• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.1-6
• /
• 2002

A numerical heat transfer analysis and the structural analysis were performed for the design of sub-scale combustion chamber's coolant passage. The heat flux through the combustion chamber wall was estimated by 2-D heat transfer analysis of compressible hot gas and the result was applied as a thermal boundary condition of 3-D analysis. The heat flux estimated by the present method agreed well with the experimental correlation and proved to be insensitive to cooling condition. So the same thermal boundary condition was applied for various operating conditions. The maximum temperature of combustion chamber wall was predicted by 3-D analysis for single coolant passage and the result will be used for the development of a regeneratively cooled combustion chamber. Also estimated were the stress distribution and structural safety of coolant passage through the static structural analysis.

• Computational Structural Engineering
• /
• v.4 no.4
• /
• pp.125-133
• /
• 1991

For the purpose of efficiently calculating the design sensitivity and the reliability for the complicated structures in which the structural responses or limit state functions are given by implicit form, the probabilistic finite element method is introduced to formulate the deterministic design sensitivity analysis method and incorporated with the second moment reliability methods such as MVFOSM, AFOSM and SORM. Also, the probabilistic design sensitivity analysis method needed in the reliability-based design is proposed. As numerical examples, two thin plates are analyzed for the cases of plane stress and plate bending. The initial yielding is defined as failure criterion, and applied loads, yield stress, plate thickness, Young's modulus and Poisson's ratio are treated as random variables. It is found that the response variances and the failure probabilities calculated by the proposed PFEM-based reliability method show good agreement with those by Monte Carlo simulation. The probabilistic design sensitivity evaluates explicitly the contribution of each random variable to probability of failure. Further, the design change can be evaluated without any difficulty, and their effect on reliability can be estimated quickly with high accuracy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.497-504
• /
• 2012

Finite element analysis is to approximate a geometry model developed in computer-aided design(CAD) to a finite element model, thus the conventional shape design sensitivity analysis and optimization using the finite element method have some difficulties in the parameterization of geometry. However, isogeometric analysis is to build a geometry model and directly use the functions describing the geometry in analysis. Therefore, the geometric properties can be embedded in the NURBS basis functions and control points so that it has potential capability to overcome the aforementioned difficulties. In this study, the isogeometric structural analysis and shape design sensitivity analysis in the generalized curvilinear coordinate(GCC) systems are discussed for the curved geometry. Representing the higher order geometric information, such as normal, tangent and curvature, yields the isogeometric approach to be the best way for generating exact GCC systems from a given CAD geometry. The developed GCC isogeometric structural analysis and shape design sensitivity analysis are verified to show better accuracy and faster convergency by comparing with the results obtained from the conventional isogeometric method.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.52-58
• /
• 2004

A Semi-Autonomous Underwater Vehicle (SAUV), capable of simple work on the seabed, is under development in KRISO-KORDI. This SAUV pressure vessel is composed of fiberglass reinforced plastic (FRP), and is also manufactured to carry electronic equipment. The objective of this paper is to describe the safety check for the pressure vessel. This is achieved fly conducting structural analysis and testing in a pressure tank. Strain and stress test results, under unit load, are obtained fly using ANSYS in linear structural analysis. Local buckling analysis are performed with NASTRAN at the middle oj the cylindrical hull. The first test, using linear structural analysis, is unsuccessful, as buckling occurred. During the second test, linear structural analysis, combined with local buckling analysis, is conducted. There is no buckling up to 250 m when both ANSYS and NASTRAN are used.

• Journal of Korea Foundry Society
• /
• v.30 no.5
• /
• pp.196-200
• /
• 2010

The structural stress and fatigue behavior of tensile specimen containing internal shrinkage defect were modeled. Real shrinkage defect in casting was scanned by industrial CT (computed tomography), and subsequently its shape was simplified by ellipsoidal primitives for the structural analysis (S.S.M., shape simplification method). The analysis results were compared with the results by real shrinkage shape without any simplification process. It was possible to consider real shrinkage of casting in stress analysis and the method to predict fatigue life of casting with defect was proposed.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.159-162
• /
• 2008

High pressure is involved during injection molding operation specially packing phase. Cracks in the mold are often occurred by high cavity pressure. In this study, structural analysis of mold has been performed using commercial softwares, Abaqus and Ansys, to investigate cause of crack in the injection mold. Structural analysis contains four cases: stress distribution according to the cavity pressure, stress concentration according to the boundary conditions, stress concentration for inter-locking design of mold, and stress concentration for distributed cavity pressure. Through this study it was observed that the locations of stress concentrations were coincident with locations of crack. Robust mold design is being required to withstand high cavity pressure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.169-176
• /
• 2003

In the present study, a shape design optimization scheme in shell structures is implemented based on the integrated framework of geometric modeling and analysis. The common representation of B-spline surface patch is used for geometric modeling. A geometrically-exact shell finite element is implemented. Control points or the surface are employed as design variables. In the computation of shape sensitivity, semi-analytical method is employed. Sequential linear programming is applied to the shape optimization of surfaces. The developed integrated framework should serve as a powerful tool to design and analysis of surfaces.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.71-77
• /
• 2018

This paper suggests how to improve the fatigue strength of an axle shaft, which is the vulnerable part of an axle shaft system for a 3.5-ton commercial vehicle. The axle shaft is composed of a universal joint with a spider and yoke, yoke shaft, and so on. Structural analysis of the initial axle shaft was conducted to select the exact area for structural strength fatigue improvement, and as a result, the inner/outer yoke shaft and spider were selected. Four cases considered design variables, such as length and thickness, to verify the enhanced durability of the axle shaft, and fatigue analysis was conducted. Finally, we suggest that the axle shaft system satisfied the working conditions for a 3.5-ton commercial vehicle.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.117-125
• /
• 2018

The primary objectives of this study are to develop a detail design of automated PHC pile head cutting machine and structural stability analysis of detail design that improves the conventional head cutting work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review and field study, 2)expert survey and interview, 3)selection of core technology using AHP analysis, 4)deduction of detail design 5) verification of structural stability. As an outcome, it is analyzed that gripper and gripper bearing shaft are structurally stable. Their maximum stresses are shown as 15.93%, 10.58% compared to their yield strength respectively. The results of detail design and structural stability analysis in this study will be utilized for the actual development of the automated PHC pile cutting machine prototype.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.219-222
• /
• 2006

Architecture is builded on the ground and affected environment which include shape of topography and situation. What this study saying is the analysis about the relation between the concept of structural geomorphology and the space modern architecture. As there are many issue about boundary of space and organic architecture, It is important what study about structural geomorphology In paper, we will aware that there are many similarities between architecture and topography. Notion of folded structure in structural geomorphology is connected with continuity or infinity. This is one of many example.