• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.24-30
• /
• 2013

To guarantee the exact control of missile warhead, it is inevitable to ensure the stabilities in the view points of structural and fluid/thermo dynamics of the rocket motor. Specially, despite of shortness in operating time of the rocket motor which is initial turning type of missile, it occurs frequently some problems of ablation at the neighborhood of the nozzle throat, with the result that the system itself gets to failure. In these connections, in the present study, the effect of the operating time of a rocket motor on the coefficient of convective heat transfer at the nozzle wall is investigated by numerical analysis. As a result, it is turned out that the heat transfer coefficient is largest at the just ahead of nozzle throat and decreases with the increase of operating time of the rocket motor. Furthermore, we found that the radius of curvature of throat becomes smaller, the maximum coefficient of convective heat transfer becomes larger.

• Structural Engineering and Mechanics
• /
• v.86 no.4
• /
• pp.473-486
• /
• 2023

Nowadays, urban centers are increasingly vertical, making architects and engineers look for more efficient tools to analyze the effects of wind on tall buildings. Topology optimization can be used as an efficient tool for the design of bracing systems. Therefore, this work obtained the wind loads that act in the CAARC building, following the Brazilian standard NBR 6123/1988 and using Computational Fluid Dynamics. Four loading situations were considered, using the SIMP and BESO methods to optimize two-dimensional structures. A comparison between the SIMP and BESO methods is presented, showing the differences in the geometry of the solution found by both methods, the percentage variation in the objective function values and the dimensionless processing time. The solutions obtained through the loads obtained by the Brazilian standard are also compared with the numerical solutions obtained by CFD. The results show that the BESO method presented more rigid structures compared to the SIMP method. The bracing structures obtained with the SIMP method always present similar patterns in the distribution and quantity of bars, in contrast to the BESO method where no characteristic topology pattern was observed. It was concluded that even though the structures obtained by the BESO method presented greater stiffness, the SIMP method was less susceptible to the methodology used for the determination of wind loads. Additionally, it was evident the great potential that the combination topology optimization and computational wind engineering have in the design of bracing systems of high functional and aesthetic standards.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.213-219
• /
• 2022

Building Ukraine as an independent, sovereign state requires the education of a citizen-patriot, able to live and work in a democracy, ensure the unity of Ukraine, feel constant responsibility for themselves, their people, country, seek to make a real contribution to the reform process. Modern modernization of the education system requires the search for new information and communication technologies that can ensure the formation of a citizen with an active civic position, which involves not only students mastering the rights and responsibilities of citizens, convincing them of the feasibility of democratic transformation of society, patriotic qualities and feelings, but also the identification of motivated civic actions. The pandemic and hostilities have led to significant changes in the field of education around the world, they have caused educational problems in Ukraine. At the beginning of the quarantine in the spring of 2020, all educational institutions in the emergency mode switched to distance learning. Intensive use of information and communication technologies in the life of modern society has led to a rethinking of the content of education and training of future professionals: the main role is played not so much by the information itself as the ability to work with it, critically comprehend and produce new knowledge; the main thing is not the amount of information, but its quality; information is needed for further practical application and transformation into knowledge, and the ability to work with information becomes one of the important competencies of the modern specialist in the new transformation of society: from information to the knowledge society. In this context, one of the main forms of training is distance learning, which is able to respond to the challenges of society. The main methodological positions that are taken into account in the construction of the structure and dynamics of the formation of civic responsibility of the individual during the use of information and communication technologies are highlighted. The structure of civil responsibility as a holistic system of information and communication technologies is outlined, which includes three subsystems that characterize the natural, social and systemic qualities of citizenship, interconnected hierarchically and synergistically.The constituent elements of the structural part of the model of civic culture of the individual are analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2020

The wind turbine blades should be designed to possess a high stiffness and should be fabricated with a light and high strength material because they serve under extreme combination of lift and drag forces, converting kinetic energy of wind into shaft work. The goal of this study is to understand the basic knowledge required to curtail the process time consumed during the construction of small wind turbine blades using carbon fiber reinforced polymer (CFRP) prepeg composites. The configuration of turbine rotor was determined using the QBlade freeware program. The fluid dynamics module simulated the loads exerted by the wind of a specific speed, and the stress analysis module predicted the distributions of equivalent von Mises stress for representing the blade structures. It was suggested to modify the shape of test specimen from ASTM D638 to decrease the variance in measured tensile strengths. Then, a series of experiments were performed to confirm that the bladder compression molded CFRP prepreg can provide sufficient strength to small wind turbine blades and decrease the cure time simultaneously.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.165-175
• /
• 2018

