• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.23-32
• /
• 2023

The seismic performance of buried PE pipes is reported to be favorable due to their exceptional elongation capacity at break. Although a seismic performance evaluation procedure based on the response displacement method has been summarized in Korea for fusion-bonded PE pipes, there is currently no procedure available for mechanically jointed PE pipes. This article aims to present a seismic performance evaluation procedure based on the response displacement method specifically designed for mechanically jointed PE pipes in Korea. When employing the mechanical joining method for PE pipes, it is recommended to adhere to the evaluation procedure established for segment-type pipes. This involves assessing the stress induced by the pipe, the expansion and contraction strain of the joint, and the bending angle of the pipe joint. Furthermore, the coefficient of inhomogeneity of the soil, which is necessary for estimating the axial strain of the ground, is introduced. Additionally, a computation method for determining lateral displacement and reconsolidation settlement in soil susceptible to liquefaction is proposed. As a result of the sensitivity analysis considering the typical soil condition in Korea, the mechanically jointed PE pipe with a certain quality was shown to have good structural seismic safety when soil liquefaction was not considered. This procedure serves as a valuable tool for seismic design and evaluating the seismic performance of mechanically joined buried PE pipes, which are primarily utilized for connecting small-diameter pipes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.251-258
• /
• 2009

In this study, the optimum design conditions for embankment construction on soft clay layer improved by soil compaction pile (SCP) are discussed by comparing the practical design method to the reliability design which is based on the loss function and advanced first order second moment (AFOSM) method. The results are summarized as follows; 1) the relationship between safety factor and failure probability becomes heavy exponentially, failure probability decreases rapidly till 1% approximately until safety factor is smaller than 1.2 and after then, failure probability decrease gradually along the increase of the safety factor. The design safety factor of 1.2 may be the critical value that has been established on considering both relationships appropriately, 2) the safety factor of 1.15 at the minimum expected total cost is a little smaller than the design safety factor of 1.2 and the failure probability is about 1%, 3) the sensitivities of the ratio of stress share and the internal friction angle of sand is larger than the variables related the undrained shear strength of soft layer. This result means that the distribution characteristic of n and ${\phi}$ influences on the stability analysis considerably and they should be considered necessarily on stability analysis of embankment on soft layer improved by SCP, 4) new failure points of the input variables at the design safety factor of 1.2(below failure probability of 0.1~0.3%) is far 1~2 times of standard deviation from the initial design values of themselves.

• Mood & Emotion
• /
• v.10 no.1
• /
• pp.13-21
• /
• 2012

Suicide is a complex behavior associated with various neurobiological and psychosocial factors. It is considered that genetic polymorphism combined with environmental stress such as child-adolescent trauma make differences in neurobiological systems, which cause psychiatric disorders or pessimistic personality, impulse-aggressive behaviors, lack of judgment, and finally result in suicidal behavior. Much progress in the neurobiology of suicide has been made over the several decades. There seems to be a hereditary disposition to suicide independent of psychiatric disorder. The changes in neurotransmitters, neurohormones, neurotrophic factors, cytokines, lipid metabolisms related with their genetic polymorphism can contribute to disturbance of signal transductions and neuronal circuits vulnerable to suicide. It is likely that the main factors are dysfunctions of serotonin (5-HT) and hypothalamus-pituitary-adrenal (HPA) axis. Our understanding about the neurobiology of suicide is still limited. However, clinical practice could be assisted by neurobiological findings capable of making the detection of risk populations with higher sensitivity and the development of new treatment interventions. The settlement of biological markers in suicidal behaviors and their relationships is required.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.79-102
• /
• 2023

Objective : Autistic Spectrum Disorders(ASD) is a developmental disorder characterized by atypical sensory adaptation, communication problem, stereotyped behavior, and feeding disorders. The reasons for ASD feeding disorders are oral sensory motor, cognitive, behavioral, and social problems. Major symptoms include picky eating, selective eating, food refusal, food neophobia, limited food variety, and food aversion. ASD feeding disorders could be accompanied by various problems such as health and nutrition intake problems, feeding development, eating-related sociability, and family and caregiver stress. Feeding problems and disorders in ASD can present from birth. However, ASD is diagnosed by the age of 3, and there might be an appropriate treatment gap. Usually, symptoms of feeding disorders tend to decrease with age. However, the symptoms often remain, so early evaluation, intervention, and periodic checking are necessary. In this study, the general information about the feeding disorder characteristics of ASD, influencing factors, and intervention were described through a literature review. Conclusion : Sensory-based therapy and behavior-based therapies are generally used for feeding disorders in ASD. Sensory-based therapy is effective for food sensitivity and behavior-based therapy for food selection. As the symptoms of feeding disorders in ASD are diverse, a comprehensive approach includes play and participation, oral motor exercise, diet, and daily life. However, appropriate evaluation, intervention protocol, and guidelines for the treatment of feeding disorders in ASD are limited. Therefore, a complex approach based on a more systematic understanding is needed. Feeding rehabilitation specialists, such as occupational therapists, should provide appropriate evaluation and intervention.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.4
• /
• pp.267-274
• /
• 2024

