• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.211-218
• /
• 2018

Instant face lifting cosmetics contain various film forming agents for stretching the wrinkles on the skin surface. But, most of the film-forming polymers have sticky feels. And they are easily scrubbed out when skin is rubbed on. In this study, we focused on the influence of sodium silicate that has rapid film forming effect on skin surface and immediate wrinkle reducing effect. Sodium silicate, also known as water glass or soluble glass, is a compound containing sodium oxide and silica. Sodium silicate is a white powder that is readily soluble in water, producing an alkaline solution. Sodium silicate is stable in neutral and alkaline solutions. The sodium silicate solution hardens by drying in air and rapidly forms a thin film. When the solution is applied to the skin, the fine membrane coating is formed by water evaporation and ionic bond re-formation. It also makes the strong siloxane (Si-O) bonding on the skin surface. When these fixation properties are applied to cosmetics, they can give remarkable skin tightening effect. The sodium silicate solution can provide the lifting effect by forming a film on skin at a proper concentration. But, skin irritation may be caused with too high concentration of sodium silicate. We studied a desirable range of the sodium silicate concentration and combination with other fixatives for skin care formulation that has no sticky feels and no scrubbing out phenomenon. Immediate lifting gel was developed by using sodium silicate and various thickening systems. Among of the various thickeners, aluminum magnesium silicate showed the best compatibility with sodium silicate for rapid lifting effect. This instant physical lifting gel was confirmed as a low stimulating formula by skin clinical test.

• Journal of the Korean Geographical Society
• /
• v.38
• /
• pp.15-36
• /
• 1988

In this paper, I consider the development of methods in contemporary human geography in terms of a dialectical relation of action and structure, and try to draw a new horizon of method toward which geographical research and spatial theory would develop. The positivist geography which was dominent during 1960s has been faced both with serious internal reflections and strong external criticisms in the 1970s. The internal reflections that pointed out its ignorance of spatial behavior of decision-makers and its simplication of complex spatial relations have developed behavioural geography and systems-theoretical approach. Yet this kinds of alternatives have still standed on the positivist, geography, even though they have seemed to be more real and complicate than the previous one, The external criticisms that have argued against the positivist method as phenomenalism and instrumentalism suggest some alternatives: humanistic geography which emphasizes intention and action of human subject and meaning-understanding, and structuralist geography which stresses on social structure as a totality which would produce spatial phenomena, and a theoretical formulation. Human geography today can be characterized by a strain and conflict between these methods, and hence rezuires a synthetic integration between them. Philosophy and social theory in general are in the same in which theories of action and structural analysis have been complementary or conflict with each other. Human geography has fallen into a further problematic with the introduction of a method based on so-called political ecnomy. This method has been suggested not merely as analternative to the positivist geography, but also as a theoretical foundation for critical analysis of space. The political economy of space with has analyzed the capitalist space and tried to theorize its transformation may be seen either as following humanistic(or Hegelian) Marxism, such as represented in Lefebvre's work, or as following structuralist Marxism, such as developed in Castelles's or Harvey's work. The spatial theory following humanistic Marxism has argued for a dialectic relation between 'the spatial' and 'the social', and given more attention to practicing human agents than to explaining social structures. on the contray, that based on structuralist Marxism has argued for social structures producing spatial phenomena, and focused on theorising the totality of structures, Even though these two perspectives tend more recently to be convergent in a way that structuralist-Marxist. geographers relate the domain of economic and political structures with that of action in their studies of urban culture and experience under capitalism, the political ecnomy of space needs an integrated method with which one can overcome difficulties of orthhodox Marxism. Some novel works in philosophy and social theory have been developed since the end of 1970s which have oriented towards an integrated method relating a series of concepts of action and structure, and reconstructing historical materialism. They include Giddens's theory of structuration, foucault's geneological analysis of power-knowledge, and Habermas's theory of communicative action. Ther are, of course, some fundamental differences between these works. Giddens develops a theory which relates explicitly the domain of action and that of structure in terms of what he calls the 'duality of structure', and wants to bring time-space relations into the core of social theory. Foucault writes a history in which strategically intentional but nonsubjective power relations have emerged and operated by virtue of multiple forms of constrainst wihthin specific spaces, while refusing to elaborate any theory which would underlie a political rationalization. Habermas analyzes how the Western rationalization of ecnomic and political systems has colonized the lifeworld in which we communicate each other, and wants to formulate a new normative foundation for critical theory of society which highlights communicatie reason (without any consideration of spatial concepts). On the basis of the above consideration, this paper draws a new norizon of method in human geography and spatial theory, some essential ideas of which can be summarized as follows: (1) the concept of space especially in terms of its relation to sociery. Space is not an ontological entity whch is independent of society and has its own laws of constitution and transformation, but it can be produced and reproduced only by virtue of its relation to society. Yet space is not merlely a material product of society, but also a place and medium in and through which socety can be maintained or transformed.(2) the constitution of space in terms of the relation between action and structure. Spatial actors who are always knowledgeable under conditions of socio-spatial structure produce and reproduce their context of action, that is, structure; and spatial structures as results of human action enable as well as constrain it. Spatial actions can be distinguished between instrumental-strategicaction oriented to success and communicative action oriented to understanding, which (re)produce respectively two different spheres of spatial structure in different ways: the material structure of economic and political systems-space in an unknowledged and unitended way, and the symbolic structure of social and cultural life-space in an acknowledged and intended way. (3) the capitalist space in terms of its rationalization. The ideal development of space would balance the rationalizations of system space and life-space in a way that system space providers material conditions for the maintainance of the life-space, and the life-space for its further development. But the development of capitalist space in reality is paradoxical and hence crisis-ridden. The economic and poltical system-space, propelled with the steering media like money, and power, has outstriped the significance of communicative action, and colonized the life-space. That is, we no longer live in a space mediated communicative action, but one created for and by money and power. But no matter how seriously our everyday life-space has been monetalrized and bureaucratised, here lies nevertheless the practical potential which would rehabilitate the meaning of space, the meaning of our life on the Earth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.100-105
• /
• 2015

