• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.201-206
• /
• 2012

PURPOSES: This study evaluated a measuring technique for tire-pavement interaction noise that uses a noble close proximity (NCPX) method as well as for noise level measured inside of a car (e.g., Inside Noise Level) in term of rumble strips constructed at a tall gate. METHODS: According to the measurements of NCPX and inside noise level (INL), 1/3 octave band frequency analysis and overall noise level calculation were conducted in order to evaluate noise levels of NCPX and INL, depending on types of rumble strips. RESULTS: The tested sections of general concrete pavement surface and two different types of rumble strips were evaluated, using 1/3 octave band frequency analysis and overall noise level. From the analyzed results, it can be concluded that rumble strips generate a relatively huge noise levels when compared to the concrete pavement surface. CONCLUSIONS: Noting that above 3 dBA different noise levels can let drivers know that they are getting close to toll gate; therefore, they should apply their brakes. Thus, the noise levels of rumble strips are required to be reduced, based on considering the neighbors living near toll gates.

• 한국강구조학회 논문집
• /
• 제26권2호
• /
• pp.69-79
• /
• 2014

본 연구에서는 콘크리트 섬유보강플라스틱(FRP)로 보강된 철골보의 정적 휨하중상태에서 휨거동에 관한 실험결과를 제시하였다. 아라미드섬유 스트립과 탄소섬유 스트립으로 보강된 4개의 실험체를 제작하였으며, 1개의 기준실험체를 제작하였다. 이중 두 실험체는 부분보강방식으로 보강되었다. H빔은 두 종류의 파괴모드를 가지고 있는데, (1) 부분보강 실험체에서는 FRP 스트립이 탈락(debonding)되는 파괴모드를 보이고 있으며, 전면보강 실험체에서는 FRP 스트립이 파단(rupture)되는 거동을 보이고 있다. 실험결과 16%의 휨내력 상승효과를 관찰하였다.

• Journal of Magnetics
• /
• 제4권1호
• /
• pp.5-9
• /
• 1999

Effect of sulfur segregation on tertiary recrystallization and magnetic induction during final annealing was investigated in a 3% Si-Fe electrical strip containing 6 ppm(LS) and 15 ppm(HS) sulfur. During final annealing, Auger peak height of segregated sulfur on the surface of the strips reached a maximum, and then decreased to low level with increasing annealing time, which is attributed to sulfur segregation and evaporation. The magnetic induction of the thin-gauged 3% Si strip was inversely proportional to the Auger peak height of segregated sulfur on the surface. The overall profile for surface segregation of sulfur and B10 was observed, irrespective of sulfur content in Si-Fe strips, but the peaks of LS strips appeared earlier than those of HS strips. The grain growth rate of the LS strips during final annealing was faster than that of the HS strips, which may be attributed to the pinning effects of segregated sulfur. With increasing final annealing temperature, B10 value increased rapidly and the saturation level in B10 increased.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1422-1431
• /
• 2018

We investigated the additional (secondary) cooling effect of casted strips on the magnetic properties of Nd-Fe-B sintered magnets. The Nd-Fe-B sintered magnets were fabricated with the casted strips prepared without and with additional cooling. Additional cooling was achieved by blowing Ar gas at various pressures (0.1, 0.3, and 0.6 MPa) on the free-side surface of the strips during the strip-casting process. The higher magnetic properties of $H_c$, $B_r$, and $(BH)_{max}$ of the final Nd-Fe-B sintered magnets were obtained for 0.1 MPa rather than for 0.0 MPa. The best microstructure of the columnar grains in the casted strips was produced with the aid of a lower pressure of gas on the free-side surface. It was found that the microstructure of the strips affects the distribution of grains grown in the sintered magnets. This report demonstrates that the improved magnetic performance of Nd-Fe-B sintered magnets was achieved via additional gas cooling.

