• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.101-106
• /
• 2007

Uniaxial displacement controlled tests were performed on annealed Type 304 stainless steel at room temperature. A servo-controlled testing machine and strain measurement on the gage length were employed to measure the response to a given input. The test results exhibit that the flow stress increases nonlinearly with the strain rate and the relaxed stress at the end of the relaxation periods depends strongly on the strain rate preceding the relaxation test. The rate-dependent inelastic deformation behavior is simulated using a new unified viscoplasticity model that has the rate-dependent format of nonlinear kinematic hardening rule, which plays a key role in modeling the rate dependence of relaxation behavior. The model does not employ yield or loading/unloading criteria and consists of a flow law and the evolution laws of two tensor and one scalar-valued state variables.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.262-268
• /
• 1999

Effect of carbon blacks (CBs) on the stress relaxation and the elastic recovery of uncrosslinked natural rubber (NR) was examined. It was found that if the type of CB is characterized by smaller size and higher structure, the stress relaxation is more delayed and the elastic recovery becomes more active. These results are attributed to the degree of bound rubber, i.e., the interaction between NR and CB.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.138-147
• /
• 1994

The stress relaxation and creep characteristics of fruits have usually been fit to an exponential expression based on a generalized Maxwell model and Burger's model. It is known that two to three terms in the expansion of those models are necessary to obtain a satisfactory fit to the rheological characteristics of fruits. Since four to six constants appear in the models, it is very difficult to determine their physical meaning according to the experimental conditions and levels. Therefore in order to ease the comparison of data, this study was conducted to develop the linearized rheological model of the fruit from the previous studies of stress relaxation and creep characteristics of fruits. Stress relaxation and creep characteristics were able to normalize and presented in the linear form of $t/S(t)=K_1+k_2t$ and $t/C(t)={K_1}^{\prime}+{K_2}^{\prime}t$, respectively. It was possible to compare the effects of experimental conditions and levels much easier from the linearized models developed in this study than from the generalized Maxwell model and Burger's model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.77-86
• /
• 2011

The concrete creep deformation of a hybrid composite section can cause additional deformation of the composite section and the stress relaxation of pre-compressive stress on the concrete section due to partial restraint of the deformation. In this study, the stress relaxation coefficient method (SRCM) is derived for simple analysis of complicate hybrid or composite sections for engineering purpose. Also, an equation of the stress relaxation coefficient (SRC) required for the SRCM is proposed. The SRCM is derived with the parameters of a creep coefficient, section and loading properties using the same method as the constant-creep step-by-step method (CC-SSM). The errors of the SRCM is improved by using the proposed SRC equation than the average SRC's which were estimated from the CC-SSM. The root mean square error (RMSE) of the SRCM with the proposed SRC equation for concrete with creep coefficient less than 3 was less than 1.2% to the creep deformation at the free condition and was 3.3% for the 99% reliability. The proposed SRC equation reflects the internal restraint of composite sections, and the effective modulus of elasticity computed with the proposed SRC can be used effectively to estimate the rigidity of a composite section in a numerical analysis which can be applied in analysis of the external restrain effect of boundary conditions.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.193-198
• /
• 1995

The changes in the rheological properties of soybean curd upon the various storage temperatures ($5{\sim}25^{\circ}C$) were measured by the stress-relaxation test and analysed by time-temperature superposition theory. As the storage temperature was lower, higher initial and equilibrium stress of soybean curd were observed. When the stress-relaxation curves were moved horizontally by using the shift-factor on the basis of reference temperature, the master curve was obtained. By applying master curve and shift-factor to the WLF (Williams-Landel-Ferry) equation, activation energy (30kcal/mol) was calculated and storage time at the specific temperature could be predicted, suggesting the equivalent shelf-life of soybean curd texture.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1050-1059
• /
• 2019

The self diffusion, hole volume, and flow thermodynamic parameters of polyamide fibers were calculated from rheological parameters and crystallite size in order to study of flow segments in amorphous region. The stress relaxation of polyamide filament fibers were carried out in air and various solvents at various temperatures using the tensile tester with the solvent chamber. The rheological parameters were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Ree-Eyring and Maxwell non-Newtonian model. It was observed that the rheological parameters of these polyamide filament fibers are directly related to the relaxation spectra, self diffusion, viscosities, and activation energies of flow segments.

• Women's Health Nursing
• /
• v.8 no.4
• /
• pp.608-618
• /
• 2002

The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Statistic average and standard deviation were generated by using SPSS PC+, t-test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups(lower group : freshmen, sophomore upper group : junior, senior) indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by C(t=2.28, p=.023). In the psychological energy level of ego states, both groups indicated average level.2) Stress coping style of whole students were highly and affirmatively dedicated to research. Consecutive consequences follow like this(high to low) : the central point of problem, search for social support, hopeful aspect and indifference. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation 3) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, hopeful aspect, search for social support, positive interest and relaxation of tension. In type NP, sequences such as the central point of problem, search for social support, positive interest and relaxation of tension were emerged with little differences. In type A, the central point of problem, positive interest and relaxation of tension. In type FC, hopeful aspect, search for social support, positive interest and relaxation of tension. In type AC, hopeful aspect and indifference were derived significantly different(p<.05). 4) In the aspect of relation between ego states and coping style, type CP presented the central point of problem and relaxation of tension, type NP presented positive interest, search for social support and the central point of problem, type A showed the central point of problem, positive interest and relaxation of tension, type FC showed relaxation of tension, positive interest, search for social support, indifference and the central point of problem, type AC showed hopeful aspect, indifference and the central point of problem. All the sequence shown above had high-to-low procedure and represented static relations each other(p<.05).

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1085-1091
• /
• 1998

The purpose of this study was to investigate the rheological properties of surimi gels and imitation crab-leg products by stress-relaxation test and to examine the correlations between stress-relaxation parameters and T.P.A. parameters. The linear viscoelasticity of surimi gels and imitation crab-leg products was observed in the range of the strain of $5{\sim}20%$ at cross-head speed 2.4 mm/sec. The average tensile forces of surimi gels and imitation crab-leg products were similar, 370.4 g and 436.4 g, respectively, but surimi gels showed higher relaxation time and viscous component (17256.1 sec, $1.357{\times}10^{10}$ poise) than those of imitation crab-leg products (6110 sec, $0.519^{\ast}10^{10}$ poise). Estimated tensile force of each exponential term in relaxation test was highly related with hardness, gumminess and chewiness of T.P.A (r=0.93, 0.93, 0.95, p<0.01), the relaxation time of each exponential term was rrelated with cohesiveness (r=0.89, p<0.01) of T.P,A. and the elastic component of exponential term with gumminess, chewiness and hardness (r=0.92, 0.94, 0.93. p<0.01) of T.P.A.. The viscous component of exponential term was related with cohesiveness (r=0.83, p<0.05) of T.P.A.. The degree of texturization was negatively related with the relaxation time and viscous component (r=-0.92, -0.96, p<0.01).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.167-170
• /
• 2003

Thermal elastic-plastic analysis was performed to assess the initial residual stress distribution of welded joints considering temperature dependent material properties. The test model was the idealized boxing fillet specimen, frequently appeared in the joints of longitudinal and transverse members of ship structure. Residual stress relaxations due to external loads were analyzed by subsequent elastic-plastic analysis considering loading and unloading steps, and the characteristics of residual stress relaxations were discussed with the levels of external loads. Additionally, to define the fatigue life of crack initiation and propagation, the S-N data for each crack length were appraised.