• 지구물리와물리탐사
• /
• 제13권2호
• /
• pp.137-143
• /
• 2010

2000년 12월 9일 경북 영덕 해역에서 국지규모$(M_L)$ 3.7의 지진이 발생하였다. Chang and Baag (2006) 지각속도구조 모델을 적용할 경우 진앙의 위치는 $36.4462^{\circ}N,\;129.9789^{\circ}E$이며, 지체구조구상 한반도 대륙붕에 해당한다. 동해에서 대륙지각이 해양지각으로 변이되는 점을 고려하여 지각의 두께를 5 km 얇게 조정한 모델을 사용해도 진앙 위치의 변화는 거의 없었다. 파형역산을 두 모델에 적용하여 지진의 깊이와 발진기구를 계산하였다. 영덕 해역 지진의 깊이는11 ~ 12 km로 계산되었다. 지진모멘트는 $1.0{\times}10^{15}N{\cdot}m$로 추정되었는데, 이 값은 모멘트규모$(M_W)$ 3.9에 해당한다. 영덕해역 지진은 2004년 5월 29일에 발생한 울진 해역 지진과 함께 전형적인 역단층 특성을 보여주며, P축의 방향은 동남동-서북서 방향이다. 스펙트럼 분석을 통해 추정된 모멘트규모는 4.0이며, 이는 파형역산에 의해 추정된 모멘트규모와 거의 비슷하다. 평균 응력강하는 3.4 MPa로 추정되었다.

• 지구물리와물리탐사
• /
• 제13권3호
• /
• pp.198-202
• /
• 2010

20세기에 한반도 및 인근에서 발생한 지진 중, 그 메카니즘이 Waveform Modelling 혹은 Moment Tensor Inversion 등 정량적인 방법에 의해 밝혀진 규모 4.5 이상의 18개 지진의 발생 원인을 분석하고 이들을 한반도 주변 동아시아 지역에서 발생하는 지진들과 비교 분석하였다. 한반도 및 인접지역에서 발생한 지진의 대부분은 주향이동 단층 운동에 의한 메카니즘에 다소의 역단층 운동이 첨가된 단층운동을 보여주고 단층작용을 일으킨 주응력 방향은 거의 수평한 동북 동-서남서 방향을 나타낸다. 이는 같은 판내 지역인 북동부 중국 지역과 일본 남서부의 주응력 방향과 매우 유사하고 동해 동부와는 상당한 차이를 보인다. 이는 한반도 및 그 주변에서 지진을 일으키는 주응력은 동쪽에서 유라시아판 밑으로 침강하는 태평양판의 영향뿐만 아니라 서남쪽에서 충돌하는 인도판의 영향도 상당히 작용하는 것으로 해석된다.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.317-325
• /
• 2008

최근 연구결과 레일연마 및 장대레일화로 누적통과톤수에 의한 레일교체기준의 연장이 가능한 것으로 보고되었다. 본 연구에서는 현재 도시철도에서 사용 중인 대표 궤도구조에 대해 실운행 열차하중에 의한 궤도의 동적 응답을 분석하여 현 궤도의 상태평가를 하였으며 궤도의 상태 변화에 따른 레일의 부담력을 검토하였다. 또한, 측정된 응력파형을 Rainflow Count Method를 이용하여 응력히스토그램을 작성하고 등가응력을 상정하여 신규 레일 용접부의 S-N 선도에 적용함으로써 노후레일의 누적피로손상도 및 휨 피로수명을 산정하였다. 최종적으로 본 연구에서는 궤도구조 및 상태를 고려한 레일교체기준의 개정을 제안하고자 하였다.