• Computers and Concrete
• /
• 제27권5호
• /
• pp.437-445
• /
• 2021

Retrofitting of structures has gained importance over the recent years. Particularly, Reinforced Cement Concrete (RCC) column strengthening has become a challenge to the structural engineers, owing to the risks and complexities involved in it. There are several methods of RCC column strengthening viz. RCC jacketing, steel jacketing and Fiber Reinforced Polymer (FRP) wrapping etc., FRP wrapping is the most promising alternative when compared to the others. The large research database shows FRP wrapping, through lateral confinement, improves the axial load carrying capacity of the columns under concentric loading. However, its confining efficiency reduces under eccentric loading. Hence a relative newer technique called Near Surface Mounting (NSM), in which Carbon FRP (CFRP) strips are epoxy grouted to the precut grooves in the cover concrete of the columns, has been thrust domain of research. NSM technique strengthens the column nominally under concentric load case while significantly under eccentric case. A novel configuration of NSM in which the vertical NSM (VNSM) strips are being connected by horizontal NSM (HNSM) strips was numerically investigated under both concentric and eccentric loading. It was found that the configuration with 6 HNSM strips performed better under eccentric loading than under concentric loading, while the configuration with 3 HNSM strips performed better under concentric loading than under eccentric loading. Hence an optimum of 4 HNSM strips is recommended as strengthening measure for the given column specifications. It was also found that Aluminum alloy cannot be used instead of CFRP in NSM applications owing to its lower mechanical properties.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.139-146
• /
• 2009

본 연구에서는 외부프리스트레스 탄소섬유판에 의한 보강기술에서 긴장력을 포함하는 지속하중이 작용하였을 때의 장기거동을 평가하기 위한 실험연구를 수행하였다. 지속하중 도입을 위한 실험계획은 탄소섬유판에 직접 인장력을 도입하는 직접 지속하중 방식과 휨 실험체를 통한 휨 지속하중으로 구분하여 실시하였다. 직접 지속하중에 의한 실험은 탄소섬유판의 종류별로 약 700일에 걸쳐 실시하여 탄소섬유판의 장기 크리프/릴렉세이션 등의 변형을 주로 평가하였으며, 휨 지속하중 실험에서는 탄소섬유판의 정착시 정착장치에서의 슬립량을 주로 평가하기 위해 약 90일 간으로 수행되었다. 일방향 탄소섬유판에 대한 2년간의 지속하중 실험 결과에 의하면, 탄소섬유판의 크리프나 릴렉세이션과 같은 재료자체의 변형 및 정착장치에서의 슬립에 기인한 응력손실은 적은 것으로 나타났다. 그러나, 강판매입형 탄소섬유판은 강판의 항복변형률을 초과하여 도입된 긴장력으로 인하여 재료 자체의 변형에 의한 자체 응력손실이 발생되었으므로 이에 대한 보완이 필요한 것으로 판단된다. 아울러, 탄소섬유판의 정착과정에 발생되는 긴장력의 즉시 손실량은 응력도입 초기의 약 10% 정도이므로 프리스트레스의 도입시에는 이를 고려하여 긴장력을 결정할 필요성이 있을 것으로 판단된다.

• 만화애니메이션 연구
• /
• 통권10호
• /
• pp.1-16
• /
• 2006

본 논문에서는 한국 신문네칸만화에 있어서 언어유희의 기법과 그 기능을 분석하였다. 우리나라 신문네칸만화는 생활만화로 정착한 서구의 네칸만화와 달리 시사만화로 발달하면서 정보전달의 기능이 중시되는 미디어적 특성을 갖게 되었다. 이 때문에 네칸만화는 무엇보다 정확하고 함축적인 언어의 힘을 크게 필요로 하는 장르로 자리잡게 되었다. 또한 한국 네칸만화는 그 성장과정에서 국가권력의 과도한 통제로 인해 의미전달에 있어서 직접성이 강한이미지 기법보다 우회적 표현이 가능한 언어 기법의 모색에 천착하게 되었다. 그 결과 우리나라 네칸만화텍스트는 ‘수사법의 보고(寶庫)’라고 할 만큼 다채로운 언어운용의 방법들을 보여준다. 본 논문에서는 네칸만화에 있어서 만화의 주된 효과인 재미와 감동 창출의 동력이며 창작의 원리로 작동해온 수사법들 중에서 언어운용의 방법들을 단적으로 보여주는 언어유희의 기법을 살펴고자 한다. ‘촌철살인()의 미학’으로 요약되는 우리나라 네칸만화에 나타난 언어라는 요소의 기능과 가치에 대한 고찰은 만화예술에 있어서 언어가 갖는 중요성을 환기시킨다.

