• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.100-104
• /
• 2019

We have investigated the feasibility of fabricating fine stripes using needle coating for potential applications in solution-processed organic light-emitting diodes (OLEDs). To this end, we have employed an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution that has been widely used as a hole injection layer (HIL) of OLEDs and performed needle coatings by varying the process parameters such as the coating gap and coating speed. As expected, the stripe width is reduced with increasing coating speed. However, the central thickness of the stripe is rather increased as the coating speed increases, which is different from other coating processes such as slot-die and blade coatings. It is due to the fact that the meniscus formed between the needle tip and the substrate varies depending sensitively on the coating speed. It is also found that the stripe width and thickness are reduced with increasing coating gap. To demonstrate its applicability to OLEDs, we have fabricated a red OLED stripe and obtained light emission with the width of about 90㎛.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.73-78
• /
• 2020

There appears lateral capillary force in a hydrophilic flat needle employed for the fabrication of fine organic thin-film stripes, bringing in an increase of the stripe width. It also causes the stripe thickness to increase with increasing coating speed, which is hardly observed in a normal coating process. Through computational fluid dynamics (CFD) simulations, we demonstrate that the lateral capillary flow can be substantially suppressed by increasing the contact angle of the needle end. Based on the simulation results, we have coated the outer surface of the flat needle with a hydrophobic material (polytetrafluoroethylene (PTFE) with the water contact angle of 104°). Using such a hydrophobic needle, we can suppress the lateral capillary flow of an aqueous poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) (PEDOT:PSS) to a great extent, rendering the stripe narrow (63 ㎛ at 30 mm/s). Consequently, the stripe thickness is decreased as the coating speed increases. To demonstrate its applicability to solution-processable organic light-emitting diodes (OLEDs), we have also fabricated OLED with the fine PEDOT: PSS stripe and observed the strong light-emitting stripe with the width of about 68 ㎛.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.1-15
• /
• 2006

The purpose of this research is to find out the effect of clothing style and mixtures of stripe pattern direction, width, and coloration of an upper garment. The experimental materials made for this study are a set of stimuli and response scale(The 7-Point semantic). The subjects were 480 female undergraduate students in Seoul, Busan, Gyung-nam. The 80 stimuli which were variously incorporated with clothing styles and stipe patterns were assessed by the students. The following contents summarizes the results of the research. Impression factors of the stimuli consists of the 5 dimensions(Attractiveness, Show, Activity, Clearness, mildness). Amon these, the Attractiveness and Show dimensions proved to be more important. The clothing style and pattern direction indicated main effect in attractiveness and activity dimension. The pattern coloration showed a significant effect in dimensions except attractiveness and clearness. The pattern width had a significant effect only in the activity. Significant interaction effects of each clothing clause were found in the attractiveness, activity and clearness, but Show and mildness had no significant interaction effect. This research, as the 06 S/S, F/W trend, is a meaningful study in that it handled in the form of expression the stripe pattern used unrestrictedly in the casual wear or the formal wear by a fashion keyword.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.64-69
• /
• 2010

We investigated the variation in contact angle of a nano-sized water droplet on a nano stripe-patterned surface using molecular dynamics simulation. By changing the height and width of the stripe pillar, and the gap width of the stripes, we observed the contact angle of water droplet in equilibrium. When the surface energies were 0.1 and 0.3 kcal/mol, the calculated contact angles were in good agreement with the Cassie and Baxter equation. However, when the surface energy is 0.5 kcal/mol, the contact angles are observed to be perturbed along the Cassie and Baxter equation.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.113-127
• /
• 2004

This study examined the trend of pattern which appeared throughout men's clothing fashion magazine from 1999 to 2002 and the influence which the demographic characteristic have on the sensibility dimension of pattern and the preference degree of kinds of pattern. The results of study were as follows. 1) The pattern which was used most frequently on recent men's clothing was a length stripe, and the representation technique which was used most frequently on recent men's clothing was the technique of a geometric expression. 2) The pattern which men and women preferred most out of ten kinds of patterns-length stripe, width stripe, oblique stripe, check, square, waterdrop, paisley, flower of style shape, flower of realistic shape, flower of shape-was a length stripe. 3) The sensibility dimension of pattern image was composed of fascination, dignity, daring, gentleness, and reality. 4) Because sensitivity dimension and kinds of pattern were significant according to the distinction of sex, vocation, academic career, income, this study can conclude the demographic characteristic have an influence on sensitivity dimension and kinds of pattern.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.71-80
• /
• 2014

