• Structural Engineering and Mechanics
• /
• 제6권7호
• /
• pp.757-772
• /
• 1998

The objective of the present work is to estimate the strength and failure characteristics of symmetric thin square laminates under negative shear load. Two progressive failure analyses, one using the Hashin criterion and the other using a Tensor polynomial criterion, are used in conjunction with the finite element method. First-order shear-deformation theory along with geometric nonlinearity in the von Karman sense has been incorporated in the finite element modeling. Failure loads, associated maximum transverse displacements, locations and modes of failure including the onset of delamination are discussed in detail; these are found to be quite different from those for the positive sheer load reported in Part I of this study (Singh et al. 1998).

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.147-157
• /
• 1999

An analytical methodology for solving antiplane problem of anisotropic materials is proposed and discussed in detail in this study. The material considered in this study possesses a symmetry plane at z=0. The relationship between the problems of anisotropic materials and the corresponding isotropic problems are established by Ma (1996) on the basis of the general solutions for the shear stresses and displacement in both the polar and Cartesian coordinate systems. This implies that any solution of an anisotropic problem can be obtained by solving a corresponding isotropic problem. In this study some examples and numerical results are presented as an explanation of how the complicated anisotropic problem could be solved by the associated simpler isotropic problem.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.347-352
• /
• 2002

Recent trends in the construction of building frame feature the increase use of composite steel concrete members functioning together in what terms of mixed structural systems. One of such systems, RCS(reinforced concrete column and steel beam) system is introduced and closely examined focusing on bearing strength of the composite joint in this paper. The main objective of this study was to develope one of details to increase bearing capacity while bearing failure is one of the two primary modes of failure in RCS system. Local bearing tests with specimens about 1/3 of the actual concrete column size were performed applying uniform load through steel plate with 100$\times$110mm size. Test results show that specimens with the bearing reinforcement detail developed in this study enhanced the bearing strength by 1.71~3.02 compared to concrete cylinder strength.

• International Journal of Control, Automation, and Systems
• /
• 제4권2호
• /
• pp.227-235
• /
• 2006

For a sophisticated humanoid that explores and learns its environment and interacts with humans, anthropomorphic physical behavior is much desired. The human vision system orients each eye with three-degree-of-freedom (3-DOF) in the directions of horizontal, vertical and torsional axes. Thus, in order to accurately replicate human vision system, it is imperative to have a simulator with 3-DOF end-effector. We present a 3-DOF anthropomorphic oculomotor system that reproduces realistic human eye movements for human-sized humanoid applications. The parallel link architecture of the oculomotor system is sized and designed to match the performance capabilities of the human vision. In this paper, a biologically-inspired mechanical design and the structural kinematics of the prototype are described in detail. The motility of the prototype in each axis of rotation was replicated through computer simulation, while performance tests comparable to human eye movements were recorded.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2006-2010
• /
• 2013

Leukocyte common antigen-related phosphatase (LAR) has been considered a promising target for the development of therapeutics for neurological diseases. Here, we report the first example for a successful application of the structure-based virtual screening to identify the novel small-molecule LAR inhibitors. Five of these inhibitors revealed micromolar inhibitory activities with the associated $IC_{50}$ values ranging from 2 to 6 ${\mu}M$. Because the newly identified inhibitors were also screened for having desirable physicochemical properties as a drug candidate, they may serve as a starting point of the structure-activity relationship study to optimize the medical efficacy. Structural features relevant to the stabilization of the new inhibitors in the active site of LAR are discussed in detail.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.661-679
• /
• 2015

In this article, nonlinear finite element solutions of bending responses of functionally graded spherical panels are presented. The material properties of functionally graded material are graded in thickness direction according to a power-law distribution of volume fractions. A general nonlinear mathematical shallow shell model has been developed based on higher order shear deformation theory by taking the geometric nonlinearity in Green-Lagrange sense. The model is discretised using finite element steps and the governing equations are obtained through variational principle. The nonlinear responses are evaluated through a direct iterative method. The model is validated by comparing the responses with the available published literatures. The efficacy of present model has also been established by demonstrating a simulation based nonlinear model developed in ANSYS environment. The effects of power-law indices, support conditions and different geometrical parameters on bending behaviour of functionally graded shells are obtained and discussed in detail.

• World Technopolis Review
• /
• 제5권2호
• /
• pp.119-130
• /
• 2016

This paper discusses Dortmund's municipal economic development policy, in particular during the period 2000-2010 in the context of the "Dortmund-project", a strategic concept designed at the end of the last millennium. Its core elements and key projects are presented in the following. We draw much attention to the interplay of cluster policy and urban development. In an earlier paper, Becker and Hermann (2013) had discussed some of other important milestones reached in the context of structural change in Dortmund, with a particular focus on the development of the TechnologieZentrum (=Technology Center) and the TechnologiePark (=Technology Park) Dortmund from its beginning in 1984. The "dortmund-project" was not addressed in detail. This present article and their paper are complementing one another.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.230-238
• /
• 2018

Superparamagnetic iron oxide nanoparticles (SPIONs) have been prepared without using surfactants to assess their stability at different time intervals. The synthesized particles were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, ultraviolet-visible-near infrared spectroscopy, and energy dispersive spectroscopy. Field emission scanning electron microscopy and high-resolution transmission electron microscopy images of the samples were also investigated. The average particle size was measured to be 12.7 nm even in the polydispersed form. The magnetic and dielectric characteristics of the $Fe_3O_4$ nanoparticles have also been studied and discussed in detail.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.365-370
• /
• 2001

The repairing technique of surface wrapping concrete structural members using fiber composite sheet have been widely used. The research efforts have been limited to studying relative strength increase of repaired concrete structures rather than ductility improvement based on composite material effect and the interface effect between composite and concrete. The compression tests of CFS(carbon fiber sheet) reinforced concrete specimens with various cross-sectional shapes and laminate angles have been peformed. FEM algorithm considering various parameters will be performed based on the obtained data. The results will be discussed in detail.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.235-239
• /
• 2005

In this research, we investigated the frequency characteristic of low-velocity impact induced damage signals on graphite/epoxy composite laminates using high-speed fiber Bragg grating(FBG) sensor system. Appling the FBG sensors to damage assessment, we need to study the response of FBG sensors as the damage signals of the different incident angles because FBG shows different directional sensitivity. In order to discriminate an impact induced damage signal from that of undamaged case, drop impacts with different energies were applied to the composite panel with different incident angle to the FBG sensor. Finally, detected impact signals were compared using frequency distributions of wavelet detail components in order to find distinctive signal characteristics of composites delamination.