Hydrogen embrittlement fracture poses a challenge in ensuring the structural integrity of materials exposed to hydrogen-rich environments. This study advances our comprehension of hydrogen-induced fracture through an integrated numerical modeling approach. In addition, it employs a ductile fracture model named the Gurson-cohesive model (GCM) and hydrogen diffusion analysis. GCM is employed as a fracture model that combines the Gurson model to illustrate the continuum damage evolution and the cohesive zone model to describe crack surface discontinuity and softening behavior. Moreover, porosity and stress triaxiality are considered as crack initiation criteria . A hydrogen diffusion analysis is also integrated with the GCM to account for hydrogen enhanced decohesion (HEDE) mechanisms and their subsequent impacts on crack initiation and propagation. This framework considers the influence of hydrogen on the softening behavior of the traction-separation relationship on the discontinuous crack surface. Parametric studies explore the sensitivity to diffusion properties and hydrogen-induced fracture properties. By combining numerical models of hydrogen diffusion and the ductile fracture model, this study provides an understanding of hydrogen-induced fracture and thereby contributes significantly to the ongoing efforts to design materials that are resilient to hydrogen embrittlement in practical engineering applications.

• Radiation Oncology Journal
• /
• v.15 no.3
• /
• pp.197-206
• /
• 1997

Purpose : Phospholipase D (PLD) catalyzes the hydrolysis of phosphatidylcholine to phosphatidic acid (PA) and choline. Recently, PLD has been drawing much attentions and considered to be associated with cancer Process since it is involved in cellular signal transduction. In this experiment, oleate-PLD activities were measured in various tissues of the living rats after whole body irradiation. Materials and Methods : The reaction mixture for the PLD assay contained $0.1\;\muCi\;1,2-di[1-^{14}C]palmitoyl$ phosphatidylcholine 0.5mM phosphatidylcholine, 5mM sodium oleate, $0.2\%$ taurodeoxycholate, 50mM HEPES buffer(pH 6.5), 10mM $CaCl_2$, and 25mM KF. phosphatidic acid, the reaction product, was separated by TLC and its radioactivity was measured with a scintillation counter. The whole body irradiation was given to the female Wistar rats via Cobalt 60 Teletherapy with field size of 10cmx loom and an exposure of 2.7Gy per minute to the total doses of 10Gy and 25Gy. Results : Among the tissues examined, PLD activity in lung was the highest one and was followed by kidney, skeletal muscle, brain, spleen, bone marrow, thymus, and liver. Upon irradiation, alteration of PLD activity was observed in thymus, spleen, lung, and bone marrow. Especially PLD activities of the spleen and thymus revealed the highest sensitivity toward $\gamma-rar$ with more than two times amplification in their activities In contrast, the PLD activity of bone marrow appears to be reduced to nearly $30\%$. Irradiation effect was hardly detected in liver which showed the lowest PLD activity. Conclusion : The PLD activities affected most sensitively by the whole-body irradiation seem to be associated with organs involved in immunity and hematopoiesis. This observation s1ron91y indicates that the PLD is closely related to the physiological function of these organs, Furthermore, radiation stress could offer an important means to explore the phenomena covering from cell Proliferation to cell death on these organs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.149-158
• /
• 2018

Agriculture is strongly influenced by climate change such as increased temperature and carbon dioxide ($CO_2$). This study describes the effects of climate change elevated $CO_2$, temperature, and relative drought on growth responses and yield in potato (Solanum tuberosum L.). The assessment was conducted for spring seasons in Soil-Plant-Atmosphere Research (SPAR) chamber at National Institute of Crop Science (NICS). Potatoes exhibit a positive response to $CO_2$ enrichment but water stress primarily reduces potato canopy and tuber yield. Elevated $CO_2$ and temperature increased both dry weight and tuber yield. Elevated $CO_2$ and temperature influenced SPAR 2 plants to a larger, and tuber increased yield up to 28% of than in SPAR 1(30-year average temperature at 450 ppm of $CO_2$). Our study findings indicate that tuber yield increase in potato under high $CO_2$ concentration was due to an increase in the size of individual tubers rather than in the number of the tubers per plant. On other hand, SPAR 3(30-year average temperature $+2.8^{\circ}C$ at 700 ppm of $CO_2$ under water stress) was lower than SPAR 2(30-year average temperature $+2.8^{\circ}C$ at 700 ppm of $CO_2$) nearly 56% of tuber yield due to drought. The results confirm potato drought sensitivity in terms of yield response. The experiment also showed that, in the conditions of climate change, climate change scenarios that improve cropping systems with potato.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.285-291
• /
• 2008