The calculation method of infiltration loss in greenhouse has different ideas in each design standard, so there is a big difference in each method according to the size of greenhouses, it is necessary to establish a more accurate method that can be applied to the domestic. In order to provide basic data for the formulation of the calculation method of greenhouse heating load, we measured the infiltration rates using the tracer gas method in plastic greenhouses equipped with various thermal curtains. And then the calculation methods of infiltration loss in greenhouses were reviewed. Infiltration rates of the multi-span and single-span greenhouses were measured in the range of $0.042{\sim}0.245h^{-1}$ and $0.056{\sim}0.336h^{-1}$ respectively, single-span greenhouses appeared to be slightly larger. Infiltration rate of the greenhouse has been shown to significantly decrease depending on the number of thermal curtain layers without separation of single-span and multi-span. As the temperature differences between indoor and outdoor increase, the infiltration rates tended to increase. In the range of low wind speed during the experiments, changes of infiltration rate according to the outdoor wind speed could not find a consistent trend. Infiltration rates for the greenhouse heating design need to present the values at the appropriate temperature difference between indoor and outdoor. The change in the infiltration rate according to the wind speed does not need to be considered because the maximum heating load is calculated at a low wind speed range. However the correction factors to increase slightly the maximum heating load including the overall heat transfer coefficient should be applied at the strong wind regions. After reviewing the calculation method of infiltration loss, a method of using the infiltration heat transfer coefficient and the greenhouse covering area was found to have a problem, a method of using the infiltration rate and the greenhouse volume was determined to be reasonable.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.47-75
• /
• 2009

