm-level is an significant mediator of the relationship between social capital and collective performance. Beyond these novel empirical findings, this study contributes to the literature on R&D collaboration. The findings' implications for management and policy are deeply discussed in the conclusion.

A Scalable and Modular Approach to Understanding of Real-time Software: An Architecture-based Software Understanding(ARSU) and the Software Re/reverse-engineering Environment(SRE) (실시간 소프트웨어의 조절적${\cdot}$단위적 이해 방법 : ARSU(Architecture-based Software Understanding)와 SRE(Software Re/reverse-engineering Environment))

  • Lee, Moon-Kun
    • The Transactions of the Korea Information Processing Society
    • /
    • v.4 no.12
    • /
    • pp.3159-3174
    • /
    • 1997
  • This paper reports a research to develop a methodology and a tool for understanding of very large and complex real-time software. The methodology and the tool mostly developed by the author are called the Architecture-based Real-time Software Understanding (ARSU) and the Software Re/reverse-engineering Environment (SRE) respectively. Due to size and complexity, it is commonly very hard to understand the software during reengineering process. However the research facilitates scalable re/reverse-engineering of such real-time software based on the architecture of the software in three-dimensional perspectives: structural, functional, and behavioral views. Firstly, the structural view reveals the overall architecture, specification (outline), and the algorithm (detail) views of the software, based on hierarchically organized parent-chi1d relationship. The basic building block of the architecture is a software Unit (SWU), generated by user-defined criteria. The architecture facilitates navigation of the software in top-down or bottom-up way. It captures the specification and algorithm views at different levels of abstraction. It also shows the functional and the behavioral information at these levels. Secondly, the functional view includes graphs of data/control flow, input/output, definition/use, variable/reference, etc. Each feature of the view contains different kind of functionality of the software. Thirdly, the behavioral view includes state diagrams, interleaved event lists, etc. This view shows the dynamic properties or the software at runtime. Beside these views, there are a number of other documents: capabilities, interfaces, comments, code, etc. One of the most powerful characteristics of this approach is the capability of abstracting and exploding these dimensional information in the architecture through navigation. These capabilities establish the foundation for scalable and modular understanding of the software. This approach allows engineers to extract reusable components from the software during reengineering process.

  • PDF

Value of Geologic·Geomorphic Resources of Danyang-gun and Its Application from Geotourism Perspective (단양지역 지질·지형자원의 가치와 지오투어리즘 관점에서의 활용방안)

  • Jeong, Su-Ho;Gwon, Ohsang;Kim, Taehyung;Naik, Sambit Prasanajt;Lee, Jinhyun;Son, Hyorok;Kim, Young-Seog
    • Economic and Environmental Geology
    • /
    • v.53 no.1
    • /
    • pp.45-69
    • /
    • 2020
  • In Danyang area, various geological structures as well as various lithology and strata are well developed, which are useful for studying paleo-environment and structural movements, and also typical karst landforms, wethering landforms and river landforms. If geologically and geomorphologically valuable resources are used in terms of geotourim perspective, it is expected that revitalization of regional economy through diversification of attracting factors and employment creation of local people. Danyang has many excellent geological resources for geological field trip, they can greatly contribute to the development of geology such as expanding the base of geology and cultivating successive generations. In this study, we have evaluated newly discovered sites and previously excavated resources based on academical and educational values. By using these geological and geomorphological resources, we suggest three geotrail courses as follows. First, Geo-trail A is mainly focused on geological structures (Route A: Jeong Hwan Route), where we can learn geological deformation and movement through various brittle and ductile deformation structures. Second, Geo-trail B is mainly focused on stratigraphic importance (Route B: Soon-Bok Route), which emphasizes on various rocks, strata and contact relationship. Third, Geo-trail C is mainly focused on geomorphological landforms and landscapes (Route C: Satgat Route), which provide information about different geomorphological landforms and the interaction between different geological agents. In order to operate these geotrail courses efficiently, installation of explanation boards and view points, cultivate local commentators, and visitor centers and experience programs should be properly prepared together.

Difference in the Sense of Community in Open-Structure Central Squares in Apartment Complexes (공동주택 중앙광장의 개방 구조에 따른 지역 공동체의식의 차이)

  • Kang, Yon-Ju;Park, Jong-Wan;Im, Seung-Bin
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.37 no.3
    • /
    • pp.21-32
    • /
    • 2009
  • As an alternative for restoring a sense of community which has been broken up due to urban residence redevelopment, this study focuses on structural characteristics according to physical location of central squares in apartment complexes. Central squares do not simply function as inner-aiming and self-completed spaces for the residents, but their role can be expanded to a core location which encourages neighbors to communicate and interact with each other. The suppositions for this study are as follows. Structural characteristics according to the physical locations of the central squares in apartment complexes affect apartment residents' openness toward their neighbors and non-residents' accessibility to the square. At the same time, it influences the sense of community. In addition, psychological distance which is represented as psychological openness and accessibility forms a reciprocal relationship with the sense of community. For the study, we first categorized central squares as either open-structure or closed-structure based on how accessible it is from outside the apartment complex. According to these types of central squares, Sillim Prugio, Banghak Deasang Town Hyundai, Gwanak Prugio and Banghak Samsung Raemian 1 which have similar conditions and different structures were selected as sites of the study. Then each apartment complex was classified by apartment residents and non-residents so that eight groups were prepared for the survey. The results of the questionnaire survey especially regarding measuring the sense of community, psychological openness and accessibility indicated that the suppositions were right. Hence, the sense of community, psychological openness and accessibility are high in a central square with an open-structure while high standards of psychological openness and accessibility guarantee a positive sense of community. This study is meaningful in that it verifies that the physical location of central squares is reciprocally related to psychological openness, accessibility and a sense of community. At the same time, this study may serve as theoretical grounds for the planning and construction of practical central squares.