• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.11-28
• /
• 2022

This paper considers the combination of cyclic and axial loads to investigate the hysteretic performance of H-section 6061-T6 aluminum alloy members. The hysteretic performance of aluminum alloy members is the basis for the seismic performance of aluminum alloy structures. Despite the prevalence of aluminum alloy reticulated shells structures worldwide, research into the seismic performance of aluminum alloy structures remains inadequate. To address this deficiency, we design and conduct cyclic axial load testing of three H-section members based on a reliable testing system. The influence of slenderness ratios and bending direction on the failure form, bearing capacity, and stiffness degradation of each member are analyzed. The experiment results show that overall buckling dominates the failure mechanism of all test members before local buckling occurs. As the load increases after overall buckling, the plasticity of the member develops, finally leading to local buckling and fracture failure. The results illustrate that the plasticity development of the local buckling position is the main reason for the stiffness degradation and failure of the member. Additionally, with the increase of the slenderness ratio, the energy-dissipation capacity and stiffness of the member decrease significantly. Simultaneously, a finite element model based on the Chaboche hybrid strengthening model is established according to the experiment, and the rationality of the constitutive model and validity of the finite element simulation method are verified. The parameter analysis of twenty-four members with different sections, slenderness ratios, bending directions, and boundary conditions are also carried out. Results show that the section size and boundary condition of the member have a significant influence on stiffness degradation and energy dissipation capacity. Based on the above, the appropriate material constitutive relationship and analysis method of H-section aluminum alloy members under cyclic loading are determined, providing a reference for the seismic design of aluminum alloy structures.

• 대한토목학회논문집
• /
• 제32권4A호
• /
• pp.207-215
• /
• 2012

본 연구에서는 비대칭 연결재를 갖는 조립식 압축부재의 연결재 간격에 따른 좌굴 거동을 알아보기 위한 실 대형 실험을 실시하였다. 압축부재인 H-300 형강 10 m 부재 3개를 볼트 연결하여 총 길이 30 m가 되도록 2 m 간격으로 2열 배치한 후 연결재 간격이 4 m, 5 m, 6 m인 경우에 대하여 압축 실험을 실시하였다. 본 논문에서는 연결재 간격에 따른 실험 좌굴하중을 평가하고 이를 유한요소해석 좌굴하중 및 Timoshenko 식에 의한 좌굴하중과 비교 분석 하였으며, 연결재 간격의 증가에 따른 조립식 압축부재의 좌굴 거동으로 인한 종방향 변위, 횡방향 변위, 변형률 등을 분석하였다. 실험 결과 연결재 간격이 증가함에 따라 조립식 압축부재의 좌굴 하중은 비선형적으로 급격히 감소함을 알 수 있었다. 그리고 연결재 간격이 증가함에 따라 실험 좌굴 하중과 이론 좌굴 하중의 차이 및 실험 좌굴 하중과 유한요소해석 결과의 차이도 증가되는 것으로 나타났다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.396-403
• /
• 1999

This experimental study investigates the hysterestic behavior of traditional timber frames subjected to lateral loads. Prototype frames for this study were selected from one of typical national treasures for timber structures in Korea. For simplicity roof structures and braket systems were excluded from specimens and the joint behavior of beam-to-column system were presumed to have crucial effect on their global behavior. The experimental observation showed stiffness degradation and slip after experiencing initial yield and the first cycle at a new larger displacement due to inherent gaps in traditional timber connection and gradual indentation of interfaces, The cyclic behaviors of all specimens were similar to those os modern timber frames with bolt and nail connections. Additional structural members such as an upper beam and clay-filled wall increased the initial stiffness strength and energy dissipation. It is expected that collapse of Korean traditional timber frames under lateral load is mainly caused from P-$\Delta$ effects rather than local member failure.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.139-148
• /
• 2015

본 논문은 강섬유 대신 철근집합체를 사용하여 초고강도 섬유보강 콘크리트 부재의 최대하중 이후 연성거동을 유도하는 것을 목적으로 한다. 강섬유와 철근집합체의 조합을 가진 직사각형 콘크리트 보에 대한 휨거동 실험을 수행하였다. 강섬유의 혼입률은 0%, 0.7%, 1%, 1.5%, 2%이고, 연성거동을 유도하기 위한 종방향 철근 집합체의 철근비는 0.0036, 0.016, 0.028 그리고 0.036이다. 이러한 실험 요소의 조합으로 15개의 초고강도 콘크리트보가 제작되었다. 강섬유 뿐만 아니라 종방향의 철근 집합체도 초고강도 콘크리트보의 연성거동을 유도하는데 효과를 가지고 있다. 강섬유 혼입률 0.7%와 철근비 0.028인 철근집합체를 사용할 경우 가장 경제적인 조합임을 볼 수 있다. 하중과 처짐관계, 콘크리트 응력의 변화 및 균열양상 등이 좁은 간격을 가진 작은 직경의 종방향 철근 집합체의 유용성을 나타내고 있다.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.101-108
• /
• 2012