The purpose of this study was to investigate consumer evaluation on visual sensibility of stripe pattern shirts for separation coloration. The experimental materials developed for this study were a set of clothing stimuli and response scales. The clothing stimuli were 27 color pictures, in which separation color(white: W, gray: G, black: B), separation width(small: S, medium: M, large: L), and combination color(magenta and yellow: MY, magenta and cyan: MC, yellow and cyan: YC) were manipulated. The subjects of this research were female in their 20s to 30s living in Seoul, Gwangju, Daegu, Busan, and Changwon. The investigation was carried out at December 2013. The data were analyzed by using SPSS program. Analysis methods were factor analysis, ANOVA, and Duncan-test. Results of this study were as follow.; The factors of visual sensibility according to separation color, separation width, and combination color consisted of four dimensions of attractiveness, appeal, individuality freshness, and grace. Separation color showed an independent effect on appeal and individuality freshness. Combination color showed an independent effect on individuality freshness. Interaction effects of separation color and separation width on appeal were found. Interaction effects of separation color and combination color on individuality freshness and grace were found. The study results are highly expected to be used as useful sources in a fashion product.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.15-21
• /
• 1983

In this paper, the theoretical analysis of lateral guiding mechanism in stripe geometry Double Heterojunction Laser Diode is performed. In the analysis, the spatial variations of gain form refractive index profile are modeled by the mathematical form of injected current density and the beam width variations dependence of active layer, stripe width & cavity length have been analyzed by perturbed mode equation.

• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.113-125
• /
• 2010

This study is purpose to trace a genealogy of Rainbow stripe in 30 ethnic costumes in East Asia. And with through comparative views between Korean and the other minority that is shown a bilateral relation of rainbow stripe in their costume, we make sure the unique character of rainbow stripe in Korean traditional costume. The stripe in the costumes was generally used on sleeves with 3~6 patches. There were 10 types of methods for making the stripe including sewing. Weaving and sewing with trimming was also frequently used either and the stripe by weaving with multicolored yarns were mostly found in the southern region of china. Black, blue and red were frequently used in the costume as a main color that was contrasted with rainbow stripe and especially, black was mostly used. Korean preferred bright colors as a main color. Contents of the genealogy of the multicolored stripe in ethnic costume in East Asia are followed. The 28 ethnic groups who used the stripe in their dress except Korean, the Mans, Mongo people and Tibetan were located in the southern region of East Asia. And the other ethnic groups distributed in the northwest and northeast region of East Asia. The distribution of the rainbow stripe in the costume could be grouped into two sections: the southern region people and Korean-the Mongol people-the Tus- the Zangs group. And the latter group was shown strong relation with the culture of Korean's rainbow stripe costume. 11 ethnic peoples including Korean, the Vis, the Miaos, the Tus, the Mongol people, the Chaoxians, the Zangs, the Lahus, the Jinuos, the Hanis, the Luobas and the Dulongs, were saliently used the stripe in their costume. The stripe in Japanese costume was judged that was not a kind of the rainbow stripe was shown the other ethnic groups, was a color arrangement by layered dress or geometrical pattern. From above, we could recap a particular characteristic of the rainbow stripe in Korean traditional costume. Many colors were used in the stripe and bodies than the other ethnic people and the color was bright. In many cases, a color of patch at the point of armhole was red and Black color was not used in the stripe. The width of patch was a relatively narrow and regular. It has shown that the rainbow stripe in Korean traditional costume was organized independently.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.2
• /
• pp.321-330
• /
• 2022

This study analyzed the difference between 2D image and 3D virtual clothing images based on stripe arrangement to obtain fundamental data for slim appearance. First, the slimming effect according to the three types of stripe ratio was examined. Subsequently, the slimming effects of seven types of one-piece dress designs according to the stripe location were analyzed. Subjective ranking was evaluated. The width items and radius of curvature were measured for the image's respective parts. Consequently, in 2D image and 3D virtual clothing images, the one with the narrowest stripe ratio was evaluated as the slimmest; however, the conditions for the slimming effect were different. In the seven one-piece dress designs, a difference was apparent in the ranking of the 2D image and 3D virtual clothing images. In the 3D virtual clothing image, arranging the stripes on the entire garment proved inefficient. The stripes were curved according to the curvature of the human body, creating an optical illusion that differed from that of the 2D image.