Recently, researches on Management Information Systems (MIS) have laid out theoretical foundation and academic paradigms by introducing diverse theories, themes, and methodologies. Especially, academic paradigms of MIS encourage a user-friendly approach by developing the technologies from the users' perspectives, which reflects the existence of strong causal relationships between information systems and user's behavior. As in other areas in social science the use of structural equation modeling (SEM) has rapidly increased in recent years especially in the MIS area. The SEM technique is important because it provides powerful ways to address key IS research problems. It also has a unique ability to simultaneously examine a series of casual relationships while analyzing multiple independent and dependent variables all at the same time. In spite of providing many benefits to the MIS researchers, there are some potential pitfalls with the analytical technique. The research objective of this study is to provide some guidelines for an appropriate use of SEM based on the assessment of current practice of using SEM in the MIS research. This study focuses on several statistical issues related to the use of SEM in the MIS research. Selected articles are assessed in three parts through the meta analysis. The first part is related to the initial specification of theoretical model of interest. The second is about data screening prior to model estimation and testing. And the last part concerns estimation and testing of theoretical models based on empirical data. This study reviewed the use of SEM in 164 empirical research articles published in four major MIS journals in Korea (APJIS, ISR, JIS and JITAM) from 1991 to 2007. APJIS, ISR, JIS and JITAM accounted for 73, 17, 58, and 16 of the total number of applications, respectively. The number of published applications has been increased over time. LISREL was the most frequently used SEM software among MIS researchers (97 studies (59.15%)), followed by AMOS (45 studies (27.44%)). In the first part, regarding issues related to the initial specification of theoretical model of interest, all of the studies have used cross-sectional data. The studies that use cross-sectional data may be able to better explain their structural model as a set of relationships. Most of SEM studies, meanwhile, have employed. confirmatory-type analysis (146 articles (89%)). For the model specification issue about model formulation, 159 (96.9%) of the studies were the full structural equation model. For only 5 researches, SEM was used for the measurement model with a set of observed variables. The average sample size for all models was 365.41, with some models retaining a sample as small as 50 and as large as 500. The second part of the issue is related to data screening prior to model estimation and testing. Data screening is important for researchers particularly in defining how they deal with missing values. Overall, discussion of data screening was reported in 118 (71.95%) of the studies while there was no study discussing evidence of multivariate normality for the models. On the third part, issues related to the estimation and testing of theoretical models on empirical data, assessing model fit is one of most important issues because it provides adequate statistical power for research models. There were multiple fit indices used in the SEM applications. The test was reported in the most of studies (146 (89%)), whereas normed-test was reported less frequently (65 studies (39.64%)). It is important that normed- of 3 or lower is required for adequate model fit. The most popular model fit indices were GFI (109 (66.46%)), AGFI (84 (51.22%)), NFI (44 (47.56%)), RMR (42 (25.61%)), CFI (59 (35.98%)), RMSEA (62 (37.80)), and NNFI (48 (29.27%)). Regarding the test of construct validity, convergent validity has been examined in 109 studies (66.46%) and discriminant validity in 98 (59.76%). 81 studies (49.39%) have reported the average variance extracted (AVE). However, there was little discussion of direct (47 (28.66%)), indirect, and total effect in the SEM models. Based on these findings, we suggest general guidelines for the use of SEM and propose some recommendations on concerning issues of latent variables models, raw data, sample size, data screening, reporting parameter estimated, model fit statistics, multivariate normality, confirmatory factor analysis, reliabilities and the decomposition of effects.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.17-23
• /
• 2005

We had previously reported that Selina (selina-4(14), 7(11)-dien-8-one) was isolated from methanol extract of Afractylodes rhizome and has strong whitening activity in B16 melanoma cells. In this report, we demonstrated its action mechanism in melan-a cells, non-tumorigenic melanocytes. We also investigated the clinical efficacy of cosmetic preparation containing Selina. Selina reduced the melanin synthesis of Melan-a cells by $50\%$ at a concentration of $10 {\mu}g/mL$ without any apparent cytotoxicity. We also found that the treatment of cells with Selina decreased tyrosinase activity by $60\%$ at a concentration of $10 {\mu}g/mL$ but Selina was not a direct inhibitor of tyrosinase activities. To elucidate the action mechanism of Selina, we investigated the changes in mRNA and protein level of tyrosinase, TRP-1 and TRP-2 using RT-PCR and western blotting, respectively. As a result, the mRNA and protein level of tyrosinase were markedly reduced at $10 {\mu}g/mL$ of Selina without any effect on TRP-1 and TRP-2. These results suggest that Selina exerts its whitening effect mainly through regulating expression of tyrosinase. A 7 week-clinical trial using formulation containing $0.2\%$ selina-4(14), 7(11)-dien-8-one with 20 volunteers resulted in statistically significant whitening effect (p < 0.05), without any adverse effect. Based on these results, Selina (selina-4(14), 7(11)-dien-8-one) can be s useful and safe ingredient for the cleanness and brightness of skin.