강바닥판 교량은 비교적 얇은 강판이 사용되며, 가로 세로리브 및 가로보 등의 구조부재가 용접에 의해 복잡한 형상으로 조립되므로 용접에 의한 변형과 결함이 발생할 가능성이 매우 높고, 용접연결부에서의 응력 상태가 매우 복잡하다. 또한 실제 강바닥판 교량에서의 피로균열은 주부재보다 2차부재와의 용접연결부에서 발생되고 있다. 그러나 강바닥판교량 설계시에는 대부분 주부재에 대한 응력 평가가 이루어지고 있으며, 피로균열이 발생하는 구조상세에 대한 상세 응력 평가 및 특성 분석은 거의 검토되고 있지 있다. 본 연구에서는 공용년수 29년된 개단면 세로리브를 가진 강바닥판을 대상으로 피로균열의 원인을 조사하고, 재하시험 및 실교통류 흐름하에서의 현장계측을 통하여 대상 교량의 피로안전성을 검토하였다. 또한 피로균열이 발생된 세로리브 및 다이아프램의 용접부를 대상으로 격자해석 및 상세해석 모델을 사용하여, 이들 구조상세에 대한 영향면해석을 이용하여 이동하중에 따른 거동 특성을 조사하고, 대상교량의 피로균열 발생 원인을 규명하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.17-18
• /
• 2009

본 연구에서는 균열이 안정화된 철근콘크리트 부재의 거동 특성과 수치해석을 이용하여 미끄럼 함수를 제안하고, 이로부터 부착응력-미끄럼 관계 모델을 정의하였다.

• 기술사
• /
• 제19권4호
• /
• pp.5-10
• /
• 1986

On SWS 41 Plates jointed by the F11T M 20 high strength bolts the study on stress behavior and safety degree until rupture in static tensile tests were performed. By these results, in case of no clamping force stress concentration was extremed for strain of about 10% higher ratio. Elastic strain occurred to change of test specimens depth by the load and plastic strain occurred to local minute sleep after elastic strain. compared shear stress with tension stress from the fracture load it was showned lower values than the maximum shear stress theory and stress strain energy theory.

• Structural Engineering and Mechanics
• /
• 제6권8호
• /
• pp.871-882
• /
• 1998

This paper presents a new design method of truss bridges using advanced analysis. In this approach, separate member capacity checks encompassed by the specification equations are not required because the stability of separate members and the structure as a whole can be treated rigorously for the determination of the maximum strength of the structures. The method is developed and refined by modifications to the conventional elastic-plastic hinge method. Verification studies are carried out by comparing with the plastic-zone solutions. The load-deflection behavior of the truss shows a good agreement between the plastic-zone analysis. A case study is provided for a truss bridge. Member sizes determined by the proposed method are compared with those determined by the conventional method. It is concluded that the proposed method is suitable for adoption in practice.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.129-144
• /
• 2013

Load-carrying capacity of combined members consisted of inner and sleeved tubes subjected to axial compression was investigated in this paper. Considering the initial bending of the inner tube and perfect elasto-plasticity material model, structural behavior of the sleeved member was analyzed by theoretic deduction, which could be divided into three states: the elastic inner tube contacts the outer sleeved tube, only the inner tube becomes plastic and both the inner and outer sleeved tubes become plastic. Curves between axial compressive loads and lateral displacements of the middle sections of the inner tubes were obtained. Then four sleeved members were analyzed through FEM, and the numerical results were consistent with the theoretic formulas. Finally, experiments of full-scale sleeved members were performed. The results obtained from the theoretical analysis were verified against experimental results. The compressive load-lateral displacement curves from the theoretical analysis and the tests are similar and well indicate the point when the inner tube contacts the sleeved tube. Load-carrying capacity of the inner tube can be improved due to the sleeved tube. This paper provides theoretical basis for application of the sleeved members in reinforcement engineering.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.104-110
• /
• 2012

It is a common practice to design basement walls acting as a one-way slab or plate with idealized boundary conditions, resulting in potentially inefficient design. The walls are often supported by buttress columns and side walls in the vertical direction, thereby acting as a two-way slab. In this study, structural behavior of single-story, three-span basement wall subjected to lateral soil pressure was investigated. Three dimensional finite element analyses were conducted to determine the force distribution on the wall. Based on the numerical studies, a regression analysis was carried out to determine the design values of moments in vertical and horizontal directions as well as shear forces on the wall and design charts are developed. The proposed design method with accompanying design charts would enable practicing engineers to estimate member forces on the wall for preliminary design purpose without resorting to finite element analysis. Numerical examples demonstrated the applicability of the proposed method.