• Journal of Yeungnam Medical Science
• /
• 제8권1호
• /
• pp.63-71
• /
• 1991

저자들은 1990년 5월 1일부터 1991년 4월 30일까지 영남대학교 의과대학 부속병원 산부인과에 정기검진을 위해 내원한 157명의 정상 임산부를 대상으로 제대동맥에서 시행한 도플러초음파 160회의 검사 결과를 엄신 주수에 따라 분석하여 다음과 같은 결과를 얻었다. 제대동맥의 최고 수축기 혈류속도는 임신이 진행함에 따라 증가 양상을 보임으로써 임신이 증가함에 따라 제대 동맥 혈류량은 증가함을 관찰할 수 있었다. 임신이 진행함에 따라 제대태반 순환계 말초 저항이 점차적으로 감소함으로 인해 제대동액 이완기말 혈류속도도 중가 양상을 보였다. S/D ratio는 최고 수축기 혈류속도의 증가에도 불구하고 이완기말 혈류속도의 점차적인 증가로 인하여 임신이 진행함에 따라 오히려 감소함을 관찰할 수 있었다. 임신이 지속함에 따라 PI, RI도 감소하는 양상을 보였다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.548-554
• /
• 1994

The high temperature fatigue crack growth behavior of SUS 304 stainless steel at $550^{\circ}C$ and $650^{\circ}C$ was investigated under various kinds of stress ratio and frequency in sinusoidal waveform on the basis of the non-linear fracture mechanics. The result arranging crack growth rate by modified J-integral J' showed influence of stress ratio and frequency. All the data obtained under the test at $550^{\circ}C$ were plotted within data band of da/dN-${\triangle}J_f$ relationship for cycle-dependent crack growth. On the basis of static creep and cycle-dependent data band; both time- and cycle-dependent crack growth behavior was observed under loading conditions at $650^{\circ}C$, but cycle-dependent crack growth behavior predominantly appeared and time-dependent crack growth behaviour was little observed under loading conditions at $550^{\circ}C$. Fractographic examinations for fracture surface indicated that the fracture mode was generally transgranular. The stripes were found on fracture surface and each stripe was accompanied by a crack tip blunting and an abrupt increase in the load-point displacement. The $J'_{an}$ had a validity in case of $650^{\circ}C, but scarcely had it in case of $550^{\circ}C$.

• 한국주조공학회지
• /
• 제38권2호
• /
• pp.48-54
• /
• 2018

To improve the durability of the turbocharger, it is important to suppress cracking of the turbine housing; therefore, we investigated the initiation and growth of these cracks. First, we initiated a crack in the turbine housing using endurance experiments. After the endurance test, cracks mainly occurred in the valve seat, the nozzle area, and the scroll part of the turbine housing. The results of a fracture analysis of the cracks showed that cracks in the valve seat were initiated by fatigue fracture. This seems to be caused by the accumulation of mechanical and thermal stresses due to vibration of the turbine wheel and high-temperature exhaust gas. Also, cracks in nozzle and scroll area were initiated by intergranular corrosion due to the exhaust gas. Thus, although there are differences in the cause of initiation according to the site, a concentric waveform was observed in all fracture planes. This phenomenon indicates that cracks gradually grow due to repeated stress changes, and the main causes are the temperature difference of the exhaust gas and the vibration caused by the turbine shaft.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1597-1604
• /
• 2016

The speed at which the SRM (Switched Reluctance Motor) makes a transition from chopping control to single pulse operation. (i.e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on energy efficient C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.28-32
• /
• 2004

In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1197-1207
• /
• 2014

Common-mode voltage (CMV) causes overvoltage stress to winding insulation and damages AC motors. CMV with high dv/dt causes leakage currents, which create noise problems for equipment installed near the converter. This study proposes a new pulse-width modulation (PWM) strategy for three-level T-type NPC inverters. This strategy substantially eliminates CMV. The principle for selecting suitable triangle carrier signals for the three-level T-type NPC is described. The proposed method can mitigate the peak value of CMV by 50% compared with the phase disposition pulse-width modulation method. Furthermore, the proposed method exhibits better harmonic spectrum and lower root mean square value for the CMV than those of the reduced-CMV method on the basis of the phase opposition disposition PWM scheme with modulation index higher than 0.5. The proposed modulation can easily be implemented using software without any additional hardware modifications. Both simulation and experimental results demonstrate that the proposed carrier phase-shift PWM method has good output waveform performance and reduces CMV.