• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.22-26
• /
• 1974

The effects of anisotropic mechanical stress applied normal to the surface of p-n junctions have been investigated. As the stress increased, the breakdown voltage was decreased and the breakdown mode became softer. Within a certain limitation in the applied stress, the above phenomena werw reversibbe, though relaxation and hysteresis phenomena were observed. The time constant of relaxation depended upon the shape of the stressing tip, but for the given tip and device a unique time constant was obtained. The stress.dependence of breakdown voltage showed a good linearity up to about 3.0${\times}10^4$ kgw/$\textrm{cm}^2$, when the flat tip of radius 15$\mu$ was used, and the temperatere-dependence of breakdown voltage under the stress also showed a good linearity in the temperature range of 100 to $300^{\circ}K$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.12
• /
• pp.3943-3959
• /
• 2022

People are constantly exposed to stress and anxiety environment, which could contribute to a variety of psychological and physical health problems. Therefore, it is particularly important to identify psychological stress in time and to find a feasible and universal method of stress reduction. This research investigated the influence of different music, such as relaxation music and natural rhythm music, on stress relief based on Electroencephalogram signals. Mental arithmetic test was implemented to create a stressful environment. 23 participants performed the mental arithmetic test with and without music respectively, while their Electroencephalogram signal was recorded. The effect of music on stress relief was verified through stress test questionnaires, including Trait Anxiety Inventory (STAI-6) and Self-Stress Assessment. There was a significant change in the stress test questionnaire values with and without music according to paired t-test (p<0.01). Furthermore, a model based on Transformer for stress level classification from Electroencephalogram signal was proposed. Experimental results showed that the method of listening to relaxation music and natural rhythm music achieved the effect of reducing psychological stress and the proposed model yielded a promising accuracy in classifying the Electroencephalogram signal of mental stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2342-2354
• /
• 2002

The present study has numerically predicted both the flow -induced and thermally-induced residual stresses and birefringence in injection o. injection/compression molded center -gated disks. Analysis system for entire molding process was developed based on an ap propriate physical modeling including a nonlinear viscoelastic fluid model, stress-optical law, a linear viscoelastic solid model, free volume theory for density relaxation phenomena and a photoviscoelasticity and so on. Part I presents physical modeling a nd typical numerical analysis results of residual stresses and birefringence in the injection molded center-gated disk. Thermal residual stress was found to be extensional near the center, compressive near the surface and tend to become toward tensional at the surface. A double-hump profile was obtained across the thickness in birefringence distribution: nonzero birefringence is found to be thermally induced, the outer peak is due to the shear flow and subsequent stress relaxation during the filling stage a nd the inner peak is due to the additional shear flow and stress relaxation during the packing stage. Predicted birefringence including both the flow -induced and thermally-induced one becomes quite similar to the experimental one.

• Applied Biological Chemistry
• /
• v.35 no.5
• /
• pp.399-403
• /
• 1992

The amounts of salt diffused into radish after immersing in various concentrations of salt solution at different temperatures were measured and the changes of radish texture by the salt diffusion were estimatedwith the viscoelastic constants of a 3 element solid model determined by a stress relaxation test. While the amount of salt diffused throught radish was increased with increasing the salt concentration and soaking temperature, the istantaneous stress, equilibrium elastic solid and viscoelastic constants of radish were decreased. Also the degree of stress relaxation and equilibrium elastic solid approached the same or zero values, as salt concentration was further increased. Viscoelstic constants as well as salt diffusion were more influenced by lower salt concentration with increased temperatures.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.4
• /
• pp.2237-2243
• /
• 2020

Background: The myofascial release technique is known to be an effective technique for increasing posterior fascia flexibility in short hamstring syndrome (SHS) subjects. But therapeutic mechanism of myofascial relaxation remains unclear. Recently, the theory of autonomic nervous system domination has been raised, however, a proper study to test the theory has not been conducted. Objectives: To investigate whether the application of the myofascial release technique can induce changes in the autonomic nervous system and affect the secretion of stress hormones and myofascial relaxation. Design: Quasi-experimental study. Methods: Twenty-four subjects with SHS were randomly divided into two groups. In the experimental group, the suboccipital muscle inhibition (SMI) technique was applied to the subjects for 4 min in supine position, and in the control group, the subjects were lying in the supine position only. A forward flexion distance (FFD) was conducted, blood pressure, heart rate, and cortisol levels were measured before and after the intervention and 30 min after intervention to determine myofascial relaxation and stress hormone levels. The evaluation was conducted separately in blind by an evaluator. Results: A FFD decreased in the experimental group, no change in cortisol was observed. On the contrary, a decrease in cortisol appeared in the control group after 30 minutes. Conclusion: The myofascial release technique is an effective treatment to increase the range of motion through posterior superior myofascial chain, but there is no evidence that myofascial release technique can control the autonomic nervous system.

• Journal of the Health Care and Life Science
• /
• v.10 no.2
• /
• pp.403-411
• /
• 2022

This study aim to investigate the effects of virtual reality (VR) intervention on stress reduction and relaxation after induced pain through capsaicin skin application for healthy college students. The control group (n=6) was to non-treatment after capsaicin-induced pain, and the experimental group (n=8) was to application VR intervention after capsaicin-induced pain. The effect was measured using VAS, EEG, HRV and as a results, the experimental group was more effective in regressing to baseline value (T_O) than the control group. Therefore, VR intervention is considered to be an effective intervention for stress relief and relaxation.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2003.05a
• /
• pp.93-98
• /
• 2003

In this paper, the main emphasis and focus will be to study and illuminate the nature of Plastic Energy Dissipation (PED) in variety of polymers. This PED term represents the heat generated during the irreversible deformation of a polymer solid. A series of experiments for various polymers have been conducted in direct measurement method and indirect evaluation method - the incremental strain stress relaxation ((ISSR) method. The experimental evidence to relate the stress relaxation and the sensible temperature rise were revealed by the series of direct method experiments.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.266-268
• /
• 2003

Residual stresses, which can be produced during the manufacturing process, play an important role in an industrial field. Residual stresses of structures by welding process are exerting negative effect on the fatigue behavior and safety of structure. Results from the elasto-plastic finite element analysis of the welds for a nuclear component, the residual stress distribution after welding. In this study, a finite element technique is developed to simulate the relaxation of the residual stresses due to the mechanical loads of welds.

• YAKHAK HOEJI
• /
• v.25 no.4
• /
• pp.175-179
• /
• 1981

Rheological studies on the gelatin hydrogels were carried out by rheometer. In the temperature range of $32^{\circ}~90{\circ}C$, the viscosities of the gelatin hydrogels were measured. In order to observe the formation of gel structure, the stress-relaxation tests of the creep-curves were investigated. The structure of viscoelastic substance could be considered of a three dimensional crosslinked matrix. As the result viscoelastic coefficients were obtained by Maxwell element, which are correspond to the network structure. From the relationship between the stress-relaxation time and temperature, activation energy correspond to breaking the formation of gels was calculated to be 13.91kcal/mole.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.496-500
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But plastic parts are usually distorted after injection molding due to the residual stress after filling, packing, cooling process, and etc. And plastic material is to be deteriorated according to various temperature conditions and operating time, which can be characterized by stress relaxation and creep. The viscoelastic behavior of plastic materials in time domain can be expressed by the Prony series of the commercial code, ABAQUS. In the paper, the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.