• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.519-528
• /
• 2004

대부분의 용접재는 용접 후 빠른 속도로 냉각하는 과정에서 재료조직의 변화, 즉 상변태(마르텐사이트변태)가 일어난다. 그리고 이러한 상변태에 의한 체적의 팽창은 특히 고강도강재의 용접시 용접부의 잔류응력완화에 기여한다. 따라서 고강도강을 적용한 강구조물 접합부의 잔류응력 특징을 파악하기 위해서는 고강도강 용접시 상변태가 잔류응력완화에 미치는 효과를 정량적으로 평가할 수 있는 수치적 모델을 확립해야 한다. 본 연구에서는 고강도강 용접시 상변태에 의한 체적의 팽창이 잔류응력 완화에 미치는 영향을 잔류응력 측정 실험을 통하여 조사하였고, 이를 바탕으로 상변태에 의한 잔류응력완화를 고려한 고강도강 및 이종강재 용접접합부의 잔류응력 특징을 3차원 열탄소성 해석기법 개발을 통하여 재현하였다.

• 열처리공학회지
• /
• 제5권4호
• /
• pp.201-208
• /
• 1992

An experimental study of the constitutive response of precipitation-strengthened Al-0.55wt% Zr alloy, which consists of an Al matrix precipitation-strengthened by coherent particles, ${\beta}^{\prime}(Al_3Zr)$ with $L1_2$ structure has been performed. The deformation response of the materials has been examined by stress relaxation test at 573K, 623K and 673K. It was found that there exist the threshold stress during stress relaxation and threshold stress results from the presense of ${\beta}^{\prime}(Al_3Zr)$ particles. The ratio of threshold stress and Orowan stress decreased gradually with increasing temperature. The resistance to climb-pass of particles was independent of particles size for a fixed volume fraction although the threshold for bowing and particles cutting are sensitive to the particles dimensions. The smaller particles cutted by dislocations. This behavior of dislocations in this alloy was explained in terms of the small value antiphase boundary energy. The dislocation networks wrere more extensive in spesimens subjected to stress relaxation and there were numerous areas that have a high denstiy of jogged dislocation. This experiment results indicate that the rate controlling stress relaxation process is the climb of edge dislocation over particles.

• 대한간호학회지
• /
• 제34권2호
• /
• pp.213-224
• /
• 2004

Purpose: This study was aimed to evaluate the effect of progressive muscle relaxation training using biofeedback on perceived stress, stress response, immune response and climacteric symptoms, Method: This was a crossover, pre-post test design, The study subjects are 36 middle-aged women who were selected at 2 public health centers, The independent variable was Biofeedback training for 4 weeks, twice a week and home training for 4 weeks, Dependent variables were perceived stress, stress response, immune response, and climacteric symptoms measured with Hildtch's scale (1996), Result: Progressive muscle relaxation training using biofeedback was not effective in reducing perceived stress, but it was shown to be effective in reducing physiological stress responses such as pulse rate and EMG, Though blood pressure and skin conductance were repeatedly down, and skin temperature slowly increased, there were no statistically significant differences. Progressive muscle relaxation training using biofeedback was not effective in reducing serum cortisol, enhancing immune responses, or decreasing climacteric symptoms. Conclusion: The findings point to a pressing need for further, well-controlled and designed research with consideration in selection of subjects and instruments, frequency of measurements, the sampling method, and intervention modalities.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.57-62
• /
• 2014

미래형 유연소자 개발 시 비용감소 및 공정적합성 개선을 위해 동박을 잉크젯 프린팅법을 이용해 공중합체 유연기판 상 형성하고, 전기적 특성에 열처리 분위기가 미치는 영향을 확인하기 위해 3 종류의 환원분위기에서 열처리를 진행하여 보았다. 그 결과 200도의 낮은 온도에서 환원 특성이 뛰어난 포름산 분위기에서 전도체 수준의 비저항은 얻을 수 있었으나, 열처리 시 발생하는 응력으로 인해 발생된 표면균열에 기인해 그 값이 기존 동박에 비해 매우 높았다. 이에 비정질재료에서 응용되는 응력해소법을 응용하여 표면균열을 억제한 결과 230도 열처리 시 기존 열처리 방법에서는 $7.4{\mu}{\Omega}cm$의 비저항을 보이나, 응력해소를 통한 표면 균열이 억제된 시편에서는 $3.4{\mu}{\Omega}cm$의 비저항 값을 얻을 수 있었다. 특히 등온열처리에 의한 응력해소 효과를 확인하기 위해 동일 온도에서 등온시간 없이 열처리를 진행한 결과, 표면균열이 억제되지 못함을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.413-419
• /
• 1992

