• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.17-25
• /
• 2020

In this study, non-flammable mineral foam board using waste glass that can be produced to standardized specifications were developed and evaluated for the performance. In addition to the physical and mechanical performance, the environmental properties such as insulation, non-combustibility, gas hazard, sound absorption, etc. were tested to verify the use as interior and exterior building materials. Through the structural review, the validity was verified for the application of the office and restaurant building.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1151-1172
• /
• 2014

This paper presents a user programmable computational/control platform developed to conduct real-time hybrid simulation (RTHS). The architecture of this platform is based on the integration of a real-time controller and a field programmable gate array (FPGA).This not only enables the user to apply user-defined control laws to control the experimental substructures, but also provides ample computational resources to run the integration algorithm and analytical substructure state determination in real-time. In this platform the need for SCRAMNet as the communication device between real-time and servo-control workstations has been eliminated which was a critical component in several former RTHS platforms. The accuracy of the servo-hydraulic actuator displacement control, where the control tasks get executed on the FPGA was verified using single-degree-of-freedom (SDOF) and 2 degrees-of-freedom (2DOF) experimental substructures. Finally, the functionality of the proposed system as a robust and reliable RTHS platform for performance evaluation of structural systems was validated by conducting real-time hybrid simulation of a three story nonlinear structure with SDOF and 2DOF experimental substructures. Also, tracking indicators were employed to assess the accuracy of the results.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.617-626
• /
• 2019

In this study, we investigated the petrographic characteristics and physical property of the Rock-carved Seated Buddha at Bugmireugam hermitage of Daeheungsa temple in Haenam. The Buddha Statue was carved on micrographic granite, and the rock was composed of the fine quartz encircled by orthoclase. The results of diagnosis for deterioration evaluation have shown a highly damage rate of black contaminants (8.4%) and crack index (6.6). The ultrasonic velocity have detected SW (slightly weathered) grade of weathering coefficient (mean 0.18). Various weathering factor on the surface of the Buddha Statue was affected by precious shelter, and physical property with ultrasonic was directly influenced by the structural characteristics and fissure of host rock.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.4 s.247
• /
• pp.420-427
• /
• 2006

The structural and leakage integrity of steam generator tubes should be sustained against all postulated loads even if a crack is present. During the past three decades, most of the efforts with respect to integrity evaluation of steam generator tubes have been focused on limit load solutions but, recently, the applicability of elastic-plastic fracture mechanics was examined cautiously due to its effectiveness. The purpose of this paper is to introduce a testing method to estimate fracture resistance characteristics of steam generator tubes with a through-wall crack. Due to limited thickness and diameter, inevitably, the steam generator tubes themselves were tested instead of standard specimen or alternative ones. Also, a series of three dimensional elastic-plastic finite element analyses were carried out to derive closed-form estimation equations with respect to J-integral and crack extension for direct current potential drop method. Since the effectiveness of $J_{IC}$ as well as J-R curves was proven through comparison with those of standard specimens taken from pipes, it is believed that the proposed scheme can be utilized as an efficient tool for integrity evaluation of cracked steam generator tubes.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.509-514
• /
• 2007

Most of the IS continuance research has assumed that IS use is activated by an intention to use, which in turn is determined by the evaluation of IS usage. Perceived usefulness is one of the evaluation variables most widely used. Typically, the past studies adopt this perceived usefulness because it views continuance as an extension of acceptance behavior. However, the literature on interpersonal relationships suggests that individuals are motivated to maintain relationships either because they genuinely want to or they believe they have no other option. The former is referred to as dedication-based relationship maintenance and the latter as constraint-based relationship maintenance. The IS continuance can be considered as the relationship maintenance situation with the existing IS that the user is currently using. The belief constructs previously used in IS continuance researches fall into the category of dedication-based ones. Additional constraint-based belief constructs are needed to explain the IS continuance behavior. In this regard, switching cost represents an important avenue for better understanding and predicting customer retention in that it can be regarded as the constraint-based motivation for relationship maintenance or IS use continuance. For an empirical exploration, 275 samples were collected from the users of a web portal site. Data analysis using Structural Equation Modeling (SEM) shows that perceived usefulness shows a significant direct effect on continuance intention while perceived switching cost significantly affects continuance usage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.68-75
• /
• 2010

The one of the major problems in the development of PEMFC was regarding to the assurance of sealing on stack. The failure on the sealing creates the problems of fuel leakage, mixing, internal combustion, damage on parts and can be a direct reason for the degrading the efficiency of fuel cell. This paper studies on the analytical approach for improving the contacting pressure distribution on the gasket at the evaluation on the sealing of fuel cell stack. So, the assembly analysis on multi layered fuel cell stack was performed. The research on the simplification of finite element model was performed for three dimensional analysis at the multi layered state. The improved contact pressure distribution was obtained through the case studies on gasket for better sealing. In addition, the number of the cell was determined for the effective analysis and the structural characteristics were evaluated based on this research.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.291-296
• /
• 2007

This study presents the evaluation process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of 6x6 array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• Journal of Distribution Research
• /
• v.11 no.1
• /
• pp.21-40
• /
• 2006

The purpose of this paper is to investigate how evaluation of sales promotion is affected by consumer's perception on sale promotion tools(SP). Perception on SP is supposed to be classified into reduced loss and separate gain according to characteristics of SP, that are benefit realization period(immediate vs. remote), easy to calculate cash value(easy vs. difficult), and purchase occasion(concurrent vs. different). Hypothesis testing using ANOVA and structural equation model about data that is collected from college students based on experimental design, reveals that immediate realization and easy calculation make SP tool perceived as reduced loss. And perception as reduced loss is more effective to be evaluated as high value and lead to purchase intention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.2
• /
• pp.39-48
• /
• 2001

In recent years, the marine traffic congestion has increased due to the expansion of vessel traffic volume in Korean coastal waterway. Heavy traffic could bring serious marine casualties which cause the loss of human lives, properties and marine pollution in coastal area. The prevention of marine accidents has been a major topic in marin society and various policies and countermeasures have been developed, applied to the industries. VTS(Vessel Traffic Services) is considered as one of effective method to promote marine safety but it needs relatively huge amount of budgets to build and also number of personnels for the operation. Thus prior to establishing the VTS. It should be surveyed the marine traffics, general conditions of waterway including geographical, meteorological characteristics and assessed to find the most reasonable area and places for the system. Therefore this paper aims to develop the method for this evaluation through the hierarchical evaluation structure model in connection with ISM(interpretive structural modeling) and AHP(analytic hierarchy process) methods. The model in this paper is applied to 4 coastal area in Korean waterway as candidates and found that the priority for the needs of VTS should be in order such as Yosu, Wando, Mokpo, Geoje coastal area.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.96-102
• /
• 2005

Acoustic Emission(AE) technique has been applied to not only material characterization evaluation but also on-line monitoring of the structural integrity. The AE source location technique is very important to identify the source, such as crack, leak detection. Since the AE waveforms obtained from sensors are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analysis of the transient wave-form. In this study, we have divided the region of interest into a set finite elements, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. A new technique for the source location of acoustic emission in fiberboard plates has been studied by introducing Wavelet Transform(WT) do-noising technique. WT is a powerful tool for processing transient signals with temporally varying spectra. If the WT de-noising was employed, we could successfully filter out the errors of source location in fiberboard plates by arrival time difference method. The accuracy of source location appeared to be significantly improved.