• 콘크리트학회논문집
• /
• 제21권3호
• /
• pp.337-345
• /
• 2009

본 연구에서는 탄소섬유판이 외부 부착, 표면 매입 그리고 외부부착 및 표면매입이 혼합된 보강 방식의 철근콘크리트 부재의 전단 거동 및 전단 보강 효과를 구명하고자 하였다. 본 연구 결과, 표면매입 탄소섬유판 및 외부부착과 표면매입으로 혼용된 탄소섬유판으로 보강된 철근콘크리트 보의 전단 강성 및 극한 전단강도는 섬유판으로 보강되지 않은 보에 비하여 크게 증진되는 것으로 나타났다. 표면매입 탄소섬유판 및 외부부착과 표면매입으로 혼용된 탄소섬유판으로 보강된 철근콘크리트 보의 파괴는 전단균열로 시작되었으며, 하중이 증가함에 따라 하중 재하점과 가장 인접한 매입 탄소섬유판 하단 모서리에서 발생한 휨 균열은 하중재하점 방향으로 급격하게 진행되었고, 하중 재하점과 휨 균열을 연결하는 압축파괴가 발생되었다. 이러한 사실은 매입 섬유판의 전단보강 효과가 매우 우수하여 보가 전단으로 파괴되지 않고 섬유판이 매입 보강되지 않은 휨 구역에서 압축파괴가 발생하고 있음을 설명하고 있다. 매입 탄소섬유판 보강부재 및 탄소섬유판 부착 및 매입을 혼용한 부재에서는 매입 탄소섬유판의 변형률이 각각 0.45% 및 0.35%로 나타났으며, 외부 부착 탄소섬유판의 변형률이 약 0.3%로 나타났다.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.210-219
• /
• 1992

The measurement of the apparent and tap density for Al-Pb-X(Sn,Sn-Si) powders produced by centrifugal atomizer showed that the larger theoretically calculated densities the larger those densities. And tap densities were not over 50% of the theoretical densities. The nip angle of Al-5wt%Pb alloy powders produced with 38000 r.p.m. of disk rotation was $3^{\circ}$ degree larger than that of Al-8.5wt%Pb-3wt%Sn(-4wt%Si, 8wt%Si) with 50000 r.p.m. The effects of roll gap and rolling speed on thickness and density of the single strips by rolling were that rolling speed increasing the thickness and density of strip decreased and roll gap increasing, the thickness of strip increased but the density decresed. The compactibility of Al-Pb-X with Al by rerolling showed that the coarse powder-strips were better than fine powder-strips. From the SEM study with EDX analysis on the sintered strips, it was found that Pb and Sn were segregated with maximum size $5{\mu}m$, and Si existed surrounding the segregation zone. After sintering the clad strips at $500^{\circ}C$, the pores, which were spherical with $5{\mu}m$ of mean diameter, partly remained around the particles of alloy powders area, while completely disappeared at clad interface. The hardness of strips of alloy powders decreased linearly with increasing sintering temperature.

• 동의생리병리학회지
• /
• 제19권6호
• /
• pp.1622-1628
• /
• 2005

This study was undertaken to define the effect of SoPung-Tang extract on hypertension in spontaneous hypertensive rat and norepinephrine- induced arterial contraction in rabbit. In order to investigate the effect of SoPung-Tang extract on contracted rabbit carotid arterial strips, transverse strips with intact or damaged endothelium were used for the experiment using organ bath. To analyze the mechanism of SoPung-Tang extract-induced relaxation, SoPung-Tang extract infused into contracted arterial strips induced by norepinephrine after treatment of indomethacin, Nu-nitro-L-arginine, methylene blue or tetraethylammonium chloride. Blood pressure was significantly decreased five days after administration of SoPung-Tang extract. SoPung-Tang extract relax arterial strip with endothelium contracted by norepinephrine, but in the strips without endothelium, SoPung-Tang extract- induced relaxation was significantly inhibited. SoPung-Tang relax arterial strip contracted by norepinephrine, but in the strips contracted by high $K^+$, SoPung-Tang extract-induced relaxation was significantly inhibited. The endothelium-dependent relaxation induced by SoPung-Tang extract was decreased by the pre-treatment of $N{\omega}$-nitro-L-arginine or methylene blue, but it was not observed in the strips pre-treated with indomethacin or tetraethylammonium chloride. When $Ca^{2+}$ was applied, the strips which were contracted by norepinephrine in a $Ca^{2+}$-free solution, arterial contraction was increased. But pre-treatment of SoPung-Tang extract inhibited contractile response to $Ca^{2+}$. We suggest that SoPung-Tang could be applied effectively for hypertension and may suppress influx of extra-cellular $Ca^{2+}$ through the formation of nitric oxide in the vascular endothelial cells.