Purpose: Although automatic quantification software of myocardial perfusion SPECT provides highly objective and reproducible quantitative measurements, there is still some limitation in the direct use of quantitative measurements. In this study we derived parameters using normal variation of perfusion measurements, and tried to test the usefulness of these parameters. Materials and Methods: In order to calculate normal variation of perfusion measurements on myocardial perfusion SPECT, 55 patients (M:F = 28:27) of low-likelihood for coronary artery disease were enrolled and $^{201}TI$ rest/$^{99m}Tc$-MIBI stress SPECT studies were performed. Using 20-segment model, mean (m) and standard deviation (SD) of perfusion were calculated in each segment. As a myocardial viability assessment group, another 48 patients with known coronary artery disease, who underwent coronary artery bypass graft surgery (CABG) were enrolled. $^{201}TI$ rest/$^{99m}Tc$-MIBI stress / $^{201}TI$ 24-hr delayed SPECT was performed before CABG and SPECT was followed up 3 months after CABG. From the preoperative 24-hr delayed SPECT, $Q_{delay}$ (perfusion measurement), ${\Delta}_{delay}$ ($Q_{delay}$ - m) and $Z_{delay}$ (($Q_{delay}$ - m)/SD) were defined and diagnostic performances of them for myocardial viability were evaluated using area under curve (AUC) on receiver operating characteristic (ROC) curve analysis. Results: Segmental perfusion measurements showed considerable normal variations among segments. In men, the lowest segmental perfusion measurement was $51.8{\pm}6.5$ and the highest segmental perfusion was $87.0{\pm}5.9$, and they are $58.7{\pm}8.1$ and $87.3{\pm}6.0$, respectively in women. In the viability assessment $Q_{delay}$ showed AUC of 0.633, while those for ${\Delta}_{delay}$ and $Z_{delay}$ were 0.735 and 0.716, respectively. The AUCs of ${\Delta}_{delay}$ and $Z_{delay}$ were significantly higher than that of $Q_{delay}$ (p = 0.001 and 0.018, respectively). The diagnostic performance of ${\Delta}_{delay}$, which showed highest AUC, was 85% of sensitivity and 53% of specificity at the optimal cutoff of -24.7. Conclusion: On automatic quantification of myocardial perfusion SPECT, the normal variation of perfusion measurements were considerable among segments. In the viability assessment, the parameters considering normal variation showed better diagnostic performance than the direct perfusion measurement. This study suggests that consideration of normal variation is important in the analysis of measurements on quantitative myocardial perfusion SPECT.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.2
• /
• pp.122-129
• /
• 2016

It is important to know the sensitivity of shrubs to de-icing salt in order to set guidelines for ecological tolerance of evergreen shrubs along roads. Therefore, the aim of this study was to investigate the influence of de-icing salt, calcium chloride($CaCl_2$), on the growth and physiological characteristics of three evergreen shrubs, Euonymus japonica, Rhododendron indicum, and Buxus koreana. Plants were exposed to calcium chloride at different concentrations(weight percentage, 0% as control, 1.0%, 3.0%, and 5.0%) through amended soil maintained from the start of the experiment in October of 2014 until termination in March of 2015. The survival rate, plant height, leaf length, leaf width, leaf shape index, number of leaves, fresh weight, dry weight, dry matter, root/top ratio, chlorophyll contents, fluorescence, photosynthesis, stomatal conduct, and transpiration rate were recorded. Elevated calcium chloride concentrations decreased plant height, leaf length, leaf width, leaf shape index, fresh weight, dry weight, dry matter, and R/T ratio of the three shrubs. Root growth responded more sensitively than the top growth to salinity. However Euonymus japonica was more tolerant to salt stress than Rhododendron indicum and Buxus koreana. Their growths were totally inhibited by $CaCl_2$ above 3.0% and 1.0% concentrations, respectively. Chlorophyll content, fluorescence, photosynthesis, stomatal conduct, and transpiration rate of both Rhododendron indicum and Buxus koreana were reduced sharply, while Euonymus japonica exhibited mild reductions compared to plants grown in control when increasing calcium chloride was used. Especially, the transpiration rates of Rhododendron indicum, and the photosynthesis and stomatal conduct of Buxus koreana were suppressed as the concentrations of calcium chloride increased. Therefore, Euonymus japonica should be considered as an ecologically tolerant species with proven tolerance to de-icing salt.