The purpose of this study is to provide the basic data such as distribution status, growth characteristics, and the structural characteristics of forest stands for the systematic conservation and management of relict forest trees (stem girth of 300cm or larger) established naturally in Gangwon Province, Korea. The survey showed that 434 individuals of 19 species (conifers: 228 individuals of 4 species, broad-leaved trees: 206 individuals of 15 species) were distributed in Gangwon Province, and Taxus cuspidata was the most abundant among them with 203 individuals or about 46.7 % of the total. The stem girth was average of 404cm (conifers: 373cm, broad-leaves: 421cm), and Tilia amurensis with multi-stemmed growing on Sorak mountain range had the largest stem girth at 1,113cm. The average height and the crown width of relict forest trees were 15.4m and 10.0m, respectively. Although the environments of relict forest trees showed a slight difference by species, the relative appearance frequencies of most trees were high in the environments where the altitude was higher than 1,000 m, slope degree was greater than $25^{\circ}$, the slope faced north, and microtopography was at the upper of slopes. Regarding the stand characteristics of relict forest trees per unit area ($/100m^2$), the average total coverage was 294% (max. 475%), the total average number of species was 36 species (max. 60 species), the average species diversity index (H') was 2.560 (max. 3.593), the average canopy closure was 84.8% (max. 94.6%), and the average basal area (/ha) was $52.7m^2$ (max. $116.4m^2$, relict trees $30.0m^2$, and other trees $22.7m^2$). The analysis of the dynamics of the forest stands where relict forest trees were growing showed four types of the maintenance mechanisms of relict forest trees depending on the supply pattern of succeeding trees: "Low-density but persistent type (Quercus mongolica, Abies holophylla, Tilia amurensis, and Pyrus ussuriensis)," "Long ago stopped type (Pinus densiflora)," "Recently stopped type (Abies nephrolepis, Quercus variabilis, and Betula schmidtii)," and "Periodically repeated types of supply and stop (Salix caprea and Quercus serrata).".

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.85-93
• /
• 2019

Computational Science and Engineering is a convergence study that understands and solves complex problems such as science, engineering, and social phenomena through modeling using computing resources. Computational science and engineering combines algorithms, computational and informatics, and infrastructure. The importance of computational science is increasing with the improvement of computer performance and the development of large data processing technology. In Korea, Korea Institute of Science and Technology Information (KISTI) has been developing national computational science engineering software and utilization technology by combining basic science and computing technology through EDISON project. The EDISON project builds an open EDISON platform and integrates and services information systems in seven areas of computational science and engineering (computational thermal fluids, nanophysics, computational chemistry, structural dynamics, computational design, and computational medicine). Using this, we have established a web-based curriculum to lay the groundwork for fostering scientific talent and commercializing computational science and engineering software. The purpose of this study is to derive the quality characteristic factors of computational science platform and to empirically examine the effect on user satisfaction. This paper examines how the quality characteristics of information systems, the computational science engineering platform, affect the user satisfaction by modifying the research questions according to the propensity of the computational science platform by referring to the success factors of DeLone and McLean's information system. Based on the results of this study, we will suggest strategic implications for platform improvement by searching the priority of quality characteristics of computational science platform.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.181-191
• /
• 2024

Ports play a crucial role in the complex global supply chain. While many researchers have used social network analysis (SNA) to study active networks, there is a lack of SNA cohesion analysis specifically related to logistics and trade. Therefore, this study aims to identify time-series structural changes in all domestic import and export logistics networks, including regions, ports, and airports, by utilizing techniques such as k-core and community analysis. To carry out this analysis, we rely on data from the Korea Customs Service's Import and Export Logistics Statistical Yearbook spanning from 2004 to 2022. The findings from the k-core and community analysis indicate that the cohesion of the domestic import and export logistics network has continuously strengthened over time. Moreover, it reveals that regions, ports, and airports are becoming more cohesive and homogeneous, with Busan Port emerging as the central hub of a large community. These insights are expected to enhance our understanding of global logistics dynamics and contribute to the development of policies and sustainable import and export logistics processes.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.134-153
• /
• 2015