The theoretical equation for the relaxation spectrum of nonlinear viscoelastic polymeric material was derived from the Ree-Eyring and Maxwell non-Newtonian model. This model consists of infinite number of hyperbolic sine law Maxwell elements coupled in parallel plus a spring without a dashpot. Infinite number of nonlinear viscoelastic Maxwell elements can be used by specifying distribution of relaxation times, hole volumes, molecular weights, crystallite size and conformational size, etc. The experimentals of stress relaxation were carried out using the tensile tester with the solvent chamber. The relaxation spectra of nylon 6 filament fibers in various electrolytic solutions were obtained by applying the experimental stress relaxation curves to the theoretical equation of relaxation spectrum. The determination of relaxation spectra was performed from computer calculation.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.331-334
• /
• 2009

본 논문에서는 원자적 계산(atomistic calculation)을 위한 해석적 모델로 surface relaxation model을 제시한다. 기존의 분자정역학(molecular statics)이 모든 원자의 위치를 자유도로 선정하여 사용하는데 반하여, 이 모델은 면내방향에 해당하는 두 개의 자유도로 나노박막의 원자 위치를 기술하는 매우 간단한 방법이다. 본 연구에서는 surface relaxation model을 이용하여 표면응력(surface stress)과 표면강성계수(surface stiffness tensor)와 같은 표면인자(surface parameter)의 계산을 수행하고, surface stress model을 이용하여 평형상태에서의 원자의 위치정보를 계산한다. 그리고 surface relaxation model을 검증하기 위하여 분자동역학 전산모사(molecular dynamics simulation)의 수치 결과가 제시되며, 본 연구에서 계산한 equilibrium strain과 비교 검증한다.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.162-169
• /
• 2006

Steel cord which is used as reinforcement in car tires is produced by wet-drawing process. Recently the quality improvement of the steel cord product is demanded by the tire market. After cold drawing process, produced residual stresses have a harmful effect on the durability of the wire and become the cause which decreases the quality of the product. Therefore, to improve the quality of the steel cord product, the research regarding the method of residual stress relaxation is necessary. To evaluate the quality of the cold drawn wire, it is very important to measure the residual stress, because the residual stress decides a variety of the quality level which is demanded in the cold drawn wire. The aim of this study is to propose residual stress relaxation method in the drawn wire using FE-analysis. The validity of the analysis results was verified by Nano indentation test.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.245-250
• /
• 2011

Poly(acrylonitrile)-poly(vinyl chloride) 공중합체 섬유의 비결정성 영역에서의 자체 확산 계수와 홀 부피를 응력완화 실험으로 규명하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 이론적인 응력완화식 에 응력완화 실험 결과를 적용하여 여러 가지 유동 파라메타를 계산하였다. 유동 파라메타로부터 섬유고분자 물질의 홀부피, 자체확산, 점성, 열역학파라메타 등을 계산하였다. 이들 시료의 유동 파라메타는 유동 단위의 홀 부피, 자체확 산, 유동 활성화 에너지와 직접적인 연관을 갖는 것으로 규명되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.751-754
• /
• 2000

Stress relaxation experiments were performed to obtain the material properties to be used in the linear viscoelastic study. Master curve of the modulus of polystyrene were obtained by using the time-temperature superposition principle. Because Shyu and Tobolsky's tensile relaxation modulus master curve or Polystyrene material showed very large difference, in-house data were required to calculate the residual stresses in injection-molded products more accurately. Our own experimental data showed that the master curve Shyu's data should be shifted about two orders in material time coordinate.

• 한국염색가공학회지
• /
• 제8권6호
• /
• pp.33-39
• /
• 1996

The purpose of this study was to investigate the structural characteristics, mechanical properties, and stress-relaxation behavior of PET filament, which were prepared at various spinning speeds(1650, 3300, 4500, 5000, 5500, and 6000 m/min) and anneal(12$0^{\circ}C$, 20 min & 15$0^{\circ}C$, 40 min). In 4500 m/min of spinning speed the crystallinity, crystallite size, and degree of orientation of PET filament rapidly increased. By increasing spinning speed, the temperature dependence of stress-relaxation sharply decreased. Same results were obtained from heat-treated samples. As a result, activation energy for stress-relaxation increased with the crystallinity and spinning speed.