When making urban planning, it is important to understand climate effect caused by urban structural changes. Seoul city applies UPIS(Urban Plan Information System) which provides information on urban planning scenario. Technology for analyzing climate effect resulted from urban planning needs to developed by linking urban planning scenario provided by UPIS and climate analysis model, CAS(Climate Analysis Seoul). CAS develops for analyzing urban climate conditions to provide realistic information considering local air temperature and wind flows. Quantitative analyses conducted by CAS for the production, transportation, and stagnation of cold air, wind flow and thermal conditions by incorporating GIS analysis on land cover and elevation and meteorological analysis from MetPhoMod(Meteorology and atmospheric Photochemistry Meso-scale model). In order to reflect land cover and elevation of the latest information, CAS used to highly accurate raster data (1m) sourced from LiDAR survey and KOMPSAT-2(KOrea Multi-Purpose SATellite) satellite image(4m). For more realistic representation of land surface characteristic, DSM(Digital Surface Model) and DTM(Digital Terrain Model) data used as an input data for CFD(Computational Fluid Dynamics) model. Eight inflow directions considered to investigate the change of flow pattern, wind speed according to reconstruction and change of thermal environment by connecting green area formation. Also, MetPhoMod in CAS data used to consider realistic weather condition. The result show that wind corridors change due to reconstruction. As a whole surface temperature around target area decreases due to connecting green area formation. CFD model coupled with CAS is possible to evaluate the wind corridor and heat environment before/after reconstruction and connecting green area formation. In This study, analysis of climate impact before and after created the green area, which is part of 'Connecting green network across the north and south in Seoul' plan, one of the '2020 Seoul master plan'.

• Korean Journal of Cognitive Science
• /
• v.25 no.4
• /
• pp.343-384
• /
• 2014

In order to unravel the problems of the mind, today's cognitive science has expanded its perspective from the narrow framework of the past computer model or neuronal network model to the wider frameworks of interaction with the brain in interaction with the body in interaction with their environments. The theories of 'the extended mind', 'embodied mind', or 'enactive mind' appeared through such processes are working on a way to move into the environments while the problem to unravel the complex process of interactions between the mind, the body and the environments are left alone. This problem can be traced back as far as to Gibson and Maturana & Varela who tried at first to unravel the problem of the mind in terms of interaction between the brain, the body and there environments in 1960~70s. It's because Gibson stressed the importance of the 'affordance' provided by the environment while Maturana & Varela emphasized the 'autonomy' of auto-poiesis of life. However, it will be proper to say that there are invariants in the affordances provided by the environment as well as the autonomy of life in the state of structural coupling of the environment's variants and life's openness toward the environment. In this case, the confrontational points between Gibson and Maturana & Varela will be resolved. In this article, I propose Benjamin's theory of mimesis as a mediator of both theories. Because Benjamin's concept of mimesis has the process of making a constellation of the embodiment of the affordance and the enaction of new affordance into the environment at the same time, Gibson's concept of the affordance and Maturana & Varela's concept of embodiment and enaction will be so smoothly interconnected to circulate through the medium of Benjamin's concept of mimesis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.361-366
• /
• 2017

As the recent development of computing architecture and application software technology, real world simulation, which is the ultimate destination of computer simulation, is emerging as a practical issue in several research sectors. In this paper, metal plate motion in a square shock tube for small time interval was calculated using a supercomputing-based fluid-structure-combustion multi-physics simulation tool called Illinois Rocstar, developed in a US national R amp; D program at the University of Illinois. Afterwards, the simulation results were compared with those from experiments. The coupled solvers for unsteady compressible fluid dynamics and for structural analysis were based on the finite volume structured grid system and the large deformation linear elastic model, respectively. In addition, a strong correlation between calculation and experiment was shown, probably because of the predictor-corrector time-integration scheme framework. In the future, additional validation studies and code improvements for higher accuracy will be conducted to obtain a reliable open-source software research tool.